On 20/05/18 14:49, Nipun Gupta wrote:
With of_pci_map_rid available for all the busses, use the function
for configuration of devices on fsl-mc bus
FWIW I had a quick hack at factoring out the commonality with
of_pci_iommu_init(), at which point I reckon this change is easier to
follow as-is for the moment, so:
Reviewed-by: Robin Murphy <robin.murphy@xxxxxxx>
Signed-off-by: Nipun Gupta <nipun.gupta@xxxxxxx>
---
drivers/iommu/of_iommu.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
index 811e160..284474d 100644
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -24,6 +24,7 @@
#include <linux/of_iommu.h>
#include <linux/of_pci.h>
#include <linux/slab.h>
+#include <linux/fsl/mc.h>
#define NO_IOMMU 1
@@ -159,6 +160,23 @@ static int of_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data)
return err;
}
+static int of_fsl_mc_iommu_init(struct fsl_mc_device *mc_dev,
+ struct device_node *master_np)
+{
+ struct of_phandle_args iommu_spec = { .args_count = 1 };
+ int err;
+
+ err = of_map_rid(master_np, mc_dev->icid, "iommu-map",
+ "iommu-map-mask", &iommu_spec.np,
+ iommu_spec.args);
+ if (err)
+ return err == -ENODEV ? NO_IOMMU : err;
+
+ err = of_iommu_xlate(&mc_dev->dev, &iommu_spec);
+ of_node_put(iommu_spec.np);
+ return err;
+}
+
const struct iommu_ops *of_iommu_configure(struct device *dev,
struct device_node *master_np)
{
@@ -190,6 +208,8 @@ const struct iommu_ops *of_iommu_configure(struct device *dev,
err = pci_for_each_dma_alias(to_pci_dev(dev),
of_pci_iommu_init, &info);
+ } else if (dev_is_fsl_mc(dev)) {
+ err = of_fsl_mc_iommu_init(to_fsl_mc_device(dev), master_np);
} else {
struct of_phandle_args iommu_spec;
int idx = 0;
