[patchV2 2/2] pci/shpchp: no claim on pcie port device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Linux Device Driver Model allows a physical device to be handled
by only a single driver. But at present, both shpchp and portdrv_pci
claim PCI_CLASS_BRIDGE_PCI, and touch devices_kset when the drivers are
loaded. This causes a few problems, one is the wrong shutdown seq of
devices, owing to the broken devices_kset. This patch keeps shpchp away
from pcie port device, using the extra matching method.

Note:
I hit this bug on a Power9 machine, when "kexec -e", and see a ata-disk
behind a bridge can not write back buffer in flight due to the former
shutdown of the bridge which clears the BusMaster bit.

the device involved:
0004:00:00.0 PCI bridge: IBM Device 04c1 (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        NUMA node: 0
        Bus: primary=00, secondary=01, subordinate=12, sec-latency=0
        I/O behind bridge: 00000000-00000fff
        Memory behind bridge: 80000000-ffefffff
        Prefetchable memory behind bridge: 0006024000000000-0006027f7fffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] Express (v2) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 512 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM not supported, Exit Latency L0s <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 8GT/s, Width x4, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
                DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis+, LTR-, OBFF Disabled ARIFwd+
                LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
                         EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP+ FCP- CmpltTO+ CmpltAbrt+ UnxCmplt- RxOF- MalfTLP- ECRC+ UnsupReq- ACSViol-
                UESvrt: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                AERCap: First Error Pointer: 00, GenCap+ CGenEn+ ChkCap+ ChkEn+
        Capabilities: [148 v1] #19

Signed-off-by: Pingfan Liu <kernelfans@xxxxxxxxx>
---
 drivers/pci/hotplug/shpchp_core.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 1f0f969..85b4665 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -336,6 +336,18 @@ static void shpc_remove(struct pci_dev *dev)
 	kfree(ctrl);
 }
 
+static int shpc_extra_match(struct pci_dev *pdev)
+{
+	/* do not claim pcie port device */
+	if (pci_is_pcie(pdev) &&
+	    (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ||
+	     pci_pcie_type(pdev) == PCI_EXP_TYPE_UPSTREAM ||
+	     pci_pcie_type(pdev) == PCI_EXP_TYPE_DOWNSTREAM))
+		return -ENODEV;
+
+	return 0;
+}
+
 static const struct pci_device_id shpcd_pci_tbl[] = {
 	{PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x00), ~0)},
 	{ /* end: all zeroes */ }
@@ -345,6 +357,7 @@ MODULE_DEVICE_TABLE(pci, shpcd_pci_tbl);
 static struct pci_driver shpc_driver = {
 	.name =		SHPC_MODULE_NAME,
 	.id_table =	shpcd_pci_tbl,
+	.extra_match =	shpc_extra_match,
 	.probe =	shpc_probe,
 	.remove =	shpc_remove,
 };
-- 
2.7.4




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux