Commit de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
uses local_bh_disable()/enable(), because hv_pci_onchannelcallback() can
also run in tasklet context as the channel event callback.
With CONFIG_PROVE_LOCKING=y in the latest mainline, or
old kernels that don't have commit f71b74bca637 ("irq/softirqs: Use lockdep
to assert IRQs are disabled/enabled"), it turns out can we trigger a warning
at the beginning of __local_bh_enable_ip(), because the upper layer
irq code can call hv_compose_msi_msg() with local irqs disabled.
Let's fix the warning by switching to local_irq_save()/restore(). This
is not an issue because hv_pci_onchannelcallback() is not slow, and it
not a hot path.
Fixes: de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
Signed-off-by: Dexuan Cui <decui@xxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
Cc: Stephen Hemminger <sthemmin@xxxxxxxxxxxxx>
Cc: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
---
A trimmed version of the warning is:
IRQs not enabled as expected
WARNING: CPU: 0 PID: 408 at kernel/softirq.c:162 __local_bh_enable_ip+0xb0/0xe0
Call Trace:
hv_compose_msi_msg+0x209/0x462 [pci_hyperv]
irq_chip_compose_msi_msg+0x41/0x50
msi_domain_activate+0x1a/0x40
__irq_domain_activate_irq+0x59/0x90
irq_domain_activate_irq+0x25/0x40
__setup_irq+0x3ec/0x730
request_threaded_irq+0xfa/0x1a0
mlx4_init_eq_table+0x3c3/0x5f0 [mlx4_core]
mlx4_setup_hca+0x1db/0x750 [mlx4_core]
mlx4_load_one+0xad2/0x13b0 [mlx4_core]
mlx4_init_one+0x578/0x710 [mlx4_core]
local_pci_probe+0x1e/0x50
work_for_cpu_fn+0x10/0x20
process_one_work+0x1d4/0x5a0
worker_thread+0x1cb/0x3d0
kthread+0xf5/0x130
drivers/pci/host/pci-hyperv.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index 50cdefe..ad6a64d 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -1051,6 +1051,7 @@ static u32 hv_compose_msi_req_v2(
*/
static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
+ unsigned long flags;
struct irq_cfg *cfg = irqd_cfg(data);
struct hv_pcibus_device *hbus;
struct hv_pci_dev *hpdev;
@@ -1148,14 +1149,14 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
* the channel callback directly when channel->target_cpu is
* the current CPU. When the higher level interrupt code
* calls us with interrupt enabled, let's add the
- * local_bh_disable()/enable() to avoid race.
+ * local_irq_save()/restore() to avoid race.
*/
- local_bh_disable();
+ local_irq_save(flags);
if (hbus->hdev->channel->target_cpu == smp_processor_id())
hv_pci_onchannelcallback(hbus);
- local_bh_enable();
+ local_irq_restore(flags);
if (hpdev->state == hv_pcichild_ejecting) {
dev_err_once(&hbus->hdev->device,
--
2.7.4
