On 05/22/2018 05:28 PM, Rajat Jain wrote:
> Add the following AER sysfs stats to represent the counters for each
> kind of error as seen by the device:
>
> dev_total_cor_errs
> dev_total_fatal_errs
> dev_total_nonfatal_errs
>
> Signed-off-by: Rajat Jain <rajatja@xxxxxxxxxx>
> ---
> drivers/pci/pci-sysfs.c | 3 ++
> drivers/pci/pci.h | 4 +-
> drivers/pci/pcie/aer/aerdrv.h | 1 +
> drivers/pci/pcie/aer/aerdrv_errprint.c | 1 +
> drivers/pci/pcie/aer/aerdrv_stats.c | 72 ++++++++++++++++++++++++++
> 5 files changed, 80 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 366d93af051d..730f985a3dc9 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -1743,6 +1743,9 @@ static const struct attribute_group *pci_dev_attr_groups[] = {
> #endif
> &pci_bridge_attr_group,
> &pcie_dev_attr_group,
> +#ifdef CONFIG_PCIEAER
> + &aer_stats_attr_group,
> +#endif
> NULL,
> };
So if the device is removed as part of recovery, then these get reset,
right? So if the device fails intermittently, these counters would keep
getting reset. Is this the intent?
(snip)
> /**
> * pci_match_one_device - Tell if a PCI device structure has a matching
> diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
> index d8b9fba536ed..b5d5ad6f2c03 100644
> --- a/drivers/pci/pcie/aer/aerdrv.h
> +++ b/drivers/pci/pcie/aer/aerdrv.h
> @@ -87,6 +87,7 @@ void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info);
> irqreturn_t aer_irq(int irq, void *context);
> int pci_aer_stats_init(struct pci_dev *pdev);
> void pci_aer_stats_exit(struct pci_dev *pdev);
> +void pci_dev_aer_stats_incr(struct pci_dev *pdev, struct aer_err_info *info);
>
> #ifdef CONFIG_ACPI_APEI
> int pcie_aer_get_firmware_first(struct pci_dev *pci_dev);
> diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c
> index 21ca5e1b0ded..5e8b98deda08 100644
> --- a/drivers/pci/pcie/aer/aerdrv_errprint.c
> +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c
> @@ -155,6 +155,7 @@ static void __aer_print_error(struct pci_dev *dev,
> pci_err(dev, " [%2d] Unknown Error Bit%s\n",
> i, info->first_error == i ? " (First)" : "");
> }
> + pci_dev_aer_stats_incr(dev, info);
What about AER errors that are contained by DPC?
Alex
