Re: [PATCH v16 8/9] PCI/DPC: Unify and plumb error handling into DPC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2018-05-11 16:13, Oza Pawandeep wrote:
DPC driver implements link_reset callback, and calls
pci_do_fatal_recovery().

Which follows standard path of ERR_FATAL recovery.

Signed-off-by: Oza Pawandeep <poza@xxxxxxxxxxxxxx>

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 5e8857a..6af7595 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -354,7 +354,7 @@ static inline resource_size_t
pci_resource_alignment(struct pci_dev *dev,
 void pci_enable_acs(struct pci_dev *dev);

 /* PCI error reporting and recovery */
-void pcie_do_fatal_recovery(struct pci_dev *dev);
+void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service);
 void pcie_do_nonfatal_recovery(struct pci_dev *dev);

 bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c
b/drivers/pci/pcie/aer/aerdrv_core.c
index fdfc474..36e622d 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -254,7 +254,7 @@ static void handle_error_source(struct pcie_device *aerdev,
 	} else if (info->severity == AER_NONFATAL)
 		pcie_do_nonfatal_recovery(dev);
 	else if (info->severity == AER_FATAL)
-		pcie_do_fatal_recovery(dev);
+		pcie_do_fatal_recovery(dev, PCIE_PORT_SERVICE_AER);
 }

 #ifdef CONFIG_ACPI_APEI_PCIEAER
@@ -321,7 +321,7 @@ static void aer_recover_work_func(struct work_struct *work)
 		if (entry.severity == AER_NONFATAL)
 			pcie_do_nonfatal_recovery(pdev);
 		else if (entry.severity == AER_FATAL)
-			pcie_do_fatal_recovery(pdev);
+			pcie_do_fatal_recovery(pdev, PCIE_PORT_SERVICE_AER);
 		pci_dev_put(pdev);
 	}
 }
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 80ec384..5680c13 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -73,29 +73,31 @@ static void dpc_wait_link_inactive(struct dpc_dev *dpc)
 	pcie_wait_for_link(pdev, false);
 }

-static void dpc_work(struct work_struct *work)
+static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 {
-	struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
-	struct pci_dev *dev, *temp, *pdev = dpc->dev->port;
-	struct pci_bus *parent = pdev->subordinate;
-	u16 cap = dpc->cap_pos, ctl;
-
-	pci_lock_rescan_remove();
-	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
-					 bus_list) {
-		pci_dev_get(dev);
-		pci_dev_set_disconnected(dev, NULL);
-		if (pci_has_subordinate(dev))
-			pci_walk_bus(dev->subordinate,
-				     pci_dev_set_disconnected, NULL);
-		pci_stop_and_remove_bus_device(dev);
-		pci_dev_put(dev);
-	}
-	pci_unlock_rescan_remove();
-
+	struct dpc_dev *dpc;
+	struct pcie_device *pciedev;
+	struct device *devdpc;
+	u16 cap, ctl;
+
+	/*
+	 * DPC disables the Link automatically in hardware, so it has
+	 * already been reset by the time we get here.
+	 */
+
+	devdpc = pcie_port_find_device(pdev, PCIE_PORT_SERVICE_DPC);
+	pciedev = to_pcie_device(devdpc);
+	dpc = get_service_data(pciedev);
+	cap = dpc->cap_pos;
+
+	/*
+	 * Waiting until the link is inactive, then clearing DPC
+	 * trigger status to allow the port to leave DPC.
+	 */
 	dpc_wait_link_inactive(dpc);
+
 	if (dpc->rp_extensions && dpc_wait_rp_inactive(dpc))
-		return;
+		return PCI_ERS_RESULT_DISCONNECT;
 	if (dpc->rp_extensions && dpc->rp_pio_status) {
 		pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS,
 				       dpc->rp_pio_status);
@@ -108,6 +110,17 @@ static void dpc_work(struct work_struct *work)
 	pci_read_config_word(pdev, cap + PCI_EXP_DPC_CTL, &ctl);
 	pci_write_config_word(pdev, cap + PCI_EXP_DPC_CTL,
 			      ctl | PCI_EXP_DPC_CTL_INT_EN);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void dpc_work(struct work_struct *work)
+{
+	struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
+	struct pci_dev *pdev = dpc->dev->port;
+
+	/* From DPC point of view error is always FATAL. */
+	pcie_do_fatal_recovery(pdev, PCIE_PORT_SERVICE_DPC);
 }

 static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
@@ -288,6 +301,7 @@ static struct pcie_port_service_driver dpcdriver = {
 	.service	= PCIE_PORT_SERVICE_DPC,
 	.probe		= dpc_probe,
 	.remove		= dpc_remove,
+	.reset_link	= dpc_reset_link,
 };

 static int __init dpc_service_init(void)
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 33a16b1..29ff148 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -185,7 +185,7 @@ static pci_ers_result_t default_reset_link(struct
pci_dev *dev)
 	return PCI_ERS_RESULT_RECOVERED;
 }

-static pci_ers_result_t reset_link(struct pci_dev *dev)
+static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
 {
 	struct pci_dev *udev;
 	pci_ers_result_t status;
@@ -200,7 +200,7 @@ static pci_ers_result_t reset_link(struct pci_dev *dev)
 	}

 	/* Use the aer driver of the component firstly */
-	driver = pcie_port_find_service(udev, PCIE_PORT_SERVICE_AER);
+	driver = pcie_port_find_service(udev, service);

 	if (driver && driver->reset_link) {
 		status = driver->reset_link(udev);
@@ -287,7 +287,7 @@ static pci_ers_result_t
broadcast_error_message(struct pci_dev *dev,
  * followed by re-enumeration of devices.
  */

-void pcie_do_fatal_recovery(struct pci_dev *dev)
+void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service)
 {
 	struct pci_dev *udev;
 	struct pci_bus *parent;
@@ -313,7 +313,7 @@ void pcie_do_fatal_recovery(struct pci_dev *dev)
 		pci_dev_put(pdev);
 	}

-	result = reset_link(udev);
+	result = reset_link(udev, service);

 	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 		/*
diff --git a/include/linux/aer.h b/include/linux/aer.h
index 8f87bbe..0c506fe 100644
--- a/include/linux/aer.h
+++ b/include/linux/aer.h
@@ -14,6 +14,7 @@
 #define AER_NONFATAL			0
 #define AER_FATAL			1
 #define AER_CORRECTABLE			2
+#define DPC_FATAL			4

 struct pci_dev;


Hi Bjorn,


I have addressed all the comments, and I hope we are heading towards closure.

I just figure that pcie_do_fatal_recovery (which is getting executed for DPC as well)

if (result == PCI_ERS_RESULT_RECOVERED) {
                if (pcie_wait_for_link(udev, true))
                        pci_rescan_bus(udev->bus);
                pci_info(dev, "Device recovery successful\n");
        }

I have to correct it to

if (service==AER  && result == PCI_ERS_RESULT_RECOVERED) {
                if (pcie_wait_for_link(udev, true))
                        pci_rescan_bus(udev->bus);
                pci_info(dev, "Device recovery successful\n");
        }


rest of the things look okay to me.
If you have any more comments,
I can fix them with this one and hopefully v17 will be the final one.


PS: I am going though the code more, and we can have some follow up patches (probably some cleanup)
for e.g. pcie_portdrv_slot_reset()  checks
if (dev->error_state == pci_channel_io_frozen) {
		dev->state_saved = true;
		pci_restore_state(dev);
		pcie_portdrv_restore_config(dev);
		pci_enable_pcie_error_reporting(dev);
	}


but now since the ERR_FATAL path does not call pcie_portdrv_slot_reset the check is meaning less.

besides driver's shut_down callbacks might want to handle pci_channel_io_frozen, but that something left to be discussed later. So, I am not touching dev->error_state anywhere as of now in ERR_FATAL case.

Regards,
Oza.











































[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux