On Mon, Apr 23, 2018 at 06:34:23PM +0100, Ivan Kokshaysky wrote:
> On Sun, Apr 22, 2018 at 01:07:38PM -0700, Matt Turner wrote:
> > On Wed, Apr 18, 2018 at 1:48 PM, Ivan Kokshaysky
> > <ink@xxxxxxxxxxxxxxxxxxxx> wrote:
> > > On Tue, Apr 17, 2018 at 02:43:44PM -0500, Bjorn Helgaas wrote:
> > >> On Mon, Apr 16, 2018 at 09:43:42PM -0700, Matt Turner wrote:
> > >> > On Mon, Apr 16, 2018 at 2:50 PM, Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > >> > > Hi Matt,
> > >> > >
> > >> > > First of all, sorry about breaking Nautilus, and thanks very much for
> > >> > > tracking it down to this commit.
> > >> >
> > >> > It's a particularly weird case, as far as I've been able to discern :)
> > >> >
> > >> > > On Mon, Apr 16, 2018 at 07:33:57AM -0700, Matt Turner wrote:
> > >> > >> Commit f75b99d5a77d63f20e07bd276d5a427808ac8ef6 (PCI: Enforce bus
> > >> > >> address limits in resource allocation) broke Alpha systems using
> > >> > >> CONFIG_ALPHA_NAUTILUS. Alpha is 64-bit, but Nautilus systems use a
> > >> > >> 32-bit AMD 751/761 chipset. arch/alpha/kernel/sys_nautilus.c maps PCI
> > >> > >> into the upper addresses just below 4GB.
> > >> > >>
> > >> > >> I can get a working kernel by ifdef'ing out the code in
> > >> > >> drivers/pci/bus.c:pci_bus_alloc_resource. We can't tie
> > >> > >> PCI_BUS_ADDR_T_64BIT to ALPHA_NAUTILUS without breaking generic
> > >> > >> kernels.
> > >> > >>
> > >> > >> How can we get Nautilus working again?
> > >> > >
> > >> > > Can you collect a complete dmesg log, ideally both before and after
> > >> > > f75b99d5a77d? I assume the problem is that after f75b99d5a77d? we
> > >> > > erroneously assign space for something above 4GB. But if we know the
> > >> > > correct host bridge apertures, we shouldn't assign space outside them,
> > >> > > regardless of the PCI bus address size.
> > >> >
> > >> > I made a mistake in my initial report. Commit f75b99d5a77d is actually
> > >> > the last *working* commit. My apologies. The next commit is
> > >> > d56dbf5bab8c (PCI: Allocate 64-bit BARs above 4G when possible) and it
> > >> > breaks Nautilus I've confirmed.
> > >> >
> > >> > Please find attached dmesgs from those two commits, from the commit
> > >> > immediately before them, and another from 4.17-rc1 with my hack of #if
> > >> > 0'ing out the pci_bus_alloc_from_region(..., &pci_high) code.
> > >> >
> > >> > Thanks for having a look!
> > >>
> > >> We're telling the PCI core that the host bridge MMIO aperture is the
> > >> entire 64-bit address space, so when we assign BARs, some of them end
> > >> up above 4GB:
> > >>
> > >> pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffffffffff]
> > >> pci 0000:00:09.0: BAR 0: assigned [mem 0x100000000-0x10000ffff 64bit]
> > >>
> > >> But it sounds like the MMIO aperture really ends at 0xffffffff, so
> > >> that's not going to work.
> > >
> > > Correct... This would do as a quick fix, I think:
> > >
> > > diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
> > > index ff4f54b..477ba65 100644
> > > --- a/arch/alpha/kernel/sys_nautilus.c
> > > +++ b/arch/alpha/kernel/sys_nautilus.c
> > > @@ -193,6 +193,8 @@ static struct resource irongate_io = {
> > > };
> > > static struct resource irongate_mem = {
> > > .name = "Irongate PCI MEM",
> > > + .start = 0,
> > > + .end = 0xffffffff,
> > > .flags = IORESOURCE_MEM,
> > > };
> > > static struct resource busn_resource = {
> > > @@ -218,7 +220,7 @@ nautilus_init_pci(void)
> > > return;
> > >
> > > pci_add_resource(&bridge->windows, &ioport_resource);
> > > - pci_add_resource(&bridge->windows, &iomem_resource);
> > > + pci_add_resource(&bridge->windows, &irongate_mem);
> > > pci_add_resource(&bridge->windows, &busn_resource);
> > > bridge->dev.parent = NULL;
> > > bridge->sysdata = hose;
> >
> > Thanks. But with that I get
> >
> > PCI host bridge to bus 0000:00
> > pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
> > pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
> > pci_bus 0000:00: root bus resource [bus 00-ff]
> > pci 0000:00:10.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
> > pci 0000:00:10.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
> > pci 0000:00:10.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
> > pci 0000:00:10.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
> > pci 0000:00:10.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
> > pci 0000:00:10.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
> > pci 0000:00:10.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
> > pci 0000:00:10.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
> > pci 0000:00:11.0: quirk: [io 0x4000-0x403f] claimed by ali7101 ACPI
> > pci 0000:00:11.0: quirk: [io 0x5000-0x501f] claimed by ali7101 SMB
> > pci 0000:00:01.0: BAR 9: assigned [mem 0xc0000000-0xc2ffffff pref]
> > pci 0000:00:01.0: BAR 8: assigned [mem 0xc3000000-0xc3bfffff]
> > pci 0000:00:0b.0: BAR 6: assigned [mem 0xc3c00000-0xc3c3ffff pref]
> > pci 0000:00:08.0: BAR 6: assigned [mem 0xc3c40000-0xc3c5ffff pref]
> > pci 0000:00:09.0: BAR 0: assigned [mem 0xc3c60000-0xc3c6ffff 64bit]
> > pci 0000:00:03.0: BAR 0: assigned [mem 0xc3c70000-0xc3c70fff]
> > pci 0000:00:06.0: BAR 1: assigned [mem 0xc3c71000-0xc3c71fff]
> > pci 0000:00:08.0: BAR 1: assigned [mem 0xc3c72000-0xc3c72fff 64bit]
> > pci 0000:00:14.0: BAR 0: assigned [mem 0xc3c73000-0xc3c73fff]
> > pci 0000:00:0b.0: BAR 1: assigned [mem 0xc3c74000-0xc3c743ff]
> > pci 0000:00:03.0: BAR 1: assigned [io 0x8000-0x80ff]
> > pci 0000:00:06.0: BAR 0: assigned [io 0x8400-0x84ff]
> > pci 0000:00:08.0: BAR 0: assigned [io 0x8800-0x88ff]
> > pci 0000:00:0b.0: BAR 0: assigned [io 0x8c00-0x8c7f]
> > pci 0000:00:10.0: BAR 4: assigned [io 0x8c80-0x8c8f]
> > pci 0000:01:05.0: BAR 0: assigned [mem 0xc0000000-0xc1ffffff pref]
> > pci 0000:01:05.0: BAR 2: assigned [mem 0xc3000000-0xc37fffff]
> > pci 0000:01:05.0: BAR 6: assigned [mem 0xc2000000-0xc200ffff pref]
> > pci 0000:01:05.0: BAR 1: assigned [mem 0xc3800000-0xc3803fff]
> > pci 0000:00:01.0: PCI bridge to [bus 01]
> > pci 0000:00:01.0: bridge window [mem 0xc3000000-0xc3bfffff]
> > pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc2ffffff pref]
> >
> > Looks like the bridge window is overlapping with some previously assigned BARs?
>
> No, there are no overlaps. This is AGP bridge window with AGP card BARs
> inside it.
>
> > The result is the SCSI card failing to work:
> >
> > scsi host0: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
> > <Adaptec 29160 Ultra160 SCSI adapter>
> > aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> >
> > scsi0: ahc_intr - referenced scb not valid during SELTO scb(0, 255)
> > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> > scsi0: Dumping Card State while idle, at SEQADDR 0x18
> > [snip endless spew]
>
> It looks like Irongate PCI memory window setting is completely wrong,
> perhaps it starts at zero, so that PCI DMA doesn't work at all.
>
> Please try the patch below. It tries to fix things properly, but if
> PCI bus sizing fails for some reason, it falls back to a "safe" PCI
> memory window placement at 3GB.
Ping, Matt, any feedback on this patch?
> diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
> index ff4f54b..b1fb9fd 100644
> --- a/arch/alpha/kernel/sys_nautilus.c
> +++ b/arch/alpha/kernel/sys_nautilus.c
> @@ -187,10 +187,6 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
>
> extern void pcibios_claim_one_bus(struct pci_bus *);
>
> -static struct resource irongate_io = {
> - .name = "Irongate PCI IO",
> - .flags = IORESOURCE_IO,
> -};
> static struct resource irongate_mem = {
> .name = "Irongate PCI MEM",
> .flags = IORESOURCE_MEM,
> @@ -218,7 +214,7 @@ nautilus_init_pci(void)
> return;
>
> pci_add_resource(&bridge->windows, &ioport_resource);
> - pci_add_resource(&bridge->windows, &iomem_resource);
> + pci_add_resource(&bridge->windows, &irongate_mem);
> pci_add_resource(&bridge->windows, &busn_resource);
> bridge->dev.parent = NULL;
> bridge->sysdata = hose;
> @@ -238,20 +234,25 @@ nautilus_init_pci(void)
> pcibios_claim_one_bus(bus);
>
> irongate = pci_get_domain_bus_and_slot(pci_domain_nr(bus), 0, 0);
> + /* Pretend that it's not a root bus to allow sizing. */
> + bus->parent = bus;
> bus->self = irongate;
> - bus->resource[0] = &irongate_io;
> - bus->resource[1] = &irongate_mem;
>
> pci_bus_size_bridges(bus);
> -
> - /* IO port range. */
> - bus->resource[0]->start = 0;
> - bus->resource[0]->end = 0xffff;
> + bus->parent = NULL;
>
> /* Set up PCI memory range - limit is hardwired to 0xffffffff,
> base must be at aligned to 16Mb. */
> - bus_align = bus->resource[1]->start;
> - bus_size = bus->resource[1]->end + 1 - bus_align;
> + if (bus->resource[1]->end) {
> + bus_align = bus->resource[1]->start;
> + bus_size = bus->resource[1]->end + 1 - bus_align;
> + printk(KERN_INFO "PCI MEM size 0x%08lx, align 0x%08lx\n",
> + bus_size, bus_align);
> + } else {
> + bus_size = 0x100000000UL - memtop;
> + bus_align = bus_size;
> + printk(KERN_ERR "PCI MEM sizing failed, using 3GB limit\n");
> + }
> if (bus_align < 0x1000000UL)
> bus_align = 0x1000000UL;
>
