On 01/05/18 13:38, Sinan Kaya wrote:
> +Marc,
>
> On 4/30/2018 5:27 PM, Sinan Kaya wrote:
>> On 4/30/2018 5:17 PM, Bjorn Helgaas wrote:
>>>> What should we do about this?
>>>>
>>>> Since there is an actual HW errata involved, should we quirk this
>>>> root port and not wait as if remove/shutdown doesn't exist?
>>> I was hoping to avoid a quirk because AFAIK all Intel parts have this
>>> issue so it will be an ongoing maintenance issue. I tried to avoid
>>> the timeout delays, e.g., with 40b960831cfa ("PCI: pciehp: Compute
>>> timeout from hotplug command start time").
>>>
>>> But we still see the alarming messages, so we should probably add a
>>> quirk to get rid of those.
>>>
>>> But I haven't given up on the idea of getting rid of the
>>> pciehp_remove() path. I'm not convinced yet that we actually need to
>>> do anything to shut this device down. I don't like the assumption
>>> that kexec requires this. The kexec is fundamentally just a branch,
>>> and anything we do before the branch (i.e., in the old kernel), we
>>> should also be able to do after the branch (i.e., in the kexec-ed
>>> kernel).
>>>
>>
>> In my experience with kexec, MSI type edge interrupts are harmless.
>> You might just see a few unhandled interrupt messages during boot
>> if something is pending from the first kernel.
Unfortunately, that's not always the case.
A number of GICv3/v4 implementations (a very common interrupt controller
on ARM servers) cannot be disabled, which means they will keep writing
to their pending tables long after kexec will have started the new
kernel. And since we don't track memory allocation across kexec, you
end-up with significant chances of observing single bit corruption as
interrupts carry on being delivered. Oh, and you won't actually be able
to take MSIs because you can't even reprogram the damn thing.
Yes, this can be considered a HW bug.
>> It is the level interrupts that are more concerning. It remains pending
>> until the interrupt source is cleared. CPU never returns from the
>> interrupt handler to actually continue booting the second kernel.
>
> This makes me wonder why kexec doesn't disable all interrupt sources by
> itself instead of relying on the drivers shutdown routine. Some drivers
> don't even have a shutdown callback. Kexec could have done both as another
> example. Something like.
>
> 1. Call shutdown for all drivers if available.
> 2. Disable all interrupt sources in the interrupt controller
> 3. Start the new kernel.
See above. Although you can shut off the end-point and to some extent
mask interrupts before jumping into the payload, it is not always
possible to go back to a reasonable state where you can take actually MSIs.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
