This way we have one central definition of it, and user can select it as needed. The new option is not user visible, which is the behavior it had in most architectures, with a few notable exceptions: - On x86_64 and mips/loongson3 it used to be user selectable, but defaulted to y. It now is unconditional, which seems like the right thing for 64-bit architectures without guaranteed availablity of IOMMUs. - on powerpc the symbol is user selectable and defaults to n, but many boards select it. This change assumes no working setup required a manual selection, but if that turned out to be wrong we'll have to add another select statement or two for the respective boards. Signed-off-by: Christoph Hellwig <hch@xxxxxx> --- arch/arm/Kconfig | 3 --- arch/arm64/Kconfig | 4 +--- arch/ia64/Kconfig | 8 -------- arch/mips/Kconfig | 2 ++ arch/mips/cavium-octeon/Kconfig | 4 ---- arch/mips/loongson64/Kconfig | 7 ------- arch/powerpc/Kconfig | 9 --------- arch/unicore32/Kconfig | 1 + arch/unicore32/mm/Kconfig | 4 ---- arch/x86/Kconfig | 12 +----------- lib/Kconfig | 5 +++++ 11 files changed, 10 insertions(+), 49 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 90b81a3a28a7..676977bdfe33 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1773,9 +1773,6 @@ config SECCOMP and the task is only allowed to execute a few safe syscalls defined by each seccomp mode. -config SWIOTLB - bool - config PARAVIRT bool "Enable paravirtualization code" help diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 4d924eb32e7f..db51b6445744 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -144,6 +144,7 @@ config ARM64 select POWER_SUPPLY select REFCOUNT_FULL select SPARSE_IRQ + select SWIOTLB select SYSCTL_EXCEPTION_TRACE select THREAD_INFO_IN_TASK help @@ -239,9 +240,6 @@ config HAVE_GENERIC_GUP config SMP def_bool y -config SWIOTLB - def_bool y - config KERNEL_MODE_NEON def_bool y diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 685d557eea48..9485b5490eca 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -80,9 +80,6 @@ config MMU bool default y -config SWIOTLB - bool - config STACKTRACE_SUPPORT def_bool y @@ -139,7 +136,6 @@ config IA64_GENERIC bool "generic" select NUMA select ACPI_NUMA - select DMA_DIRECT_OPS select SWIOTLB select PCI_MSI help @@ -160,7 +156,6 @@ config IA64_GENERIC config IA64_DIG bool "DIG-compliant" - select DMA_DIRECT_OPS select SWIOTLB config IA64_DIG_VTD @@ -176,7 +171,6 @@ config IA64_HP_ZX1 config IA64_HP_ZX1_SWIOTLB bool "HP-zx1/sx1000 with software I/O TLB" - select DMA_DIRECT_OPS select SWIOTLB help Build a kernel that runs on HP zx1 and sx1000 systems even when they @@ -200,7 +194,6 @@ config IA64_SGI_UV bool "SGI-UV" select NUMA select ACPI_NUMA - select DMA_DIRECT_OPS select SWIOTLB help Selecting this option will optimize the kernel for use on UV based @@ -211,7 +204,6 @@ config IA64_SGI_UV config IA64_HP_SIM bool "Ski-simulator" - select DMA_DIRECT_OPS select SWIOTLB depends on !PM diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e10cc5c7be69..0f619b8c0e9e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -912,6 +912,7 @@ config CAVIUM_OCTEON_SOC select MIPS_NR_CPU_NR_MAP_1024 select BUILTIN_DTB select MTD_COMPLEX_MAPPINGS + select SWIOTLB select SYS_SUPPORTS_RELOCATABLE help This option supports all of the Octeon reference boards from Cavium @@ -1367,6 +1368,7 @@ config CPU_LOONGSON3 select MIPS_PGD_C0_CONTEXT select MIPS_L1_CACHE_SHIFT_6 select GPIOLIB + select SWIOTLB help The Loongson 3 processor implements the MIPS64R2 instruction set with many extensions. diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig index eb5faeed4f66..4984e462be30 100644 --- a/arch/mips/cavium-octeon/Kconfig +++ b/arch/mips/cavium-octeon/Kconfig @@ -67,10 +67,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY help Lock the kernel's implementation of memcpy() into L2. -config SWIOTLB - def_bool y - select DMA_DIRECT_OPS - config OCTEON_ILM tristate "Module to measure interrupt latency using Octeon CIU Timer" help diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig index 2a4fb91adbb6..c79e6a565572 100644 --- a/arch/mips/loongson64/Kconfig +++ b/arch/mips/loongson64/Kconfig @@ -130,13 +130,6 @@ config LOONGSON_UART_BASE default y depends on EARLY_PRINTK || SERIAL_8250 -config SWIOTLB - bool "Soft IOMMU Support for All-Memory DMA" - default y - depends on CPU_LOONGSON3 - select DMA_DIRECT_OPS - select NEED_DMA_MAP_STATE - config PHYS48_TO_HT40 bool default y if CPU_LOONGSON3 diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a4b2ac7c3d2e..1887f8f86a77 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -474,15 +474,6 @@ config MPROFILE_KERNEL depends on PPC64 && CPU_LITTLE_ENDIAN def_bool !DISABLE_MPROFILE_KERNEL -config SWIOTLB - bool "SWIOTLB support" - default n - ---help--- - Support for IO bounce buffering for systems without an IOMMU. - This allows us to DMA to the full physical address space on - platforms where the size of a physical address is larger - than the bus address. Not all platforms support this. - config HOTPLUG_CPU bool "Support for enabling/disabling CPUs" depends on SMP && (PPC_PSERIES || \ diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index 82195714d20b..03f991e44288 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -20,6 +20,7 @@ config UNICORE32 select GENERIC_IOMAP select MODULES_USE_ELF_REL select NEED_DMA_MAP_STATE + select SWIOTLB help UniCore-32 is 32-bit Instruction Set Architecture, including a series of low-power-consumption RISC chip diff --git a/arch/unicore32/mm/Kconfig b/arch/unicore32/mm/Kconfig index 45b7f769375e..82759b6aba67 100644 --- a/arch/unicore32/mm/Kconfig +++ b/arch/unicore32/mm/Kconfig @@ -39,7 +39,3 @@ config CPU_TLB_SINGLE_ENTRY_DISABLE default y help Say Y here to disable the TLB single entry operations. - -config SWIOTLB - def_bool y - select DMA_DIRECT_OPS diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 07b031f99eb1..aad35c568681 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -29,6 +29,7 @@ config X86_64 select HAVE_ARCH_SOFT_DIRTY select MODULES_USE_ELF_RELA select NEED_DMA_MAP_STATE + select SWIOTLB select X86_DEV_DMA_OPS select ARCH_HAS_SYSCALL_WRAPPER @@ -916,17 +917,6 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT Calgary anyway, pass 'iommu=calgary' on the kernel command line. If unsure, say Y. -# need this always selected by IOMMU for the VIA workaround -config SWIOTLB - def_bool y if X86_64 - select NEED_DMA_MAP_STATE - ---help--- - Support for software bounce buffers used on x86-64 systems - which don't have a hardware IOMMU. Using this PCI devices - which can only access 32-bits of memory can be used on systems - with more than 3 GB of memory. - If unsure, say Y. - config MAXSMP bool "Enable Maximum number of SMP Processors and NUMA Nodes" depends on X86_64 && SMP && DEBUG_KERNEL diff --git a/lib/Kconfig b/lib/Kconfig index 1f12faf03819..1d84e61cccfe 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -451,6 +451,11 @@ config DMA_VIRT_OPS depends on HAS_DMA && (!64BIT || ARCH_DMA_ADDR_T_64BIT) default n +config SWIOTLB + bool + select DMA_DIRECT_OPS + select NEED_DMA_MAP_STATE + config CHECK_SIGNATURE bool -- 2.17.0
