On Tue, 24 Apr 2018 10:54:26 -0400
James Puthukattukaran <james.puthukattukaran@xxxxxxxxxx> wrote:
> The IDT switch incorrectly flags an ACS source violation on a read config
> request to an end point device on the completion (IDT 89H32H8G3-YC,
> errata #36) even though the PCI Express spec states that completions are
> never affected by ACS source violation (PCI Spec 3.1, Section 6.12.1.1). Here's
> the specific copy of the errata text
>
> "Item #36 - Downstream port applies ACS Source Validation to Completions
> Section 6.12.1.1 of the PCI Express Base Specification 3.1 states
> that completions are never affected
> by ACS Source Validation. However, completions received by a
> downstream port of the PCIe switch from a device that has not yet
> captured a PCIe bus number are incorrectly dropped by ACS source
> validation by the switch downstream port.
>
> Workaround: Issue a CfgWr1 to the downstream device before issuing
> the first CfgRd1 to the device.
> This allows the downstream device to capture its bus number; ACS
> source validation no longer stops
> completions from being forwarded by the downstream port. It has been
> observed that Microsoft Windows implements this workaround already;
> however, some versions of Linux and other operating systems may not. "
>
> The suggested workaround by IDT is to issue a configuration write to the
> downstream device before issuing the first config read. This allows the
> downstream device to capture its bus number, thus avoiding the ACS
> violation on the completion. In order to make sure that the device is ready
> for config accesses, we do what is currently done in making config reads
> till it succeeds and then do the config write as specified by the errata.
> However, to avoid hitting the errata issue when doing config reads, we
> disable ACS SV around this process.
>
> The patch does the following -
>
> 1. Disable ACS source violation if enabled.
> 2. Wait for config space access to become available by reading vendor id
> 3. Do a config write to the end point (errata workaround)
> 4. Enable ACS source validation (if it was enabled to begin with)
>
> Signed-off-by: James Puthukattukaran <james.puthukattukaran@xxxxxxxxxx>
> ---
> drivers/pci/pci.h | 2 ++
> drivers/pci/quirks.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 99 insertions(+)
>
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 39ea6ee..d0d588d 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -227,6 +227,8 @@ bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *pl,
> int crs_timeout);
> int pci_bus_specific_read_dev_vendor_id(struct pci_bus *bus, int devfn,
> u32 *pl, int crs_timeout);
> +bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn,
> + u32 *pl, int crs_timeout);
> int pci_setup_device(struct pci_dev *dev);
> int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
> struct resource *res, unsigned int reg);
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index c32c5ec..89cd47d 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -4742,12 +4742,109 @@ static void quirk_gpu_hda(struct pci_dev *hda)
> DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
> PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda);
>
> +/*
> + * The IDT switch incorrectly flags an ACS source violation on a read config
> + * request to an end point device on the completion (IDT 89H32H8G3-YC,
> + * errata #36) even though the PCI Express spec states that completions are
> + * never affected by ACS source violation (PCI Spec 3.1, Section 6.12.1.1).
> + * Here's * the specific copy of the errata text --
> + *
> + * "Item #36 - Downstream port applies ACS Source Validation to Completions
> + * Section 6.12.1.1 of the PCI Express Base Specification 3.1 states
> + * that completions are never affected
> + * by ACS Source Validation. However, completions received by a
> + * downstream port of the PCIe switch from a device that has not yet
> + * captured a PCIe bus number are incorrectly dropped by ACS source
> + * validation by the switch downstream port."
> + *
> + * The suggested workaround by IDT is to issue a configuration write to the
> + * downstream device before issuing the first config read. This allows the
> + * downstream device to capture its bus number, thus avoiding the ACS
> + * violation on the completion. In order to make sure that the device is ready
> + * for config accesses, we do what is currently done in making config reads
> + * till it succeeds and then do the config write as specified by the errata.
> + * However, to avoid hitting the errata issue when doing config reads, we
> + * disable ACS SV around this process.
> + */
> +static int pci_idt_acs_quirk(struct pci_bus *bus, int devfn, int enable,
> + bool found)
> +{
> + int pos;
> + u16 cap;
> + u16 ctrl;
> + int retval;
> + struct pci_dev *dev = bus->self;
> +
> +
> + /* Write 0 to the devfn device under the PCIE switch (bus->self)
> + * as part of forcing the devfn number to latch with the device
> + * below
> + */
> + if (found)
> + pci_bus_write_config_word(bus, devfn, PCI_VENDOR_ID, 0);
> +
> +
> + /* Enable/disable ACS SV feature (based on enable flag) */
> + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
> + if (!pos)
> + return -ENODEV;
> +
> + pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap);
> +
> + if (!(cap & PCI_ACS_SV))
> + return -ENODEV;
> +
> + pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
> +
> + retval = !!(ctrl & cap & PCI_ACS_SV);
> + if (enable)
> + ctrl |= (cap & PCI_ACS_SV);
> + else
> + ctrl &= ~(cap & PCI_ACS_SV);
> +
> + pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
> +
> + /* return the previous state of the ACS SV state i.e was SV enabled
> + * or disabled?
> + */
> + return retval;
> +}
> +
> +static int pci_idt_bus_quirk(struct pci_bus *bus, int devfn, u32 *l,
> + int timeout)
> +{
> + int enable;
> + bool found;
> +
> + /*
> + * Disable acs for the IDT switch before attempting the initial
> + * config accesses to the endpoint device.
> + */
> + enable = pci_idt_acs_quirk(bus, devfn, 0, false);
> +
> + /*
> + * found indicates whether the endpoint device was identified
> + * as present or not
> + */
> +
> + found = pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout);
> +
> + /*
> + * re-enable acs feature for the switch again if it was enabled to
> + * start with
> + */
Inconsistent comment style even within the same patch. Otherwise,
Reviewed-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
> + if (enable > 0)
> + pci_idt_acs_quirk(bus, devfn, enable, found);
> +
> + return found ? 1 : 0;
> +}
>
> static const struct pci_bus_specific_quirk{
> u16 vendor;
> u16 device;
> int (*bus_quirk)(struct pci_bus *bus, int devfn, u32 *l, int timeout);
> } pci_bus_specific_quirks[] = {
> + { PCI_VENDOR_ID_IDT, 0x80b5, pci_idt_bus_quirk},
> {0}
> };
>
