>-----Original Message----- >From: linux-rdma-owner@xxxxxxxxxxxxxxx [mailto:linux-rdma- >owner@xxxxxxxxxxxxxxx] On Behalf Of Frederick Lawler >Sent: Monday, April 16, 2018 8:28 PM >To: bhelgaas@xxxxxxxxxx; Marciniszyn, Mike <mike.marciniszyn@xxxxxxxxx>; >Dalessandro, Dennis <dennis.dalessandro@xxxxxxxxx>; >dledford@xxxxxxxxxx; jgg@xxxxxxxxxxxx >Cc: linux-pci@xxxxxxxxxxxxxxx; linux-rdma@xxxxxxxxxxxxxxx; Frederick Lawler ><fred@xxxxxxxxxxxx> >Subject: [PATCH v3 2/2] IB/hfi1: Replace custom hfi1 macros with PCIe macros > >IB/hfi1 contains custom macros for PCIe link configuration. Remove the >custom macros in favor of the PCIe link macros. No functional change >intended. > >Signed-off-by: Frederick Lawler <fred@xxxxxxxxxxxx> This looks good. Thanks! Reviewed-by: Michael J. Ruhl <michael.j.ruhl@xxxxxxxxx> >-- >V3: Use PCI_EXP_LNKCTL2_TLS* macros >V2: s/LINK/LNK >--- > drivers/infiniband/hw/hfi1/pcie.c | 24 ++++++++---------------- > 1 file changed, 8 insertions(+), 16 deletions(-) > >diff --git a/drivers/infiniband/hw/hfi1/pcie.c >b/drivers/infiniband/hw/hfi1/pcie.c >index 83d66e862207..fe2a6d602856 100644 >--- a/drivers/infiniband/hw/hfi1/pcie.c >+++ b/drivers/infiniband/hw/hfi1/pcie.c >@@ -56,11 +56,6 @@ > #include "chip_registers.h" > #include "aspm.h" > >-/* link speed vector for Gen3 speed - not in Linux headers */ >-#define GEN1_SPEED_VECTOR 0x1 >-#define GEN2_SPEED_VECTOR 0x2 >-#define GEN3_SPEED_VECTOR 0x3 >- > /* > * This file contains PCIe utility routines. > */ >@@ -265,7 +260,7 @@ static u32 extract_speed(u16 linkstat) > case PCI_EXP_LNKSTA_CLS_5_0GB: > speed = 5000; /* Gen 2, 5GHz */ > break; >- case GEN3_SPEED_VECTOR: >+ case PCI_EXP_LNKSTA_CLS_8_0GB: > speed = 8000; /* Gen 3, 8GHz */ > break; > } >@@ -320,7 +315,7 @@ int pcie_speeds(struct hfi1_devdata *dd) > return ret; > } > >- if ((linkcap & PCI_EXP_LNKCAP_SLS) != GEN3_SPEED_VECTOR) { >+ if ((linkcap & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_8_0GB) >{ > dd_dev_info(dd, > "This HFI is not Gen3 capable, max speed 0x%x, >need 0x3\n", > linkcap & PCI_EXP_LNKCAP_SLS); >@@ -697,9 +692,6 @@ const struct pci_error_handlers hfi1_pci_err_handler = >{ > /* gasket block secondary bus reset delay */ > #define SBR_DELAY_US 200000 /* 200ms */ > >-/* mask for PCIe capability register lnkctl2 target link speed */ >-#define LNKCTL2_TARGET_LINK_SPEED_MASK 0xf >- > static uint pcie_target = 3; > module_param(pcie_target, uint, S_IRUGO); > MODULE_PARM_DESC(pcie_target, "PCIe target speed (0 skip, 1-3 Gen1-3)"); >@@ -1048,13 +1040,13 @@ int do_pcie_gen3_transition(struct hfi1_devdata >*dd) > return 0; > > if (pcie_target == 1) { /* target Gen1 */ >- target_vector = GEN1_SPEED_VECTOR; >+ target_vector = PCI_EXP_LNKCTL2_TLS_2_5GB; > target_speed = 2500; > } else if (pcie_target == 2) { /* target Gen2 */ >- target_vector = GEN2_SPEED_VECTOR; >+ target_vector = PCI_EXP_LNKCTL2_TLS_5_0GB; > target_speed = 5000; > } else if (pcie_target == 3) { /* target Gen3 */ >- target_vector = GEN3_SPEED_VECTOR; >+ target_vector = PCI_EXP_LNKCTL2_TLS_8_0GB; > target_speed = 8000; > } else { > /* off or invalid target - skip */ >@@ -1293,8 +1285,8 @@ int do_pcie_gen3_transition(struct hfi1_devdata >*dd) > dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__, > (u32)lnkctl2); > /* only write to parent if target is not as high as ours */ >- if ((lnkctl2 & LNKCTL2_TARGET_LINK_SPEED_MASK) < target_vector) { >- lnkctl2 &= ~LNKCTL2_TARGET_LINK_SPEED_MASK; >+ if ((lnkctl2 & PCI_EXP_LNKCTL2_TLS) < target_vector) { >+ lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS; > lnkctl2 |= target_vector; > dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__, > (u32)lnkctl2); >@@ -1319,7 +1311,7 @@ int do_pcie_gen3_transition(struct hfi1_devdata >*dd) > > dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__, > (u32)lnkctl2); >- lnkctl2 &= ~LNKCTL2_TARGET_LINK_SPEED_MASK; >+ lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS; > lnkctl2 |= target_vector; > dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__, > (u32)lnkctl2); >-- >2.17.0 > >-- >To unsubscribe from this list: send the line "unsubscribe linux-rdma" in >the body of a message to majordomo@xxxxxxxxxxxxxxx >More majordomo info at http://vger.kernel.org/majordomo-info.html
