Re: [PATCH v2 3/3] PCI: dra7xx: Enable x2 mode support for dra74x, dra76x and dra72x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 19, 2017 at 02:28:23PM +0530, Kishon Vijay Abraham I wrote:
> dra74x/dra76x and dra72x has separate compatible strings. Add support

s/has/have

> for these compatible strings in pci-dra7xx driver to perform syscon
> configurations required to get x2 mode working.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
>  drivers/pci/dwc/pci-dra7xx.c | 90 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 90 insertions(+)
> 
> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
> index e77a4ceed74c..3b4427c10228 100644
> --- a/drivers/pci/dwc/pci-dra7xx.c
> +++ b/drivers/pci/dwc/pci-dra7xx.c
> @@ -83,11 +83,15 @@
>  #define MSI_REQ_GRANT					BIT(0)
>  #define MSI_VECTOR_SHIFT				7
>  
> +#define PCIE_1LANE_2LANE_SELECTION			BIT(13)
> +#define PCIE_B1C0_MODE_SEL				BIT(2)
> +
>  struct dra7xx_pcie {
>  	struct dw_pcie		*pci;
>  	void __iomem		*base;		/* DT ti_conf */
>  	int			phy_count;	/* DT phy-names count */
>  	struct phy		**phy;
> +	u32			*b1c0_mask;

This looks unused in the current patch.

>  	int			link_gen;
>  	struct irq_domain	*irq_domain;
>  	enum dw_pcie_device_mode mode;
> @@ -95,6 +99,7 @@ struct dra7xx_pcie {
>  
>  struct dra7xx_pcie_of_data {
>  	enum dw_pcie_device_mode mode;
> +	u32 b1co_mode_sel_mask;
>  };
>  
>  #define to_dra7xx_pcie(x)	dev_get_drvdata((x)->dev)
> @@ -533,6 +538,26 @@ static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = {
>  	.mode = DW_PCIE_EP_TYPE,
>  };
>  
> +static const struct dra7xx_pcie_of_data dra746_pcie_rc_of_data = {
> +	.b1co_mode_sel_mask = BIT(2),

Nit: DT guys are more familiar than me on how this data should be
encoded but maybe bit offset + length can be better ? I do not know, I
have no problem leaving them as masks.

> +	.mode = DW_PCIE_RC_TYPE,
> +};
> +
> +static const struct dra7xx_pcie_of_data dra726_pcie_rc_of_data = {
> +	.b1co_mode_sel_mask = GENMASK(3, 2),
> +	.mode = DW_PCIE_RC_TYPE,
> +};
> +
> +static const struct dra7xx_pcie_of_data dra746_pcie_ep_of_data = {
> +	.b1co_mode_sel_mask = BIT(2),
> +	.mode = DW_PCIE_EP_TYPE,
> +};
> +
> +static const struct dra7xx_pcie_of_data dra726_pcie_ep_of_data = {
> +	.b1co_mode_sel_mask = GENMASK(3, 2),
> +	.mode = DW_PCIE_EP_TYPE,
> +};
> +
>  static const struct of_device_id of_dra7xx_pcie_match[] = {
>  	{
>  		.compatible = "ti,dra7-pcie",
> @@ -542,6 +567,22 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
>  		.compatible = "ti,dra7-pcie-ep",
>  		.data = &dra7xx_pcie_ep_of_data,
>  	},
> +	{
> +		.compatible = "ti,dra746-pcie-rc",
> +		.data = &dra746_pcie_rc_of_data,
> +	},
> +	{
> +		.compatible = "ti,dra726-pcie-rc",
> +		.data = &dra726_pcie_rc_of_data,
> +	},
> +	{
> +		.compatible = "ti,dra746-pcie-ep",
> +		.data = &dra746_pcie_ep_of_data,
> +	},
> +	{
> +		.compatible = "ti,dra726-pcie-ep",
> +		.data = &dra726_pcie_ep_of_data,
> +	},
>  	{},
>  };
>  
> @@ -587,6 +628,47 @@ static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
>  	return ret;
>  }
>  
> +static int dra7xx_pcie_configure_two_lane(struct device *dev,
> +					  u32 b1co_mode_sel_mask)
> +{
> +	struct device_node *np = dev->of_node;
> +	struct regmap *pcie_syscon;
> +	unsigned int pcie_reg;
> +
> +	pcie_syscon = syscon_regmap_lookup_by_phandle(np,
> +						      "ti,syscon-lane-conf");
> +	if (IS_ERR(pcie_syscon)) {
> +		dev_err(dev, "unable to get ti,syscon-lane-conf\n");
> +		return -EINVAL;
> +	}
> +
> +	if (of_property_read_u32_index(np, "ti,syscon-lane-conf", 1,
> +				       &pcie_reg)) {
> +		dev_err(dev, "couldn't get lane configuration reg offset\n");
> +		return -EINVAL;
> +	}
> +
> +	regmap_update_bits(pcie_syscon, pcie_reg, PCIE_1LANE_2LANE_SELECTION,
> +			   PCIE_1LANE_2LANE_SELECTION);

I do not know if this can create issues but the regmap should clear
those bits in the error path ?

> +
> +	pcie_syscon = syscon_regmap_lookup_by_phandle(np, "ti,syscon-lane-sel");
> +	if (IS_ERR(pcie_syscon)) {
> +		dev_err(dev, "unable to get ti,syscon-lane-sel\n");
> +		return -EINVAL;
> +	}
> +
> +	if (of_property_read_u32_index(np, "ti,syscon-lane-sel", 1,
> +				       &pcie_reg)) {
> +		dev_err(dev, "couldn't get lane selection reg offset\n");
> +		return -EINVAL;
> +	}
> +
> +	regmap_update_bits(pcie_syscon, pcie_reg, b1co_mode_sel_mask,
> +			   PCIE_B1C0_MODE_SEL);
> +
> +	return 0;
> +}
> +
>  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>  {
>  	u32 reg;
> @@ -608,6 +690,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>  	const struct of_device_id *match;
>  	const struct dra7xx_pcie_of_data *data;
>  	enum dw_pcie_device_mode mode;
> +	u32 b1co_mode_sel_mask;

Again, do you need this temporary variable (given that you pass the
value below) ?

Thanks,
Lorenzo

>  	match = of_match_device(of_match_ptr(of_dra7xx_pcie_match), dev);
>  	if (!match)
> @@ -615,6 +698,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>  
>  	data = (struct dra7xx_pcie_of_data *)match->data;
>  	mode = (enum dw_pcie_device_mode)data->mode;
> +	b1co_mode_sel_mask = data->b1co_mode_sel_mask;
>  
>  	dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL);
>  	if (!dra7xx)
> @@ -673,6 +757,12 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>  	dra7xx->pci = pci;
>  	dra7xx->phy_count = phy_count;
>  
> +	if (phy_count == 2) {
> +		ret = dra7xx_pcie_configure_two_lane(dev, b1co_mode_sel_mask);
> +		if (ret < 0)
> +			goto err_link;
> +	}
> +
>  	ret = dra7xx_pcie_enable_phy(dra7xx);
>  	if (ret) {
>  		dev_err(dev, "failed to enable phy\n");
> -- 
> 2.11.0
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux