On Mon, Feb 12, 2018 at 12:51 AM, Rafael J. Wysocki <rafael@xxxxxxxxxx> wrote:
> On Sat, Feb 10, 2018 at 4:34 PM, Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>> On Sat, Feb 10, 2018 at 09:08:42AM +0100, Rafael J. Wysocki wrote:
>>> On Sat, Feb 10, 2018 at 2:05 AM, Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>>> > On Fri, Feb 09, 2018 at 02:56:43PM -0800, Alex Hung wrote:
>>> >> In recent Intel hardware the IRQs become non-configurable after BIOS
>>> >> initializes them in PEI phase and _PRS objects are no longer included in
>>> >> ASL.
>>> >>
>>> >> This is the same as "static (non-configurable) devices do not
>>> >> specify a _PRS object" in ACPI spec. As a result, error messages
>>> >> saying "ACPI Exception: AE_NOT_FOUND, Evaluating _PRS" does not need to
>>> >> be in kernel messages all the time but only when debug is enabled.
>>> >
>>> > I agree and would even go further: _PRS is optional and I don't think
>>> > there's a reason to log anything at all if it's absent. A log message
>>> > like "failed to evaluate _PRS" makes people think something is wrong
>>> > when in fact nothing is wrong.
>>>
>>> _PRS is required if the link object is pointed to by a _PRT entry.
>>
>> The closest thing I see with a quick look is ACPI 6.0, sec 6.2.13:
>>
>> These objects [PCI Interrupt Link Devices] have _PRS, _CRS, _SRS,
>> and _DIS control methods to allocate the interrupt.
>>
>> I don't read that as a requirement for _PRS in particular; I read it
>> as saying that the interrupt link devices use the normal device
>> configuration method, i.e., _CRS is required and _PRS and _SRS are
>> optional and needed for configurable devices but not for static ones.
>
> Well, that's slightly out of context. :-)
>
> First of all, Section 6.2.13 says this: "Typically, the interrupt
> input that a given PCI interrupt is on is configurable. [...] In this
> model, each interrupt is represented in the ACPI namespace as a PCI
> Interrupt Link Device." Then, it says the above.
>
> Now, if _PRS is not present, the IRQ represented by the link object
> cannot be configured, so in fact the underlying assumption doesn't
> apply to it, strictly speaking. It follows from the last paragraph in
> Section 6.2.13 that _PRT entries representing such IRQs should not
> point to interrupt link device objects (there should be 0 in their
> Source fields).
>
> Hence, if a _PRT entry points to an interrupt link device object in
> the namespace, _PRS should be present under this object or at least it
> is reasonable to expect that it will be present in there.
>
>> But this is just a drive-by comment and I'm really fine with whatever
>> you decide to do.
>
> OK
>
> So I think that (a) the message should be printed using
> acpi_handle_debug(), except that I would make it slightly more
> neutral, something like "_PRS not present or invalid", and (b) 0
> should be returned instead of -ENODEV when _PRS evaluation doesn't
> succeed.
Looks like we will do the following.
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRS"));
- return -ENODEV;
+ acpi_handle_debug(link->device->handle, "_PRS not
present or invalid");
+ return 0;
I will revise the patch and send it if this is all agreed.
