On Thu, Feb 08, 2018 at 06:17:32PM +0530, Kishon Vijay Abraham I wrote: > Hi, > > On Thursday 08 February 2018 06:03 PM, Niklas Cassel wrote: > > A 64-bit BAR uses the succeeding BAR for the upper bits, therefore > > we cannot call pci_epc_set_bar() on a BAR that follows a 64-bit BAR. > > > > If pci_epc_set_bar() is called with flag PCI_BASE_ADDRESS_MEM_TYPE_64, > > Not related to $patch. But I have a query on when PCI_BASE_ADDRESS_MEM_TYPE_64 > should be set. Whether if the size is > 4G or if the address can be mapped > anywhere in the 64-bit PCIe address space or both? Hello Kishon, Since 32-bit BARs work fine on 64-bit CPUs, and since 64-bit BARs work fine on 32 bit CPUs (as long as we assign them an address <4G, and their (combined) size is not too big), perhaps the best way would be if pci-epf-test always defaults to 32-bit BARs, and a module parameter says if we should test 64-bit BARs. Just because a 64-bit BAR can be assigned an address >4G, and have a size >4G, doesn't mean that we have to give it those properties. This way we can have some testing of 64-bit BARs on 32-bit CPUs, even though more extensive testing (e.g. having a BAR with a size >4G) would require a 64-bit CPU. Regards, Niklas > > Thanks > Kishon > > it has to be up to the controller driver to write both BAR[x] and BAR[x+1] > > (and BAR_mask[x] and BAR_mask[x+1]). > > > > Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx> > > --- > > drivers/pci/endpoint/functions/pci-epf-test.c | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c > > index 800da09d9005..eef85820f59e 100644 > > --- a/drivers/pci/endpoint/functions/pci-epf-test.c > > +++ b/drivers/pci/endpoint/functions/pci-epf-test.c > > @@ -382,6 +382,8 @@ static int pci_epf_test_set_bar(struct pci_epf *epf) > > if (bar == test_reg_bar) > > return ret; > > } > > + if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64) > > + bar++; > > } > > > > return 0; > >
