On Tue, 2018-02-06 at 08:36 +1100, Benjamin Herrenschmidt wrote:
> On Fri, 2018-02-02 at 17:32 +0800, Ryder Lee wrote:
> > On Wed, 2018-01-31 at 10:02 -0600, Rob Herring wrote:
> > > On Wed, Jan 31, 2018 at 1:41 AM, Ryder Lee <ryder.lee@xxxxxxxxxxxx> wrote:
> > > > A root complex usually consist of a host bridge and multiple P2P bridges,
> > > > and someone may express that in the form of a root node with many subnodes
> > > > and list all four interrupts for each slot (child node) in the root node
> > > > like this:
> > > >
> > > > pcie-controller {
> > > > ...
> > > > interrupt-map-mask = <0xf800 0 0 7>;
> > > > interrupt-map = <0x0000 0 0 {INTx} &{interrupt parent} ...>
> > > > 0x0800 0 0 {INTx} &{interrupt parent} ...>;
> > > >
> > > > pcie@0,0 {
> > > > reg = <0x0000 0 0 0 0>;
> > > > ...
> > > > };
> > > >
> > > > pcie@1,0 {
> > > > reg = <0x0800 0 0 0 0>;
> > > > ...
> > > > };
> > > > };
> > > >
> > > > As shown above, we'd like to propagate IRQs from a root port to the devices
> > > > in the hierarchy below it in this way. However, it seems that the current
> > > > parser couldn't handle such cases and will get something unexpected below:
> > > >
> > > > pcieport 0000:00:01.0: assign IRQ: got 213
> > > > igb 0000:01:00.0: assign IRQ: got 212
> > > >
> > > > There is a device which is connected to 2nd slot, but the port doesn't share
> > > > the same IRQ with its downstream devices. The problem here is that, if the
> > > > loop found a P2P bridge, it wouldn't check whether the reg property exists
> > > > in ppnode or not but just pass the subordinate devfn to of_irq_parse_raw(),
> > > > thus the subsequent flow couldn't correctly resolve them.
>
> I don't really understand the problem explanation here. Something
> doesn't look right as you shouldn't have to change that function, but I
> just don't get what you a
>
> Cheers,
> Ben.
>
I think the code should look at the bridge address <0x0800 ...> we list
in bindings for resolving interrupts in this case, but it seems like it
use the 'pdev->defvn << 8' which is not really we want and will lead to
mismatch.
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0x0000 0 0 1 ...>,
<0x0000 0 0 2 ...>,
<0x0000 0 0 3 ...>,
<0x0000 0 0 4 ...>,
0x0800 0 0 1 ...>,
0x0800 0 0 2 ...>,
0x0800 0 0 3 ...>,
0x0800 0 0 4 ...>;
...
pcie@1,0 {
reg = <0x0800 0 0 0 0>;
...
};
Or, alternatively, we could add a interrupt-map property in both child
and root node to solve this. The below example is my original version as
I don't want to change that function either.
interrupt-map-mask = <0xf800 0 0 0>;
interrupt-map = <0x0000 0 0 0 ...>,
0x0800 0 0 0 ...>;
...
pcie@1,0 {
reg = <0x0800 0 0 0 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 ...>;
...
};
However, I can't find any other similar case in documentation.
Thanks.
