On 2018-01-19 19:49, Stefan Roese wrote:
On 19.01.2018 12:10, Oza Pawandeep wrote:
Clients such as pciehp, dpc are using pcie_wait_link_active, which
waits
till the link becomes active or inactive.
Made generic function and moved it to drivers/pci/pci.c
Signed-off-by: Oza Pawandeep <poza@xxxxxxxxxxxxxx>
diff --git a/drivers/pci/hotplug/pciehp_hpc.c
b/drivers/pci/hotplug/pciehp_hpc.c
index 7bab060..26afeff 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -245,25 +245,12 @@ bool pciehp_check_link_active(struct controller
*ctrl)
return ret;
}
-static void __pcie_wait_link_active(struct controller *ctrl, bool
active)
+static bool pcie_wait_link_active(struct controller *ctrl)
{
- int timeout = 1000;
-
- if (pciehp_check_link_active(ctrl) == active)
- return;
- while (timeout > 0) {
- msleep(10);
- timeout -= 10;
- if (pciehp_check_link_active(ctrl) == active)
- return;
- }
- ctrl_dbg(ctrl, "Data Link Layer Link Active not %s in 1000 msec\n",
- active ? "set" : "cleared");
-}
+ struct pci_dev *pdev = ctrl_dev(ctrl);
+ bool active = true;
-static void pcie_wait_link_active(struct controller *ctrl)
-{
- __pcie_wait_link_active(ctrl, true);
+ return pci_wait_for_link(pdev, active);
}
static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 4a7c686..0de83ea 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2805,7 +2805,7 @@ static void pci_std_enable_acs(struct pci_dev
*dev)
pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
/* Source Validation */
- ctrl |= (cap & PCI_ACS_SV);
+// ctrl |= (cap & PCI_ACS_SV);
Could it be, that you missed to fix / clean something up here?
Thanks,
Stefan
yes, will correct this and re-post.
Regards,
Oza.