Primary, secondary and subordinate default bus numbers are 0 in Tegra and it is expecting SW to program these numbers in configration space. pci_scan_bridge_extend() function programs these numbers in configuration space if secondary & subordinate bus numbers are 0 or PCI_REASSIGN_ALL_BUS flag is set. Since secondary & subordinate default bus numbers are 0, PCI_REASSIGN_ALL_BUS flag can be removed for Tegra PCIe. Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx> Acked-by: Thierry Reding <treding@xxxxxxxxxx> --- V3: * new patch in V3 V4: * no change in this patch V5: * no change in this patch V6: * Rebased on lpieralisi/pci/tegra branch drivers/pci/host/pci-tegra.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c index 059aa73d5f76..e4b47ebc91fe 100644 --- a/drivers/pci/host/pci-tegra.c +++ b/drivers/pci/host/pci-tegra.c @@ -2293,7 +2293,6 @@ static int tegra_pcie_probe(struct platform_device *pdev) tegra_pcie_enable_ports(pcie); - pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS); host->busnr = pcie->busn.start; host->dev.parent = &pdev->dev; host->ops = &tegra_pcie_ops; -- 2.1.4
