Re: [RFC] PCI: Cleanup drivers/pci/Makefile

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 03, 2018 at 10:15:40PM +0100, Cyrille Pitchen wrote:
> Remove empty lines, useless comments and sort rules by alphabetical
> order.
> 
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxxxxxxxxxx>
> ---
> Hi Bjorn,
> 
> This is the kernel oops I get when I test this patch.
> I've applied it on top of the series for the Cadence PCIe controller.
> I didn't have time to investigate more yet, sorry!
> 
> kernel BUG at drivers/base/driver.c:153!
> Internal error: Oops - BUG: 0 [#1] PREEMPT SMP                  
> Modules linked in:                                              
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc4+ #151      
> Hardware name: Cadence CSP (DT)                                 
> pstate: 40000005 (nZcv daif -PAN -UAO)
> pc : driver_register+0xc0/0xf8
> lr : pcie_port_service_register+0x4c/0x60
> sp : ffffffc006457d90
> x29: ffffffc006457d90 x28: 0000000000000000
> x27: ffffff80086e2028 x26: ffffff800884a000
> x25: ffffff8008690474 x24: ffffff80086d7068
> x23: ffffff800868b0b8 x22: ffffff80086d7078
> x21: 0000000000000000 x20: ffffff80088692d4
> x19: ffffff80086af380 x18: 0000000000000000
> x17: 000000000000037f x16: 0000000000000000
> x15: 0000000000000000 x14: 0000000000000400
> x13: 0000000000000001 x12: 0000000000000000
> x11: 0000000000000001 x10: 0000000000000980
> x9 : ffffffc006457b60 x8 : ffffffc0064589e0
> x7 : ffffffc006458100 x6 : 000000000000a6e8
> x5 : 000000000000a6e8 x4 : 0000000000000000
> x1 : ffffff800881d720 x0 : ffffff800881c820
> Process swapper/0 (pid: 1, stack limit = 0x00000000d680c8f0)
> Call trace:
>  driver_register+0xc0/0xf8
>  pcied_init+0x24/0x7c
>  do_one_initcall+0x38/0x120
>  kernel_init_freeable+0x134/0x1d0
>  kernel_init+0x10/0x100
>  ret_from_fork+0x10/0x18
> Code: 2a1403e0 a94153f3 a8c27bfd d65f03c0 (d4210000)

Thanks, I think this happens because we have

  device_initcall(pcied_init);
  device_initcall(pcie_portdrv_init);

and pcied_init() depends on something done by pcie_portdrv_init().  I
think this is a mess but it's a lot of work to clean up.  So I guess
we'll just rely on the link ordering for now.

>  drivers/pci/Makefile | 84 +++++++++++++++++++++-------------------------------
>  1 file changed, 33 insertions(+), 51 deletions(-)
> 
> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> index 3b6c22afb2aa..fd4401cf1b4a 100644
> --- a/drivers/pci/Makefile
> +++ b/drivers/pci/Makefile
> @@ -3,57 +3,39 @@
>  # Makefile for the PCI bus specific drivers.
>  #
>  
> -obj-$(CONFIG_PCI)	+= access.o bus.o probe.o host-bridge.o remove.o pci.o \
> -			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
> -			irq.o vpd.o setup-bus.o vc.o mmap.o setup-irq.o
> +ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
>  
> +# PCI core
> +obj-$(CONFIG_ACPI)			+= pci-acpi.o
> +obj-$(CONFIG_HOTPLUG_PCI)		+= hotplug/
> +obj-$(CONFIG_PCI)			+= access.o bus.o probe.o host-bridge.o \
> +					   remove.o pci.o pci-driver.o search.o \
> +					   pci-sysfs.o rom.o setup-res.o irq.o \
> +					   vpd.o setup-bus.o vc.o mmap.o \
> +					   setup-irq.o
>  ifdef CONFIG_PCI
> -obj-$(CONFIG_PROC_FS) += proc.o
> -obj-$(CONFIG_SYSFS) += slot.o
> -obj-$(CONFIG_OF) += of.o
> +obj-$(CONFIG_OF)			+= of.o
> +obj-$(CONFIG_PROC_FS)			+= proc.o
> +obj-$(CONFIG_SYSFS)			+= slot.o
>  endif
> -
> -obj-$(CONFIG_PCI_QUIRKS) += quirks.o
> -
> -# Build PCI Express stuff if needed
> -obj-$(CONFIG_PCIEPORTBUS) += pcie/
> -
> -# Build the PCI Hotplug drivers if we were asked to
> -obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
> -
> -# Build the PCI MSI interrupt support
> -obj-$(CONFIG_PCI_MSI) += msi.o
> -
> -obj-$(CONFIG_PCI_ATS) += ats.o
> -obj-$(CONFIG_PCI_IOV) += iov.o
> -
> -#
> -# ACPI Related PCI FW Functions
> -# ACPI _DSM provided firmware instance and string name
> -#
> -obj-$(CONFIG_ACPI)    += pci-acpi.o
> -
> -# SMBIOS provided firmware instance and labels
> -obj-$(CONFIG_PCI_LABEL) += pci-label.o
> -
> -# Intel MID platform PM support
> -obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o
> -
> -obj-$(CONFIG_PCI_SYSCALL) += syscall.o
> -
> -obj-$(CONFIG_PCI_STUB) += pci-stub.o
> -
> -obj-$(CONFIG_PCI_ECAM) += ecam.o
> -
> -obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
> -
> -ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
> -
> -# PCI host controller drivers
> -obj-y += host/
> -obj-y += switch/
> -
> -obj-$(CONFIG_PCI_ENDPOINT)	+= endpoint/
> -obj-$(CONFIG_PCIE_CADENCE)	+= cadence/
> -# PCI dwc controller drivers
> -obj-y				+= dwc/
> +obj-$(CONFIG_PCIEPORTBUS)		+= pcie/
> +obj-$(CONFIG_PCI_ATS)			+= ats.o
> +obj-$(CONFIG_PCI_ECAM)			+= ecam.o
> +obj-$(CONFIG_PCI_IOV)			+= iov.o
> +obj-$(CONFIG_PCI_LABEL)			+= pci-label.o
> +obj-$(CONFIG_PCI_MSI)			+= msi.o
> +obj-$(CONFIG_PCI_QUIRKS)		+= quirks.o
> +obj-$(CONFIG_PCI_STUB)			+= pci-stub.o
> +obj-$(CONFIG_PCI_SYSCALL)		+= syscall.o
> +obj-$(CONFIG_X86_INTEL_MID)		+= pci-mid.o
> +obj-$(CONFIG_XEN_PCIDEV_FRONTEND)	+= xen-pcifront.o
> +
> +# PCI controllers
> +obj-y					+= host/
> +obj-y					+= switch/
> +obj-$(CONFIG_PCI_ENDPOINT)		+= endpoint/
> +
> +# PCI controllers supporting both host and endpoint modes:
> +# their associated drivers must currently be linked after the EPC/EPF libraries
> +obj-$(CONFIG_PCIE_CADENCE)		+= cadence/
> +obj-y					+= dwc/
> -- 
> 2.11.0
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux