To correctly use EEH code one has to make
sure that the EEH_PE_VF is set for dynamic created
VFs. Therefore this patch allocates an eeh_pe of
eeh type EEH_PE_VF and associates PE with parent.
Signed-off-by: Bryant G. Ly <bryantly@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Juan J. Alvarez <jjalvare@xxxxxxxxxxxxxxxxxx>
---
arch/powerpc/include/asm/pci-bridge.h | 5 ++++-
arch/powerpc/platforms/pseries/eeh_pseries.c | 14 +++++++++++++-
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 9f66ddebb799..16d70740a76f 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -211,7 +211,10 @@ struct pci_dn {
unsigned int *pe_num_map; /* PE# for the first VF PE or array */
bool m64_single_mode; /* Use M64 BAR in Single Mode */
#define IODA_INVALID_M64 (-1)
- int (*m64_map)[PCI_SRIOV_NUM_BARS];
+ union {
+ int (*m64_map)[PCI_SRIOV_NUM_BARS]; /*Only used in powernv */
+ int last_allow_rc; /* Only used in pSeries */
+ };
#endif /* CONFIG_PCI_IOV */
int mps; /* Maximum Payload Size */
struct list_head child_list;
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index a671ef4f57f5..686e9c7feab5 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -58,6 +58,8 @@ static int ibm_configure_pe;
void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
{
struct pci_dn *pdn = pci_get_pdn(pdev);
+ struct pci_dn *physfn_pdn;
+ struct eeh_dev *edev;
if (!pdev->is_virtfn)
return;
@@ -65,6 +67,14 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
pdn->device_id = pdev->device;
pdn->vendor_id = pdev->vendor;
pdn->class_code = pdev->class;
+ /* Last allow unfreeze return code used for retrieval
+ * by user space in eeh-sysfs to show the last command
+ * completion from platform
+ */
+ pdn->last_allow_rc = 0;
+ physfn_pdn = pci_get_pdn(pdev->physfn);
+ pdn->pe_number = physfn_pdn->pe_num_map[pdn->vf_index];
+ edev = pdn_to_eeh_dev(pdn);
/*
* The following operations will fail if VF's sysfs files
@@ -72,8 +82,10 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
*/
eeh_add_device_early(pdn);
eeh_add_device_late(pdev);
+ edev->pe_config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
+ eeh_rmv_from_parent_pe(edev); /* Remove as it is adding to bus pe */
+ eeh_add_to_parent_pe(edev); /* Add as VF PE type */
eeh_sysfs_add_device(pdev);
-
}
/*
--
2.14.3 (Apple Git-98)
