Re: pci driver loads right after unload

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg/Bjorn,

On 1/2/2018 9:27 PM, Greg Kroah-Hartman wrote:
On Tue, Jan 02, 2018 at 01:00:03PM -0600, Bjorn Helgaas wrote:
[+cc Greg, linux-kernel]

Hi Max,

Thanks for the report!

On Tue, Jan 02, 2018 at 01:50:23AM +0200, Max Gurtovoy wrote:
hi all,
I encountered a strange phenomena using 2 different pci drivers
(nvme and mlx5_core) since 4.15-rc1:
when I try to unload the modules using "modprobe -r" cmd it calls
the .probe function right after calling the .remove function and the
module is not realy unloaded.
I think there is some race condition because when I added a
msleep(1000) after "pci_unregister_driver(&nvme_driver);" (in the
nvme module testing, it also worked in the mlx5_core), the issue
seems to dissapear.

You say "since 4.15-rc1".  Does that mean it's a regression?  If so,
what's the most recent kernel that does not have this problem?  Worst
case, you could bisect to find where it broke.

I don't see anything obvious in the drivers/pci changes between v4.14
and v4.15-rc1.  Module loading and driver binding is mostly driven by
the driver core and udev.  Maybe you could learn something with
"udevadm monitor" or by turning on the some of the debug in
lib/kobject_uevent.c?


This should be resolved in 4.15-rc6, there was a regression in -rc1 in
this area when dealing with uevents over netlink.

Max, can you test -rc6 to verify if this is really fixed or not?

I've tested -rc6 and the issue doesn't repro.
I'll continue monitoring this scenario in -rc7.
Can you point to the commit that fixes the issue ? and I'll test the kernel with/without this patch.


thanks,

greg k-h


Cheers,
Max.



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux