Re: [PATCH] lspci: Decode "VGA 16-bit decode" in bridge control register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

> Decode the "VGA 16-bit decode" bit in the bridge control register.  This
> bit was added in the PCI-to-PCI Bridge Arch Spec, r1.2, sec 3.2.5.18.
> Note that the bit is only meaningful if the VGA Enable bit or the VGA
> Palette Snoop Enable bit is set.

Thanks, applied.

				Have a nice fortnight
-- 
Martin `MJ' Mares                          <mj@xxxxxx>   http://mj.ucw.cz/
Faculty of Math and Physics, Charles University, Prague, Czech Rep., Earth
A sine curve goes off to infinity or at least the end of the blackboard.



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux