Legacy INTD IRQ handling is broken on dra7xx due to fact that driver
uses hwirq in range of 1-4 for INTA, INTD whereas IRQ domain is of size
4 which is numbered 0-3. Therefore when INTD IRQ line is used with
pci-dra7xx driver following warning is seen:
WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:342 irq_domain_associate+0x12c/0x1c4
error: hwirq 0x4 is too large for dummy
Fix this by using pci_irqd_intx_xlate() helper to translate the INTx 1-4
range into the 0-3 as done in other PCIe drivers.
Suggested-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Reported-by: Chris Welch <Chris.Welch@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Vignesh R <vigneshr@xxxxxx>
---
drivers/pci/dwc/pci-dra7xx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index 58aed0896468..892f93910012 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -226,6 +226,7 @@ static int dra7xx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
static const struct irq_domain_ops intx_domain_ops = {
.map = dra7xx_pcie_intx_map,
+ .xlate = pci_irqd_intx_xlate,
};
static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
@@ -269,7 +270,7 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
case INTC:
case INTD:
generic_handle_irq(irq_find_mapping(dra7xx->irq_domain,
- ffs(reg)));
+ ffs(reg) - 1));
break;
}
--
2.15.1
