Hi Niklas,
Às 11:29 PM de 12/19/2017, Niklas Cassel escreveu:
> Use the DMA-API to get the MSI address. This address will be written to
> our PCI config space and to the register which determines which AXI
> address the DWC IP will spoof for incoming MSI irqs.
>
> Since it is a PCIe endpoint device, rather than the CPU, that is supposed
> to write to the MSI address, the proper way to get the MSI address is by
> using the DMA API, not by using virt_to_phys().
>
> Using virt_to_phys() might work on some systems, but using the DMA API
> should work on all systems.
>
> This is essentially the same thing as allocating a buffer in a driver
> to which the endpoint will write to. To do this, we use the DMA API.
>
> Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx>
> ---
> drivers/pci/dwc/pcie-designware-host.c | 15 ++++++++++++---
> drivers/pci/dwc/pcie-designware.h | 3 ++-
> 2 files changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pci/dwc/pcie-designware-host.c b/drivers/pci/dwc/pcie-designware-host.c
> index 81e2157a7cfb..bf558df5b7b3 100644
> --- a/drivers/pci/dwc/pcie-designware-host.c
> +++ b/drivers/pci/dwc/pcie-designware-host.c
> @@ -83,10 +83,19 @@ irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
>
> void dw_pcie_msi_init(struct pcie_port *pp)
> {
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct device *dev = pci->dev;
> + struct page *page;
> u64 msi_target;
>
> - pp->msi_data = __get_free_pages(GFP_KERNEL, 0);
> - msi_target = virt_to_phys((void *)pp->msi_data);
> + page = alloc_page(GFP_KERNEL);
> + pp->msi_data = dma_map_page(dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE);
> + if (dma_mapping_error(dev, pp->msi_data)) {
> + dev_err(dev, "failed to map MSI data\n");
> + __free_page(page);
> + return;
> + }
> + msi_target = (u64)pp->msi_data;
>
> /* program the msi_data */
> dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4,
> @@ -187,7 +196,7 @@ static void dw_msi_setup_msg(struct pcie_port *pp, unsigned int irq, u32 pos)
> if (pp->ops->get_msi_addr)
> msi_target = pp->ops->get_msi_addr(pp);
> else
> - msi_target = virt_to_phys((void *)pp->msi_data);
> + msi_target = (u64)pp->msi_data;
>
> msg.address_lo = (u32)(msi_target & 0xffffffff);
> msg.address_hi = (u32)(msi_target >> 32 & 0xffffffff);
> diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
> index e5d9d77b778e..ecdede68522a 100644
> --- a/drivers/pci/dwc/pcie-designware.h
> +++ b/drivers/pci/dwc/pcie-designware.h
> @@ -14,6 +14,7 @@
> #ifndef _PCIE_DESIGNWARE_H
> #define _PCIE_DESIGNWARE_H
>
> +#include <linux/dma-mapping.h>
> #include <linux/irq.h>
> #include <linux/msi.h>
> #include <linux/pci.h>
> @@ -168,7 +169,7 @@ struct pcie_port {
> const struct dw_pcie_host_ops *ops;
> int msi_irq;
> struct irq_domain *irq_domain;
> - unsigned long msi_data;
> + dma_addr_t msi_data;
> DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
> };
>
>
Makes total sense! Thanks.
Acked-by: Joao Pinto <jpinto@xxxxxxxxxxxx>
