On 14/12/17 02:32, Bryant G. Ly wrote:
> After initial validation of SR-IOV resources, firmware will
> associate PEs to the dynamic VFs created within this call. This
> patch adds the association of PEs to the PF array of PE numbers
> indexed by VF.
>
> Signed-off-by: Bryant G. Ly <bryantly@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Juan J. Alvarez <jjalvare@xxxxxxxxxxxxxxxxxx>
> ---
> arch/powerpc/platforms/pseries/pci.c | 156 ++++++++++++++++++++++++++++++++++-
> 1 file changed, 153 insertions(+), 3 deletions(-)
>
> diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
> index 48d3af026f90..c90e7d1247a8 100644
> --- a/arch/powerpc/platforms/pseries/pci.c
> +++ b/arch/powerpc/platforms/pseries/pci.c
> @@ -57,18 +57,168 @@ void pcibios_name_device(struct pci_dev *dev)
> }
> DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_name_device);
> #endif
> -
> #ifdef CONFIG_PCI_IOV
> +#define MAX_VFS_FOR_MAP_PE 256
> +struct pe_map_bar_entry {
> + __be64 bar; ///< Input: Virtual Function BAR
> + __be16 rid; ///< Input: Virtual Function Router ID
> + __be16 pe_num; ///< Output: Virtual Function PE Number
> + __be32 reserved; ///< Reserved Space
'///<' is a very unusual commenting style...
> +};
> +
> +int pseries_send_map_pe(struct pci_dev *pdev,
> + u16 num_vfs,
> + struct pe_map_bar_entry *vf_pe_array)
> +{
> + struct pci_dn *pdn;
> + int rc;
Spaces?
> + unsigned long buid, addr;
> + int ibm_map_pes = rtas_token("ibm,open-sriov-map-pe-number");
> +
> + if (ibm_map_pes == RTAS_UNKNOWN_SERVICE)
> + return -EINVAL;
> +
> + pdn = pci_get_pdn(pdev);
> + addr = rtas_config_addr(pdn->busno, pdn->devfn, 0);
> + buid = pdn->phb->buid;
> + spin_lock(&rtas_data_buf_lock);
> + memcpy(rtas_data_buf, vf_pe_array,
> + RTAS_DATA_BUF_SIZE);
> + rc = rtas_call(ibm_map_pes, 5, 1, NULL, addr,
> + BUID_HI(buid), BUID_LO(buid),
> + rtas_data_buf,
> + num_vfs * sizeof(struct pe_map_bar_entry));
> + memcpy(vf_pe_array, rtas_data_buf,
> + RTAS_DATA_BUF_SIZE);
Can easily be a single line.
> + spin_unlock(&rtas_data_buf_lock);
> +
> + if (rc)
> + dev_err(&pdev->dev,
> + "%s: Failed to associate pes PE#%lx, rc=%x\n",
> + __func__, addr, rc);
> +
> + return rc;
> +}
> +
> +void pseries_set_pe_num(struct pci_dev *pdev,
Spaces again :)
> + u16 vf_index, __be16 pe_num)
> +{
> + struct pci_dn *pdn;
> +
> + pdn = pci_get_pdn(pdev);
> + pdn->pe_num_map[vf_index] = be16_to_cpu(pe_num);
> + dev_dbg(&pdev->dev, "VF %04x:%02x:%02x.%x associated with PE#%x\n",
> + pci_domain_nr(pdev->bus),
> + pdev->bus->number,
> + PCI_SLOT(pci_iov_virtfn_devfn(pdev, vf_index)),
> + PCI_FUNC(pci_iov_virtfn_devfn(pdev, vf_index)),
> + pdn->pe_num_map[vf_index]);
> +}
> +
> +int pseries_associate_pes(struct pci_dev *pdev, u16 num_vfs)
> +{
> + struct pci_dn *pdn;
> + int i, rc, vf_index;
Spaces.
> + struct pe_map_bar_entry *vf_pe_array;
> + struct resource *res;
> + u64 size;
> +
> + vf_pe_array = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
> + if (!vf_pe_array)
> + return -ENOMEM;
> +
> + memset(vf_pe_array, 0, RTAS_DATA_BUF_SIZE);
As mentioned elsewhere, kzalloc() above resets memory.
> + pdn = pci_get_pdn(pdev);
> + /* create firmware structure to associate pes */
> + for (vf_index = 0; vf_index < num_vfs && vf_index < MAX_VFS_FOR_MAP_PE;
It would make the code and your life easier if you check for
num_vfs<=MAX_VFS_FOR_MAP_PE in pseries_pci_sriov_enable() and then you
won't have to check for MAX_VFS_FOR_MAP_PE. As for now, if
num_vfs>=MAX_VFS_FOR_MAP_PE, all VFs above MAX_VFS_FOR_MAP_PE will be ignored.
> + vf_index++) {
> + pdn->pe_num_map[vf_index] = IODA_INVALID_PE;
> + for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
> + res = &pdev->resource[i + PCI_IOV_RESOURCES];
> + if (!res->parent)
> + continue;
> + size = pcibios_iov_resource_alignment(pdev, i +
> + PCI_IOV_RESOURCES
> + );
afaik the kernel coding style is tolerant to 2 tabs indents so it is not
necessary to align under the opening bracket and you can do:
> + size = pcibios_iov_resource_alignment(pdev,
i + PCI_IOV_RESOURCES);
> + vf_pe_array[vf_index].bar =
> + be64_to_cpu(res->start + size * vf_index);
cpu_to_be64?
> + vf_pe_array[vf_index].rid =
> + be16_to_cpu((pci_iov_virtfn_bus(pdev, vf_index)
> + << 8) | pci_iov_virtfn_devfn(pdev,
> + vf_index));
cpu_to_be16?
> + vf_pe_array[vf_index].pe_num =
> + be16_to_cpu(IODA_INVALID_PE);
cpu_to_be16?
> + }
> + }
> +
> + rc = pseries_send_map_pe(pdev, num_vfs, vf_pe_array);
> + /* Only zero is success */
> + if (!rc)
> + for (vf_index = 0; vf_index < num_vfs && vf_index <
> + MAX_VFS_FOR_MAP_PE; vf_index++)
> + pseries_set_pe_num(pdev, vf_index,
> + vf_pe_array[vf_index].pe_num);
> +
> + kfree(vf_pe_array);
> + return rc;
> +}
> +
> +int pseries_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
> +{
> + struct pci_dn *pdn;
> + int rc;
> + const int *max_vfs;
> + int max_config_vfs;
> + struct device_node *dn = pci_device_to_OF_node(pdev);
> +
> + max_vfs = of_get_property(dn, "ibm,number-of-configurable-vfs", NULL);
> +
> + if (!max_vfs)
> + return -EINVAL;
> +
> + /* First integer stores max config */
> + max_config_vfs = of_read_number(&max_vfs[0], 1);
> + if (max_config_vfs < num_vfs) {
> + dev_err(&pdev->dev,
> + "Num VFs %x > %x Configurable VFs\n",
> + num_vfs, max_config_vfs);
> + return -EINVAL;
> + }
> +
> + pdn = pci_get_pdn(pdev);
> + pdn->pe_num_map = kmalloc_array(num_vfs,
> + sizeof(*pdn->pe_num_map),
> + GFP_KERNEL);
> + if (!pdn->pe_num_map)
> + return -ENOMEM;
> +
> + rc = pseries_associate_pes(pdev, num_vfs);
> +
> + /* Anything other than zero is failure */
> + if (rc) {
> + dev_err(&pdev->dev, "Failure to enable sriov: %x\n", rc);
> + kfree(pdn->pe_num_map);
> + } else {
> + pci_vf_drivers_autoprobe(pdev, false);
> + }
> +
> + return rc;
> +}
> +
> int pseries_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
> {
> /* Allocate PCI data */
> add_dev_pci_data(pdev);
> - pci_vf_drivers_autoprobe(pdev, false);
> - return 0;
> + return pseries_pci_sriov_enable(pdev, num_vfs);
> }
>
> int pseries_pcibios_sriov_disable(struct pci_dev *pdev)
> {
> + struct pci_dn *pdn;
> +
> + pdn = pci_get_pdn(pdev);
> + /* Releasing pe_num_map */
> + kfree(pdn->pe_num_map);
> /* Release PCI data */
> remove_dev_pci_data(pdev);
> pci_vf_drivers_autoprobe(pdev, true);
>
--
Alexey
