On Fri, Dec 01, 2017 at 11:43:11AM +0530, Vignesh R wrote:
> Legacy INTD IRQ handling is broken on dra7xx due to fact that driver
> uses hwirq in range of 1-4 for INTA, INTD whereas IRQ domain is of size
> 4 which is numbered 0-3. Therefore when INTD IRQ line is used with
> pci-dra7xx driver following warning is seen:
>
> WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:342 irq_domain_associate+0x12c/0x1c4
> error: hwirq 0x4 is too large for dummy
>
> Fix this by using pci_irqd_intx_xlate() helper to translate the INTx 1-4
> range into the 0-3 as done in other PCIe drivers.
>
> Also, iterate over all the INTx bits and call their respective IRQ
> handlers before clearing the status register.
It seems to me that you are fixing two bugs with one patch and therefore
I would ask you to split it in two or explain to me why we should
consider lumping them together.
Thanks,
Lorenzo
> Suggested-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Reported-by: Chris Welch <Chris.Welch@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Vignesh R <vigneshr@xxxxxx>
> ---
> drivers/pci/dwc/pci-dra7xx.c | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
> index 53f721d1cc40..59e8de34cec6 100644
> --- a/drivers/pci/dwc/pci-dra7xx.c
> +++ b/drivers/pci/dwc/pci-dra7xx.c
> @@ -226,6 +226,7 @@ static int dra7xx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
>
> static const struct irq_domain_ops intx_domain_ops = {
> .map = dra7xx_pcie_intx_map,
> + .xlate = pci_irqd_intx_xlate,
> };
>
> static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
> @@ -256,7 +257,8 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
> struct dra7xx_pcie *dra7xx = arg;
> struct dw_pcie *pci = dra7xx->pci;
> struct pcie_port *pp = &pci->pp;
> - u32 reg;
> + unsigned long reg;
> + u32 virq, bit;
>
> reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
>
> @@ -268,8 +270,11 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
> case INTB:
> case INTC:
> case INTD:
> - generic_handle_irq(irq_find_mapping(dra7xx->irq_domain,
> - ffs(reg)));
> + for_each_set_bit(bit, ®, PCI_NUM_INTX) {
> + virq = irq_find_mapping(dra7xx->irq_domain, bit);
> + if (virq)
> + generic_handle_irq(virq);
> + }
> break;
> }
>
> --
> 2.15.0
>
