On Wed, Dec 06, 2017 at 12:32:56PM +0530, Subrahmanya Lingappa wrote: > Lorenzo, > I have fixed my mailer along with additional comments received by > other reviewers and submitted v4 patch please review. I have noticed, I am currently travelling but I will try to get to it shortly. Thanks, Lorenzo > Thanks. > > On Thu, Nov 23, 2017 at 8:21 PM, Lorenzo Pieralisi > <lorenzo.pieralisi@xxxxxxx> wrote: > > On Thu, Nov 23, 2017 at 03:37:46PM +0530, Subrahmanya Lingappa wrote: > > > > [...] > > > >> >> diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt > >> >> b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt > >> >> new file mode 100644 > >> >> index 0000000..c9e9818 > >> >> --- /dev/null > >> >> +++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt > >> >> @@ -0,0 +1,68 @@ > >> >> +* Mobiveil AXI PCIe Root Port Bridge DT description > >> > > >> > Please read the DT guidelines before submitting v4: > >> > > >> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/submitting-patches.txt?h=v4.14 > >> > > >> > Add a brief IP description. > >> > > >> >> +Required properties: > >> >> +- #address-cells: Address representation for root ports, set to <3> > >> >> +- #size-cells: Size representation for root ports, set to <2> > >> >> +- #interrupt-cells: specifies the number of cells needed to encode an > >> >> + interrupt source. The value must be 1. > >> >> +- compatible: Should contain "mbvl,axi-pcie-host-1.00" > >> > > >> > See documentation above. > >> > > >> >> +- reg: Should contain AXI PCIe registers location and length > >> >> +- device_type: must be "pci" > >> >> +- apio-wins : number of configured apio outbound windows > >> >> +- ppio-wins : number of configured ppio inbound windows > >> >> +- interrupts: Should contain AXI PCIe interrupt > >> > > >> > What's an AXI interrupt ? > >> > >> Thats IRQ number of the AXI interconnect, shall I change into following ? > > I do not understand what IRQ number of the AXI interconnect is, I know > > you copied this from the Xilinx bindings but I do not understand it > > regardless. > > > >> - interrupts: Should contain PCIe interrupt number > > > > "interrupts: PCIe controller interrupt line(s)" > > > > that's what you mean I think. > > > >> >> +- interrupt-map-mask, > >> >> + interrupt-map: standard PCI properties to define the mapping of the > >> >> + PCI interface to interrupt numbers. > >> >> +- ranges: ranges for the PCI memory regions (I/O space region is not > >> >> + supported by hardware) > >> >> + Please refer to the standard PCI bus binding document for a more > >> >> + detailed explanation > >> >> + > >> >> +- bus-range: PCI bus numbers covered > >> >> + > >> >> +Interrupt controller child node > >> >> ++++++++++++++++++++++++++++++++ > >> >> +Required properties: > >> >> +- interrupt-controller: identifies the node as an interrupt controller > >> >> +- #address-cells: specifies the number of cells needed to encode an > >> >> + address. The value must be 0. > >> >> +- #interrupt-cells: specifies the number of cells needed to encode an > >> >> + interrupt source. The value must be 1. > >> >> + > >> >> +NOTE: > >> >> +The core provides a single interrupt for both INTx/MSI messages. So, > >> >> +created a interrupt controller node to support 'interrupt-map' DT > >> >> +functionality. The driver will create an IRQ domain for this map, decode > >> >> +the four INTx interrupts in ISR and route them to this domain. > >> > > >> > DT bindings do not describe what the Linux kernel does, they describe > >> > your HW, so please read the binding you wrote and make sure that's the > >> > case. > >> > > >> > >> I followed the Xilinx example in the same folder, have used the > >> similar fields and > >> explanations. > >> You mean I need to explain what individual reg-names actually used in driver ? > > > > No. I mean that Xilinx bindings are wrong too. DT bindings should not > > describe what a Linux kernel driver does since they are meant to > > be OS agnostic and just describe HW. So remove the NOTE or reword > > it in a way that does not describe what the Linux kernel does. > > > >> I will do that if so. > >> > >> >> +Example: > >> >> +++++++++ > >> >> + pci_express: axi-pcie@a0000000 { > >> >> + #address-cells = <3>; > >> >> + #size-cells = <2>; > >> >> + #interrupt-cells = <1>; > >> >> + compatible = "mbvl,axi-pcie-host-1.00"; > >> >> + reg = < 0xa0000000 0x00001000 >, > >> >> + < 0xb0000000 0x00010000 >, > >> >> + < 0xFF000000 0x00200000 >, > >> >> + < 0xb0010000 0x00001000 >; > >> >> + reg-names = "config_axi_slave", > >> >> + "csr_axi_slave", > >> >> + "gpio_slave", > >> >> + "apb_csr"; > >> >> + > >> >> + device_type = "pci"; > >> >> + apio-wins = <3>; > >> >> + ppio-wins = <3>; > >> >> + interrupt-parent = <&gic>; > >> >> + interrupts = < 0 89 4 >; > >> >> + interrupt-controller; > >> >> + interrupt-map-mask = <0 0 0 7>; > >> >> + interrupt-map = <0 0 0 1 &pci_express 1>, > >> >> + <0 0 0 2 &pci_express 2>, > >> >> + <0 0 0 3 &pci_express 3>, > >> >> + <0 0 0 4 &pci_express 4>; > >> >> + ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>; > >> > > >> > Add an interrupt controller node because I want to understand how you > >> > represent it. > >> > > >> interrupt controller node is already present here and as per > >> https://elinux.org/Device_Tree_Usage#How_Interrupts_Work > >> we already have all 4 required fields. > >> Can you please give me an example binding in this folder to understand > >> what you are looking for ? > > > > You say in the binding that the interrupt-controller is a child node. > > > > In your example it is not (and should probably be to make this > > uniform with other PCI controller bindings). > > > > Lorenzo > > > >> > I will get to the code below tomorrow. > >> > > >> > Thanks, > >> > Lorenzo > >> > > >> >> + }; > >> >> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt > >> >> b/Documentation/devicetree/bindings/vendor-prefixes.txt > >> >> index f0a48ea..be61439 100644 > >> >> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > >> >> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > >> >> @@ -179,6 +179,7 @@ msi Micro-Star International Co. Ltd. > >> >> mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) > >> >> mundoreader Mundo Reader S.L. > >> >> murata Murata Manufacturing Co., Ltd. > >> >> +mbvl Mobiveil Inc. > >> >> mxicy Macronix International Co., Ltd. > >> >> national National Semiconductor > >> >> nec NEC LCD Technologies, Ltd. > >> >> diff --git a/MAINTAINERS b/MAINTAINERS > >> >> index 63cefa6..d7dc6c3 100644 > >> >> --- a/MAINTAINERS > >> >> +++ b/MAINTAINERS > >> >> @@ -9336,6 +9336,13 @@ F: > >> >> Documentation/devicetree/bindings/pci/host-generic-pci.txt > >> >> F: drivers/pci/host/pci-host-common.c > >> >> F: drivers/pci/host/pci-host-generic.c > >> >> > >> >> +PCI DRIVER FOR MOBIVEIL PCIE IP > >> >> +M: Subrahmanya Lingappa <l.subrahmanya@xxxxxxxxxxxxxx> > >> >> +L: linux-pci@xxxxxxxxxxxxxxx > >> >> +S: Supported > >> >> +F: Documentation/devicetree/bindings/pci/mobiveil-pcie.txt > >> >> +F: drivers/pci/host/pcie-mobiveil.c > >> >> + > >> >> PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD) > >> >> M: Keith Busch <keith.busch@xxxxxxxxx> > >> >> L: linux-pci@xxxxxxxxxxxxxxx > >> >> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig > >> >> index 6f1de4f..d8fb02d 100644 > >> >> --- a/drivers/pci/host/Kconfig > >> >> +++ b/drivers/pci/host/Kconfig > >> >> @@ -37,6 +37,14 @@ config PCIE_XILINX_NWL > >> >> or End Point. The current option selection will only > >> >> support root port enabling. > >> >> > >> >> +config PCIE_MOBIVEIL > >> >> + bool "Mobiveil AXI PCIe host bridge support" > >> >> + depends on ARCH_ZYNQMP || COMPILE_TEST > >> >> + depends on PCI_MSI_IRQ_DOMAIN > >> >> + help > >> >> + Say 'Y' here if you want kernel to support the Mobiveil AXI PCIe > >> >> + Host Bridge driver. > >> >> + > >> >> config PCIE_DW_PLAT > >> >> bool "Platform bus based DesignWare PCIe Controller" > >> >> depends on PCI_MSI_IRQ_DOMAIN > >> >> @@ -103,6 +111,7 @@ config PCI_HOST_GENERIC > >> >> Say Y here if you want to support a simple generic PCI host > >> >> controller, such as the one emulated by kvmtool. > >> >> > >> >> + > >> >> config PCIE_SPEAR13XX > >> >> bool "STMicroelectronics SPEAr PCIe controller" > >> >> depends on ARCH_SPEAR13XX > >> >> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile > >> >> index 9b113c2..d851978 100644 > >> >> --- a/drivers/pci/host/Makefile > >> >> +++ b/drivers/pci/host/Makefile > >> >> @@ -34,3 +34,4 @@ obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o > >> >> obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o > >> >> obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o > >> >> obj-$(CONFIG_VMD) += vmd.o > >> >> +obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o > >> >> diff --git a/drivers/pci/host/pcie-mobiveil.c > >> >> b/drivers/pci/host/pcie-mobiveil.c > >> >> new file mode 100644 > >> >> index 0000000..abc6adf > >> >> --- /dev/null > >> >> +++ b/drivers/pci/host/pcie-mobiveil.c > >> >> @@ -0,0 +1,899 @@ > >> >> +/* > >> >> + * PCIe host controller driver for Mobiveil PCIe Host controller > >> >> + * > >> >> + * Copyright Mobiveil Corporation (C) 2013-2017. All rights reserved > >> >> + * > >> >> + * This program is free software; you can redistribute it and/or modify it > >> >> + * under the terms and conditions of the GNU General Public License, > >> >> + * version 2, as published by the Free Software Foundation. > >> >> + * > >> >> + * This program is distributed in the hope it will be useful, but WITHOUT > >> >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > >> >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public > >> >> License for > >> >> + * more details. > >> >> + * > >> >> + * You should have received a copy of the GNU General Public > >> >> License along with > >> >> + * this program. If not, see <http://www.gnu.org/licenses/>. > >> >> + */ > >> >> + > >> >> +#include <linux/delay.h> > >> >> +#include <linux/interrupt.h> > >> >> +#include <linux/irqchip/chained_irq.h> > >> >> +#include <linux/module.h> > >> >> +#include <linux/of_address.h> > >> >> +#include <linux/of_irq.h> > >> >> +#include <linux/irq.h> > >> >> +#include <linux/msi.h> > >> >> +#include <linux/of_pci.h> > >> >> +#include <linux/pci.h> > >> >> +#include <linux/platform_device.h> > >> >> +#include <linux/slab.h> > >> >> +#include <linux/kernel.h> > >> >> +#include <linux/irqdomain.h> > >> >> +#include <linux/init.h> > >> >> +#include <linux/of_platform.h> > >> >> + > >> >> +/* Register Offsets and Bit Positions*/ > >> >> + > >> >> +#define WIN_NUM_0 0 > >> >> +#define WIN_NUM_1 1 > >> >> + > >> >> +#define CFG_WINDOW_TYPE 0 > >> >> +#define IO_WINDOW_TYPE 1 > >> >> +#define MEM_WINDOW_TYPE 2 > >> >> +#define MAX_PIO_WINDOWS 8 > >> >> + > >> >> +#define PAB_INTA_POS 5 > >> >> +#define OP_READ 0 > >> >> +#define OP_WRITE 1 > >> >> + > >> >> +#define IB_WIN_SIZE_KB (256*1024*1024) > >> >> + > >> >> +#define LTSSM_STATE_STATUS 0x0404 > >> >> +#define LTSSM_STATUS_CODE_MASK 0x3F > >> >> +#define LTSSM_STATUS_CODE 0x2D /* LTSSM Status Code L0 */ > >> >> + > >> >> +#define PAB_CTRL 0x0808 > >> >> +#define AMBA_PIO_ENABLE_SHIFT 0 > >> >> +#define PEX_PIO_ENABLE_SHIFT 1 > >> >> +#define PAGE_SEL_SHIFT 13 > >> >> +#define PAGE_SEL_MASK 0x3f > >> >> +#define PAGE_SEL_OFFSET_SHIFT 10 > >> >> + > >> >> +#define PAB_AXI_PIO_CTRL 0x0840 > >> >> +#define APIO_EN_MASK 0xf > >> >> + > >> >> +#define PAB_PEX_PIO_CTRL 0x08C0 > >> >> +#define PIO_ENABLE_SHIFT 0 > >> >> +#define PAB_INTP_AMBA_MISC_ENB 0x0B0C > >> >> +#define PAB_INTP_AMBA_MISC_STAT 0x0B1C > >> >> +#define PAB_INTP_INTX_MASK 0x1E0 /* INTx(A-D) */ > >> >> +#define PAB_INTP_MSI_MASK 0x8 > >> >> + > >> >> +#define PAB_AXI_AMAP_CTRL(win_num) (0x0BA0 + (0x10*win_num)) > >> >> +#define WIN_ENABLE_SHIFT 0 > >> >> +#define WIN_TYPE_SHIFT 1 > >> >> +#define WIN_SIZE_SHIFT 10 > >> >> +#define PAB_EXT_AXI_AMAP_SIZE(win_num) (0xBAF0 + (0x4*win_num)) > >> >> + > >> >> +#define PAB_AXI_AMAP_AXI_WIN(win_num) (0x0BA4 + (0x10*win_num)) > >> >> +#define AXI_WINDOW_BASE_SHIFT 2 > >> >> + > >> >> +#define PAB_AXI_AMAP_PEX_WIN_L(win_num) (0x0BA8 + (0x10*win_num)) > >> >> +#define PAB_BUS_SHIFT 24 > >> >> +#define PAB_DEVICE_SHIFT 19 > >> >> +#define PAB_FUNCTION_SHIFT 16 > >> >> + > >> >> +#define PAB_AXI_AMAP_PEX_WIN_H(win_num) (0x0BAC + (0x10*win_num)) > >> >> +#define PAB_INTP_AXI_PIO_CLASS 0x474 > >> >> + > >> >> +#define PAB_PEX_AMAP_CTRL(win_num) (0x4BA0 + (0x10*win_num)) > >> >> +#define AMAP_CTRL_EN_SHIFT 0 > >> >> +#define AMAP_CTRL_TYPE_SHIFT 1 /* 0: interrupt, 2: memory */ > >> >> + > >> >> +#define PAB_EXT_PEX_AMAP_SIZEN(win_num) (0xBEF0 + (0x4*win_num)) > >> >> +#define PAB_PEX_AMAP_AXI_WIN(win_num) (0x4BA4 + (0x10*win_num)) > >> >> +#define PAB_PEX_AMAP_PEX_WIN_L(win_num) (0x4BA8 + (0x10*win_num)) > >> >> +#define PAB_PEX_AMAP_PEX_WIN_H(win_num) (0x4BAC + (0x10*win_num)) > >> >> + > >> >> +#define PCI_NUM_INTX 4 > >> >> +#define PCI_NUM_MSI 16 > >> >> + > >> >> +#define MSI_BASE_LO_OFFSET 0x04 > >> >> +#define MSI_BASE_HI_OFFSET 0x08 > >> >> +#define MSI_SIZE_OFFSET 0x0c > >> >> +#define MSI_ENABLE_OFFSET 0x14 > >> >> +#define MSI_ENABLE_SHIFT 0 > >> >> +#define MSI_STATUS_OFFSET 0x18 > >> >> +#define MSI_STATUS_SHIFT 0 > >> >> +#define MSI_OCCUPANCY_OFFSET 0x1c > >> >> +#define MSI_DATA_OFFSET 0x20 > >> >> +#define MSI_ADDR_L_OFFSET 0x24 > >> >> +#define MSI_ADDR_H_OFFSET 0x28 > >> >> +#define ilog2_u32(num) (__ffs(num)-1) > >> >> + > >> >> +/* > >> >> + * PCIe port information > >> >> + */ > >> >> +struct mobiveil_pcie { > >> >> + struct platform_device *pdev; > >> >> + void __iomem *config_axi_slave_base; /* endpoint config base */ > >> >> + void __iomem *csr_axi_slave_base; /* root port config base */ > >> >> + void __iomem *gpio_slave_base; /* GPIO register base */ > >> >> + void __iomem *apb_csr_base; /* MSI register base */ > >> >> + struct irq_domain *irq_domain; > >> >> + struct resource bus_range; > >> >> + struct list_head resources; > >> >> + int *msi_pages; > >> >> + int *msi_pages_phys; > >> >> + char root_bus_nr; > >> >> + int irq; > >> >> + int apio_wins; > >> >> + int ppio_wins; > >> >> + int ob_wins_configured; /* configured outbound windows */ > >> >> + int ib_wins_configured; /* configured inbound windows */ > >> >> + struct resource *ob_io_res; > >> >> + struct resource *ob_mem_res[3]; > >> >> +}; > >> >> + > >> >> +static DECLARE_BITMAP(msi_irq_in_use, PCI_NUM_MSI); > >> >> + > >> >> +static inline void csr_writel(struct mobiveil_pcie *pcie, > >> >> + const unsigned int value, const unsigned int reg) > >> >> +{ > >> >> + writel_relaxed(value, pcie->csr_axi_slave_base + reg); > >> >> +} > >> >> + > >> >> +static inline unsigned int csr_readl(struct mobiveil_pcie *pcie, > >> >> + const unsigned int reg) > >> >> +{ > >> >> + return readl_relaxed(pcie->csr_axi_slave_base + reg); > >> >> +} > >> >> + > >> >> +static inline int gpio_read(struct mobiveil_pcie *pcie, int addr) > >> >> +{ > >> >> + return ioread32(pcie->gpio_slave_base + addr); > >> >> +} > >> >> + > >> >> +static inline void gpio_write(struct mobiveil_pcie *pcie, int val, > >> >> int addr) > >> >> +{ > >> >> + iowrite32(val, pcie->gpio_slave_base + addr); > >> >> + if (val != gpio_read(pcie, addr)) { > >> >> + dev_info(&pcie->pdev->dev, > >> >> + "WARNING:gpio_write: expected : %x at: %x, found: %x\n ", > >> >> + val, addr, gpio_read(pcie, addr)); > >> >> + } > >> >> +} > >> >> + > >> >> +static bool mobiveil_pcie_link_is_up(struct mobiveil_pcie *pcie) > >> >> +{ > >> >> + return (csr_readl(pcie, LTSSM_STATE_STATUS) & > >> >> + LTSSM_STATUS_CODE_MASK) == LTSSM_STATUS_CODE; > >> >> +} > >> >> + > >> >> +static bool mobiveil_pcie_valid_device(struct pci_bus *bus, > >> >> unsigned int devfn) > >> >> +{ > >> >> + struct mobiveil_pcie *pcie = bus->sysdata; > >> >> + > >> >> + /* Check if link is up when trying to access downstream ports */ > >> >> + if (bus->number != pcie->root_bus_nr) > >> >> + if (!mobiveil_pcie_link_is_up(pcie)) > >> >> + return false; > >> >> + > >> >> + /* Only one device down on each root port */ > >> >> + if ((bus->number == pcie->root_bus_nr) && (devfn > 0)) > >> >> + return false; > >> >> + > >> >> + /* > >> >> + * Do not read more than one device on the bus directly > >> >> + * attached to RC > >> >> + */ > >> >> + if ((bus->primary == pcie->root_bus_nr) && (devfn > 0)) > >> >> + return false; > >> >> + > >> >> + return true; > >> >> +} > >> >> + > >> >> +/* > >> >> + * mobiveil_pcie_map_bus - routine to get the configuration base of either > >> >> + * root port or endpoint > >> >> + * > >> >> + * Relies on pci_lock serialization > >> >> + */ > >> >> +static void __iomem *mobiveil_pcie_map_bus(struct pci_bus *bus, > >> >> + unsigned int devfn, int where) > >> >> +{ > >> >> + struct mobiveil_pcie *pcie = bus->sysdata; > >> >> + unsigned int value; > >> >> + > >> >> + if (!mobiveil_pcie_valid_device(bus, devfn)) > >> >> + return NULL; > >> >> + > >> >> + if (bus->number == pcie->root_bus_nr) { > >> >> + /* RC config access (in CSR space) */ > >> >> + return pcie->csr_axi_slave_base + where; > >> >> + } else { > >> >> + /* > >> >> + * EP config access (in Config/APIO space) > >> >> + * Program PEX Address base (31..16 bits) with appropriate value > >> >> + * (BDF) in PAB_AXI_AMAP_PEX_WIN_L0 Register. > >> >> + */ > >> >> + > >> >> + /* Relies on pci_lock serialization */ > >> >> + value = csr_readl(pcie, PAB_AXI_AMAP_PEX_WIN_L(0)); > >> >> + csr_writel(pcie, > >> >> + bus->number << PAB_BUS_SHIFT | > >> >> + (devfn >> 3) << PAB_DEVICE_SHIFT | > >> >> + (devfn & 7) << PAB_FUNCTION_SHIFT, > >> >> + PAB_AXI_AMAP_PEX_WIN_L(0)); > >> >> + return pcie->config_axi_slave_base + where; > >> >> + } > >> >> +} > >> >> + > >> >> +static struct pci_ops mobiveil_pcie_ops = { > >> >> + .map_bus = mobiveil_pcie_map_bus, > >> >> + .read = pci_generic_config_read, > >> >> + .write = pci_generic_config_write, > >> >> +}; > >> >> + > >> >> +static irqreturn_t mobiveil_pcie_isr(int irq, void *data) > >> >> +{ > >> >> + struct mobiveil_pcie *pcie = (struct mobiveil_pcie *)data; > >> >> + unsigned int fifo_occ; > >> >> + unsigned int msi_addr_l, msi_addr_h, msi_data; > >> >> + unsigned int status, status2; > >> >> + unsigned long shifted_status; > >> >> + unsigned int bit1 = 0, virq; > >> >> + unsigned int val, mask; > >> >> + > >> >> + /* > >> >> + * The core provides a single interrupt for both INTx/MSI messages. > >> >> + * So we'll read both INTx and MSI statuses > >> >> + */ > >> >> + > >> >> + /* read INTx status */ > >> >> + val = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT); > >> >> + mask = csr_readl(pcie, PAB_INTP_AMBA_MISC_ENB); > >> >> + status = val & mask; > >> >> + > >> >> + /* Handle INTx */ > >> >> + if (status & PAB_INTP_INTX_MASK) { > >> >> + while ((shifted_status = > >> >> + (csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT) >> > >> >> + PAB_INTA_POS)) != 0) { > >> >> + for_each_set_bit(bit1, &shifted_status, PCI_NUM_INTX) { > >> >> + /* clear interrupts */ > >> >> + csr_writel(pcie, shifted_status << PAB_INTA_POS, > >> >> + PAB_INTP_AMBA_MISC_STAT); > >> >> + > >> >> + virq = > >> >> + irq_find_mapping(pcie->irq_domain, > >> >> + bit1 + 1); > >> >> + if (virq) > >> >> + generic_handle_irq(virq); > >> >> + else > >> >> + dev_err(&pcie->pdev->dev, > >> >> + "unexpected IRQ, INT%d\n", > >> >> + bit1); > >> >> + > >> >> + } > >> >> + shifted_status = 0; > >> >> + } > >> >> + } > >> >> + > >> >> + /* read MSI status */ > >> >> + status2 = readl(pcie->apb_csr_base + MSI_STATUS_OFFSET); > >> >> + > >> >> + /* handle MSI interrupts */ > >> >> + if ((status & PAB_INTP_MSI_MASK) > >> >> + || (status2 & (1 << MSI_STATUS_SHIFT))) { > >> >> + do { > >> >> + fifo_occ = readl(pcie->apb_csr_base > >> >> + + MSI_OCCUPANCY_OFFSET); > >> >> + msi_data = readl(pcie->apb_csr_base + MSI_DATA_OFFSET); > >> >> + msi_addr_l = readl(pcie->apb_csr_base > >> >> + + MSI_ADDR_L_OFFSET); > >> >> + msi_addr_h = readl(pcie->apb_csr_base > >> >> + + MSI_ADDR_H_OFFSET); > >> >> + /* Handle MSI */ > >> >> + if (msi_data) > >> >> + generic_handle_irq(msi_data); > >> >> + else > >> >> + dev_err(&pcie->pdev->dev, "MSI data null\n"); > >> >> + > >> >> + status2 = readl(pcie->apb_csr_base + MSI_STATUS_OFFSET); > >> >> + } while ((status2 & (1 << MSI_STATUS_SHIFT))); > >> >> + } > >> >> + > >> >> + csr_writel(pcie, status, PAB_INTP_AMBA_MISC_STAT); > >> >> + return IRQ_HANDLED; > >> >> +} > >> >> + > >> >> +/* routine to parse device tree */ > >> >> +static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie) > >> >> +{ > >> >> + struct device *dev = &pcie->pdev->dev; > >> >> + struct platform_device *pdev = pcie->pdev; > >> >> + struct device_node *node = dev->of_node; > >> >> + resource_size_t iobase; > >> >> + struct resource *res; > >> >> + const char *type; > >> >> + int err; > >> >> + > >> >> + type = of_get_property(node, "device_type", NULL); > >> >> + if (!type || strcmp(type, "pci")) { > >> >> + dev_err(dev, "invalid \"device_type\" %s\n", type); > >> >> + return -EINVAL; > >> >> + } > >> >> + > >> >> + /* map config resource */ > >> >> + res = > >> >> + platform_get_resource_byname(pdev, IORESOURCE_MEM, > >> >> + "config_axi_slave"); > >> >> + pcie->config_axi_slave_base = devm_ioremap_resource(dev, res); > >> >> + if (IS_ERR(pcie->config_axi_slave_base)) > >> >> + return PTR_ERR(pcie->config_axi_slave_base); > >> >> + pcie->ob_io_res = res; > >> >> + > >> >> + /* map csr resource */ > >> >> + res = > >> >> + platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr_axi_slave"); > >> >> + pcie->csr_axi_slave_base = devm_ioremap_resource(dev, res); > >> >> + if (IS_ERR(pcie->csr_axi_slave_base)) > >> >> + return PTR_ERR(pcie->csr_axi_slave_base); > >> >> + > >> >> + /* map gpio resource */ > >> >> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gpio_slave"); > >> >> + pcie->gpio_slave_base = > >> >> + devm_ioremap_nocache(dev, res->start, resource_size(res)); > >> >> + if (IS_ERR(pcie->gpio_slave_base)) > >> >> + return PTR_ERR(pcie->gpio_slave_base); > >> >> + > >> >> + /* map gpio resource */ > >> >> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apb_csr"); > >> >> + pcie->apb_csr_base = > >> >> + devm_ioremap_nocache(dev, res->start, resource_size(res)); > >> >> + if (IS_ERR(pcie->apb_csr_base)) > >> >> + return PTR_ERR(pcie->apb_csr_base); > >> >> + > >> >> + /* read the number of windows requested */ > >> >> + if (!pcie->apio_wins && > >> >> + of_property_read_u32(node, "apio-wins", &pcie->apio_wins)) { > >> >> + pcie->apio_wins = MAX_PIO_WINDOWS; > >> >> + } > >> >> + > >> >> + if (!pcie->ppio_wins && > >> >> + of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins)) { > >> >> + pcie->ppio_wins = MAX_PIO_WINDOWS; > >> >> + } > >> >> + > >> >> + /* map IRQ resource */ > >> >> + pcie->irq = irq_of_parse_and_map(node, 0); > >> >> + err = devm_request_irq(&pdev->dev, pcie->irq, mobiveil_pcie_isr, > >> >> + IRQF_SHARED | IRQF_NO_THREAD, > >> >> + "mobiveil-pcie", pcie); > >> >> + if (err) { > >> >> + dev_err(&pdev->dev, "unable to request IRQ %d\n", pcie->irq); > >> >> + return err; > >> >> + } > >> >> + > >> >> + INIT_LIST_HEAD(&pcie->resources); > >> >> + /* parse the host bridge base addresses from the device tree file */ > >> >> + err = of_pci_get_host_bridge_resources(node, > >> >> + 0, 0xff, &pcie->resources, &iobase); > >> >> + if (err) { > >> >> + dev_err(dev, "Getting bridge resources failed\n"); > >> >> + return -ENOMEM; > >> >> + } > >> >> + > >> >> + return 0; > >> >> +} > >> >> + > >> >> +/* > >> >> + * access_paged_register - routine to access paged register of root complex > >> >> + * > >> >> + * registers of RC are paged, with pg_sel field of the PAB_CTRL > >> >> + * register needs to be updated with page of the register, before > >> >> + * accessing least significant 10 bits offset > >> >> + * > >> >> + * This routine does the PAB_CTRL updation and split access of the > >> >> + * offset > >> >> + * > >> >> + */ > >> >> +static unsigned int access_paged_register(struct mobiveil_pcie *pcie, > >> >> + unsigned int write, > >> >> + unsigned int val, > >> >> + unsigned int offset) > >> >> +{ > >> >> + int pab_ctrl_dw, pg_sel; > >> >> + unsigned int off = (offset & 0x3FF) + 0xC00; > >> >> + > >> >> + pab_ctrl_dw = csr_readl(pcie, PAB_CTRL); > >> >> + pg_sel = (offset >> PAGE_SEL_OFFSET_SHIFT) & PAGE_SEL_MASK; > >> >> + > >> >> + /* clear pg_sel field */ > >> >> + pab_ctrl_dw = (pab_ctrl_dw & ~(PAGE_SEL_MASK << PAGE_SEL_SHIFT)); > >> >> + > >> >> + /* set pg_sel field */ > >> >> + pab_ctrl_dw |= ((pg_sel << PAGE_SEL_SHIFT)); > >> >> + csr_writel(pcie, pab_ctrl_dw, PAB_CTRL); > >> >> + > >> >> + if (write == OP_WRITE) > >> >> + csr_writel(pcie, val, off); > >> >> + else > >> >> + return csr_readl(pcie, off); > >> >> + return 0; > >> >> + > >> >> +} > >> >> + > >> >> +/* > >> >> + * routine to program the inbound windows > >> >> + */ > >> >> +static void program_ib_windows(struct mobiveil_pcie *pcie, > >> >> + int win_num, > >> >> + int pci_addr, > >> >> + int type, > >> >> + int size_kb) > >> >> +{ > >> >> + int pio_ctrl_val; > >> >> + int amap_ctrl_dw; > >> >> + u64 size64 = (-1 << (WIN_SIZE_SHIFT + ilog2_u32(size_kb))); > >> >> + > >> >> + if ((pcie->ib_wins_configured + 1) > pcie->ppio_wins) { > >> >> + dev_err(&pcie->pdev->dev, > >> >> + "ERROR: trying for more than max inbound windows in device tree !\n"); > >> >> + return; > >> >> + } > >> >> + > >> >> + pio_ctrl_val = csr_readl(pcie, PAB_PEX_PIO_CTRL); > >> >> + csr_writel(pcie, > >> >> + pio_ctrl_val | (1 << PIO_ENABLE_SHIFT), PAB_PEX_PIO_CTRL); > >> >> + amap_ctrl_dw = access_paged_register(pcie, > >> >> + OP_READ, 0, PAB_PEX_AMAP_CTRL(win_num)); > >> >> + amap_ctrl_dw = (amap_ctrl_dw | (type << AMAP_CTRL_TYPE_SHIFT)); > >> >> + amap_ctrl_dw = (amap_ctrl_dw | (1 << AMAP_CTRL_EN_SHIFT)); > >> >> + > >> >> + access_paged_register(pcie, OP_WRITE, > >> >> + amap_ctrl_dw | (size64 & 0xFFFFFFFF), > >> >> + PAB_PEX_AMAP_CTRL(win_num)); > >> >> + > >> >> + access_paged_register(pcie, OP_WRITE, upper_32_bits(size64), > >> >> + PAB_EXT_PEX_AMAP_SIZEN(win_num)); > >> >> + > >> >> + access_paged_register(pcie, OP_WRITE, pci_addr, > >> >> + PAB_PEX_AMAP_AXI_WIN(win_num)); > >> >> + > >> >> + access_paged_register(pcie, OP_WRITE, pci_addr, > >> >> + PAB_PEX_AMAP_PEX_WIN_L(win_num)); > >> >> + > >> >> + access_paged_register(pcie, OP_WRITE, 0, > >> >> + PAB_PEX_AMAP_PEX_WIN_H(win_num)); > >> >> +} > >> >> + > >> >> +/* > >> >> + * routine to program the outbound windows > >> >> + */ > >> >> +static void program_ob_windows(struct mobiveil_pcie *pcie, > >> >> + int win_num, > >> >> + u64 cpu_addr, > >> >> + u64 pci_addr, > >> >> + int config_io_bit, > >> >> + int size_kb) > >> >> +{ > >> >> + > >> >> + unsigned int value, type; > >> >> + u64 size64 = (-1 << (WIN_SIZE_SHIFT + ilog2_u32(size_kb))); > >> >> + > >> >> + if ((pcie->ob_wins_configured + 1) > pcie->apio_wins) { > >> >> + dev_err(&pcie->pdev->dev, > >> >> + "ERROR: trying for more than max outbound windows in device tree !\n"); > >> >> + return; > >> >> + } > >> >> + > >> >> + > >> >> + /* > >> >> + * program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit > >> >> + * to 4 KB in PAB_AXI_AMAP_CTRL register > >> >> + */ > >> >> + type = config_io_bit; > >> >> + value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num)); > >> >> + csr_writel(pcie, > >> >> + 1 << WIN_ENABLE_SHIFT | > >> >> + type << WIN_TYPE_SHIFT | > >> >> + lower_32_bits(size64), > >> >> + PAB_AXI_AMAP_CTRL(win_num)); > >> >> + > >> >> + access_paged_register(pcie, OP_WRITE, upper_32_bits(size64), > >> >> + PAB_EXT_AXI_AMAP_SIZE(win_num)); > >> >> + > >> >> + /* > >> >> + * program AXI window base with appropriate value in > >> >> + * PAB_AXI_AMAP_AXI_WIN0 register > >> >> + */ > >> >> + value = csr_readl(pcie, PAB_AXI_AMAP_AXI_WIN(win_num)); > >> >> + csr_writel(pcie, > >> >> + cpu_addr >> AXI_WINDOW_BASE_SHIFT << > >> >> + AXI_WINDOW_BASE_SHIFT, PAB_AXI_AMAP_AXI_WIN(win_num)); > >> >> + > >> >> + value = csr_readl(pcie, PAB_AXI_AMAP_PEX_WIN_H(win_num)); > >> >> + > >> >> + csr_writel(pcie, lower_32_bits(pci_addr), > >> >> + PAB_AXI_AMAP_PEX_WIN_L(win_num)); > >> >> + csr_writel(pcie, upper_32_bits(pci_addr), > >> >> + PAB_AXI_AMAP_PEX_WIN_H(win_num)); > >> >> + > >> >> + pcie->ob_wins_configured++; > >> >> +} > >> >> + > >> >> +/* > >> >> + * routine to prepare the PCIe slot for power up > >> >> + */ > >> >> +static void mobiveil_pcie_establish_link(struct mobiveil_pcie *pcie) > >> >> +{ > >> >> + > >> >> + int secs = 4; > >> >> + > >> >> + /* send PRESET to the slot */ > >> >> + gpio_write(pcie, 0x80000000, 0xa0344); > >> >> + gpio_write(pcie, 0x80000000, 0xa0348); > >> >> + gpio_write(pcie, 0x00000000, 0xa0054); > >> >> + gpio_write(pcie, 0x80000000, 0xa0054); > >> >> + dev_info(&pcie->pdev->dev, > >> >> + "mobiveil_pcie_establish_link: waiting for %d seconds\n", > >> >> + secs); > >> >> + mdelay(secs * 1000); > >> >> +} > >> >> + > >> >> +static void mobiveil_bringup_link(struct mobiveil_pcie *pcie) > >> >> +{ > >> >> + int reset_cnt = 0; > >> >> + struct device *dev = &pcie->pdev->dev; > >> >> + > >> >> + if (!mobiveil_pcie_link_is_up(pcie)) { > >> >> + /* > >> >> + * if FSBL is not patched, link won't be up so let's bring it > >> >> + * up by writing DIRM and OEN registers EMIO 6:0 programming > >> >> + * sequence [3:0] = Link Width; [6:4] = Link Speed. Current > >> >> + * setting width=4, speed = 1 > >> >> + */ > >> >> + gpio_write(pcie, 0x7f, 0xa02c4); > >> >> + gpio_write(pcie, 0x7f, 0xa02c8); > >> >> + gpio_write(pcie, 0x14, 0xa004c); > >> >> + > >> >> + gpio_write(pcie, 0x0200, 0xa0244); > >> >> + gpio_write(pcie, 0x0200, 0xa0248); > >> >> + gpio_write(pcie, 0x37f7, 0x180208); > >> >> + gpio_write(pcie, 0xfdff, 0xa0044); > >> >> + > >> >> + mdelay(2 * 1000); > >> >> + > >> >> + while (!mobiveil_pcie_link_is_up(pcie)) { > >> >> + dev_info(dev, > >> >> + "%s: PRESET retry, reset_cnt : %d\n", > >> >> + __func__, reset_cnt++); > >> >> + mobiveil_pcie_establish_link(pcie); > >> >> + } > >> >> + > >> >> + } > >> >> + dev_info(dev, "link up\n"); > >> >> +} > >> >> + > >> >> +static void mobiveil_setup_config_access(struct mobiveil_pcie *pcie) > >> >> +{ > >> >> + unsigned int value; > >> >> + int type = 0; > >> >> + int pab_ctrl; > >> >> + struct resource_entry *win, *tmp; > >> >> + > >> >> + /* > >> >> + * program Bus Master Enable Bit in Command Register in PAB Config > >> >> + * Space > >> >> + */ > >> >> + value = csr_readl(pcie, PCI_COMMAND); > >> >> + csr_writel(pcie, > >> >> + value | > >> >> + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, > >> >> + PCI_COMMAND); > >> >> + > >> >> + /* > >> >> + * program PIO Enable Bit to 1 (and PEX PIO Enable to 1) in PAB_CTRL > >> >> + * register > >> >> + */ > >> >> + pab_ctrl = csr_readl(pcie, PAB_CTRL); > >> >> + csr_writel(pcie, pab_ctrl | (1 << AMBA_PIO_ENABLE_SHIFT) | > >> >> + (1 << PEX_PIO_ENABLE_SHIFT), > >> >> + PAB_CTRL); > >> >> + > >> >> + csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK), > >> >> + PAB_INTP_AMBA_MISC_ENB); > >> >> + > >> >> + /* program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in > >> >> + * PAB_AXI_PIO_CTRL Register > >> >> + */ > >> >> + value = csr_readl(pcie, PAB_AXI_PIO_CTRL); > >> >> + csr_writel(pcie, value | APIO_EN_MASK, PAB_AXI_PIO_CTRL); > >> >> + > >> >> + /* > >> >> + * we'll program one outbound window for config reads and > >> >> + * another default inbound window for all the upstream traffic > >> >> + * rest of the outbound windows will be configured according to > >> >> + * the "ranges" field defined in device tree > >> >> + */ > >> >> + > >> >> + /* config outbound translation window */ > >> >> + program_ob_windows(pcie, > >> >> + pcie->ob_wins_configured, pcie->ob_io_res->start, > >> >> + 0, > >> >> + CFG_WINDOW_TYPE, > >> >> + resource_size(pcie->ob_io_res)/1024); > >> >> + > >> >> + /* memory inbound translation window */ > >> >> + program_ib_windows(pcie, WIN_NUM_1, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE_KB); > >> >> + > >> >> + /* Get the I/O and memory ranges from DT */ > >> >> + resource_list_for_each_entry_safe(win, tmp, &pcie->resources) { > >> >> + type = 0; > >> >> + if (resource_type(win->res) == IORESOURCE_MEM) > >> >> + type = MEM_WINDOW_TYPE; > >> >> + if (resource_type(win->res) == IORESOURCE_IO) > >> >> + type = IO_WINDOW_TYPE; > >> >> + if (type) { > >> >> + /* configure outbound translation window */ > >> >> + pcie->ob_mem_res[pcie->ob_wins_configured] = win->res; > >> >> + program_ob_windows(pcie, > >> >> + pcie->ob_wins_configured, > >> >> + win->res->start, > >> >> + 0, > >> >> + type, > >> >> + resource_size(win->res)/1024); > >> >> + } > >> >> + } > >> >> + > >> >> + > >> >> + > >> >> +} > >> >> + > >> >> +/* routine to setup the INTx related data */ > >> >> +static int mobiveil_pcie_intx_map(struct irq_domain *domain, > >> >> unsigned int irq, > >> >> + irq_hw_number_t hwirq) > >> >> +{ > >> >> + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq); > >> >> + irq_set_chip_data(irq, domain->host_data); > >> >> + return 0; > >> >> +} > >> >> + > >> >> +/* INTx domain opeartions structure */ > >> >> +static const struct irq_domain_ops intx_domain_ops = { > >> >> + .map = mobiveil_pcie_intx_map, > >> >> +}; > >> >> + > >> >> +static void mobiveil_pcie_destroy_msi(unsigned int irq) > >> >> +{ > >> >> + struct msi_desc *msi; > >> >> + struct mobiveil_pcie *pcie; > >> >> + > >> >> + if (!test_bit(irq, msi_irq_in_use)) { > >> >> + msi = irq_get_msi_desc(irq); > >> >> + pcie = msi_desc_to_pci_sysdata(msi); > >> >> + dev_info(&pcie->pdev->dev, > >> >> + "Trying to free unused MSI#%d\n", irq); > >> >> + } else { > >> >> + clear_bit(irq, msi_irq_in_use); > >> >> + } > >> >> +} > >> >> + > >> >> +static int mobiveil_pcie_assign_msi(struct mobiveil_pcie *pcie) > >> >> +{ > >> >> + int pos; > >> >> + > >> >> + pos = find_first_zero_bit(msi_irq_in_use, PCI_NUM_MSI); > >> >> + if (pos < PCI_NUM_MSI) > >> >> + set_bit(pos, msi_irq_in_use); > >> >> + else > >> >> + return -ENOSPC; > >> >> + > >> >> + return pos; > >> >> +} > >> >> + > >> >> +static void mobiveil_msi_teardown_irq(struct msi_controller *chip, > >> >> + unsigned int irq) > >> >> +{ > >> >> + mobiveil_pcie_destroy_msi(irq); > >> >> + irq_dispose_mapping(irq); > >> >> +} > >> >> + > >> >> +static int mobiveil_pcie_msi_setup_irq(struct msi_controller *chip, > >> >> + struct pci_dev *pdev, > >> >> + struct msi_desc *desc) > >> >> +{ > >> >> + int hwirq; > >> >> + unsigned int irq; > >> >> + struct msi_msg msg; > >> >> + phys_addr_t msg_addr; > >> >> + struct mobiveil_pcie *pcie = pdev->bus->sysdata; > >> >> + > >> >> + hwirq = mobiveil_pcie_assign_msi(pcie); > >> >> + if (hwirq < 0) > >> >> + return -EINVAL; > >> >> + > >> >> + irq = irq_create_mapping(pcie->irq_domain, hwirq); > >> >> + if (!irq) > >> >> + return -EINVAL; > >> >> + > >> >> + irq_set_msi_desc(irq, desc); > >> >> + > >> >> + msg_addr = > >> >> + virt_to_phys((void *)pcie->msi_pages + (hwirq * sizeof(int))); > >> >> + > >> >> + msg.address_hi = upper_32_bits(msg_addr); > >> >> + msg.address_lo = lower_32_bits(msg_addr); > >> >> + msg.data = irq; > >> >> + > >> >> + pci_write_msi_msg(irq, &msg); > >> >> + > >> >> + return 0; > >> >> +} > >> >> + > >> >> +static struct msi_controller mobiveil_pcie_msi_chip = { > >> >> + .setup_irq = mobiveil_pcie_msi_setup_irq, > >> >> + .teardown_irq = mobiveil_msi_teardown_irq, > >> >> +}; > >> >> + > >> >> +static struct irq_chip mobiveil_msi_irq_chip = { > >> >> + .name = "Mobiveil PCIe MSI", > >> >> + .irq_enable = pci_msi_unmask_irq, > >> >> + .irq_disable = pci_msi_mask_irq, > >> >> + .irq_mask = pci_msi_mask_irq, > >> >> + .irq_unmask = pci_msi_unmask_irq, > >> >> +}; > >> >> + > >> >> +static int mobiveil_pcie_msi_map(struct irq_domain *domain, > >> >> unsigned int irq, > >> >> + irq_hw_number_t hwirq) > >> >> +{ > >> >> + irq_set_chip_and_handler(irq, &mobiveil_msi_irq_chip, > >> >> + handle_simple_irq); > >> >> + irq_set_chip_data(irq, domain->host_data); > >> >> + > >> >> + return 0; > >> >> +} > >> >> + > >> >> +static const struct irq_domain_ops msi_domain_ops = { > >> >> + .map = mobiveil_pcie_msi_map, > >> >> +}; > >> >> + > >> >> +static void mobiveil_pcie_enable_msi(struct mobiveil_pcie *pcie) > >> >> +{ > >> >> + phys_addr_t msg_addr; > >> >> + > >> >> + pcie->msi_pages = (void *)__get_free_pages(GFP_DMA, 0); > >> >> + msg_addr = virt_to_phys((void *)pcie->msi_pages); > >> >> + pcie->msi_pages_phys = (void *)msg_addr; > >> >> + > >> >> + writel_relaxed(lower_32_bits(msg_addr), > >> >> + pcie->apb_csr_base + MSI_BASE_LO_OFFSET); > >> >> + writel_relaxed(upper_32_bits(msg_addr), > >> >> + pcie->apb_csr_base + MSI_BASE_HI_OFFSET); > >> >> + writel_relaxed(4096, pcie->apb_csr_base + MSI_SIZE_OFFSET); > >> >> + writel_relaxed(1 << MSI_ENABLE_SHIFT, > >> >> + pcie->apb_csr_base + MSI_ENABLE_OFFSET); > >> >> +} > >> >> + > >> >> +static int mobiveil_pcie_init_irq_domain(struct mobiveil_pcie *pcie) > >> >> +{ > >> >> + struct device *dev = &pcie->pdev->dev; > >> >> + struct device_node *node = dev->of_node; > >> >> + > >> >> + /* Setup INTx */ > >> >> + pcie->irq_domain = > >> >> + irq_domain_add_linear(node, PCI_NUM_INTX + 1, &intx_domain_ops, > >> >> + pcie); > >> >> + > >> >> + if (!pcie->irq_domain) { > >> >> + dev_err(dev, "Failed to get a INTx IRQ domain\n"); > >> >> + return -ENOMEM; > >> >> + } > >> >> + /* Setup MSI */ > >> >> + if (IS_ENABLED(CONFIG_PCI_MSI)) { > >> >> + pcie->irq_domain = > >> >> + irq_domain_add_linear(node, > >> >> + PCI_NUM_MSI, > >> >> + &msi_domain_ops, > >> >> + &mobiveil_pcie_msi_chip); > >> >> + if (!pcie->irq_domain) { > >> >> + dev_err(dev, "Failed to get a MSI IRQ domain\n"); > >> >> + return PTR_ERR(pcie->irq_domain); > >> >> + } > >> >> + > >> >> + mobiveil_pcie_enable_msi(pcie); > >> >> + } > >> >> + return 0; > >> >> +} > >> >> + > >> >> +static int mobiveil_pcie_probe(struct platform_device *pdev) > >> >> +{ > >> >> + struct mobiveil_pcie *pcie; > >> >> + struct pci_bus *bus; > >> >> + struct pci_bus *child; > >> >> + int ret; > >> >> + > >> >> + /* allocate the PCIe port */ > >> >> + pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL); > >> >> + if (!pcie) > >> >> + return -ENOMEM; > >> >> + > >> >> + pcie->pdev = pdev; > >> >> + > >> >> + /* parse the device tree */ > >> >> + ret = mobiveil_pcie_parse_dt(pcie); > >> >> + if (ret) { > >> >> + dev_err(&pdev->dev, "Parsing DT failed, ret: %x\n", ret); > >> >> + return ret; > >> >> + } > >> >> + > >> >> + /* setup the PCIe slot link power*/ > >> >> + mobiveil_bringup_link(pcie); > >> >> + > >> >> + /* > >> >> + * configure all inbound and outbound windows and prepare the RC for > >> >> + * config access > >> >> + */ > >> >> + mobiveil_setup_config_access(pcie); > >> >> + > >> >> + /* fixup for PCIe class register */ > >> >> + csr_writel(pcie, 0x060402AB, PAB_INTP_AXI_PIO_CLASS); > >> >> + > >> >> + /* initialize the IRQ domains */ > >> >> + ret = mobiveil_pcie_init_irq_domain(pcie); > >> >> + if (ret) { > >> >> + dev_err(&pdev->dev, "Failed creating IRQ Domain\n"); > >> >> + return ret; > >> >> + } > >> >> + > >> >> + /* create the PCIe root bus */ > >> >> + bus = > >> >> + pci_create_root_bus(&pdev->dev, 0, > >> >> + &mobiveil_pcie_ops, pcie, &pcie->resources); > >> >> + if (!bus) > >> >> + return -ENOMEM; > >> >> + > >> >> + /* setup MSI, if enabled */ > >> >> + if (IS_ENABLED(CONFIG_PCI_MSI)) { > >> >> + mobiveil_pcie_msi_chip.dev = &pcie->pdev->dev; > >> >> + bus->msi = &mobiveil_pcie_msi_chip; > >> >> + } > >> >> + > >> >> + /* setup the kernel resources for the newly added PCIe root bus */ > >> >> + pci_scan_child_bus(bus); > >> >> + pci_assign_unassigned_bus_resources(bus); > >> >> + > >> >> + list_for_each_entry(child, &bus->children, node) > >> >> + pcie_bus_configure_settings(child); > >> >> + > >> >> + pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); > >> >> + pci_bus_add_devices(bus); > >> >> + platform_set_drvdata(pdev, pcie); > >> >> + > >> >> + return ret; > >> >> +} > >> >> + > >> >> +static const struct of_device_id mobiveil_pcie_of_match[] = { > >> >> + {.compatible = "mbvl,axi-pcie-host-1.00",}, > >> >> + {}, > >> >> +}; > >> >> + > >> >> +MODULE_DEVICE_TABLE(of, mobiveil_pcie_of_match); > >> >> + > >> >> +static struct platform_driver mobiveil_pcie_driver = { > >> >> + .probe = mobiveil_pcie_probe, > >> >> + .driver = { > >> >> + .name = "mobiveil-pcie", > >> >> + .of_match_table = mobiveil_pcie_of_match, > >> >> + .suppress_bind_attrs = true, > >> >> + }, > >> >> +}; > >> >> + > >> >> +builtin_platform_driver(mobiveil_pcie_driver); > >> >> + > >> >> +MODULE_LICENSE("GPL v2"); > >> >> +MODULE_DESCRIPTION("Mobiveil PCIe host controller driver"); > >> >> +MODULE_AUTHOR("Subrahmanya Lingappa <l.subrahmanya@xxxxxxxxxxxxxx>"); > >> >> -- > >> >> 1.8.3.1 > >> > >> Thanks.
