On Thu, Nov 30, 2017 at 12:43:20PM +0530, Kishon Vijay Abraham I wrote:
[...]
> >> For linux-next, I applied this series on top of Kishon's patch
> >> ("PCI: endpoint: Use EPC's device in dma_alloc_coherent/dma_free_coherent")
> >> otherwise dma_alloc_coherent() fails when called by pci_epf_alloc_space().
> >>
> >> Also, I patched drivers/Makefile rather than drivers/pci/Makefile to make
> >> the drivers/pci/cadence/pcie-cadence-ep.o linked after
>
> The reason to patch drivers/Makefile should be because pcie-cadence-ep has to
> be compiled even when CONFIG_PCI is not enabled. CONFIG_PCI enables host
> specific features and ENDPOINT shouldn't depend on CONFIG_PCI.
> >> drivers/pci/endpoint/*.o objects, otherwise the built-in pci-cadence-ep
> >> driver would be probed before the PCI endpoint framework would have been
> >> initialized, which results in a kernel crash.
> >
> > Nice :( - isn't there a way to improve this (ie probe deferral or
> > registering the EPF bus earlier) ?
> >
> >> I guess this is the reason why the "pci/dwc" line was also put in
> >> drivers/Makefile, right after the "pci/endpoint" line.
> >
> > Or probably the other way around - see commit 5e8cb4033807
> >
> > @Kishon, thoughts ?
>
> Lorenzo, ordering Makefile is one way to initialize EP core before
Makefile ordering is fragile, I do not like relying on it.
> other drivers. the other way is to have PCI EP core have a different
> initcall level.. subsys_initcall??
Yes, registering the bus at eg postcore_initcall() as PCI does should do
(if that's the problem this is solving) but still, the code must not
crash if the ordering is not correct, we have to fix this regardless.
I would appreciate if Cyrille can debug the cause of the kernel crash
so that we can fix it in the longer term.
Thanks,
Lorenzo
