Re: [PATCH V2 1/5] PCI: rcar: Poll more often in rcar_pcie_wait_for_dl()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 10, 2017 at 10:58:39PM +0100, Marek Vasut wrote:
> The data link active signal usually takes ~20 uSec to be asserted,
> poll the bit more often to avoid useless delays in this function.
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Cc: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
> Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx

Acked-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>

> ---
> V2: New patch
> ---
>  drivers/pci/host/pcie-rcar.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> index e00f865952d5..351e1276b90a 100644
> --- a/drivers/pci/host/pcie-rcar.c
> +++ b/drivers/pci/host/pcie-rcar.c
> @@ -531,13 +531,13 @@ static void phy_write_reg(struct rcar_pcie *pcie,
>  
>  static int rcar_pcie_wait_for_dl(struct rcar_pcie *pcie)
>  {
> -	unsigned int timeout = 10;
> +	unsigned int timeout = 10000;
>  
>  	while (timeout--) {
>  		if ((rcar_pci_read_reg(pcie, PCIETSTR) & DATA_LINK_ACTIVE))
>  			return 0;
>  
> -		msleep(5);
> +		udelay(5);
>  	}
>  
>  	return -ETIMEDOUT;
> -- 
> 2.11.0
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux