On Tue, Oct 24, 2017 at 01:04:26PM -0700, Jeff Kirsher wrote:
> From: Liang-Min Wang <liang-min.wang@xxxxxxxxx>
>
> When a SR-IOV supported device is bound with vfio-pci, the driver
> could not create SR-IOV instance through /sys/bus/pci/devices/...
> /sriov_numvfs. This patch re-activates this capability for a PCIe
> device that supports SR-IOV and is bound with vfio-pci.ko.
>
> Signed-off-by: Liang-Min Wang <liang-min.wang@xxxxxxxxx>
Dropping this for now, given Alex W's issues. Please address his
concerns and repost as needed.
> ---
> drivers/vfio/pci/vfio_pci.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
> index f041b1a6cf66..8fbd362607e1 100644
> --- a/drivers/vfio/pci/vfio_pci.c
> +++ b/drivers/vfio/pci/vfio_pci.c
> @@ -1256,6 +1256,7 @@ static void vfio_pci_remove(struct pci_dev *pdev)
> if (!vdev)
> return;
>
> + pci_disable_sriov(pdev);
> vfio_iommu_group_put(pdev->dev.iommu_group, &pdev->dev);
> kfree(vdev->region);
> kfree(vdev);
> @@ -1303,12 +1304,23 @@ static const struct pci_error_handlers vfio_err_handlers = {
> .error_detected = vfio_pci_aer_err_detected,
> };
>
> +static int vfio_sriov_configure(struct pci_dev *pdev, int num_vfs)
> +{
> + if (!num_vfs) {
> + pci_disable_sriov(pdev);
> + return 0;
> + }
> +
> + return pci_enable_sriov(pdev, num_vfs);
> +}
> +
> static struct pci_driver vfio_pci_driver = {
> .name = "vfio-pci",
> .id_table = NULL, /* only dynamic ids */
> .probe = vfio_pci_probe,
> .remove = vfio_pci_remove,
> .err_handler = &vfio_err_handlers,
> + .sriov_configure = vfio_sriov_configure,
> };
>
> struct vfio_devices {
> --
> 2.14.2
>
