RE: [RFCv2 PATCH 14/36] iommu/arm-smmu-v3: Add support for Substream IDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Jean-Philippe Brucker [mailto:Jean-Philippe.Brucker@xxxxxxx]
> Sent: Thursday, November 02, 2017 3:52 PM
> To: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@xxxxxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; linux-
> acpi@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; iommu@lists.linux-
> foundation.org; Mark Rutland <Mark.Rutland@xxxxxxx>; xieyisheng (A)
> <xieyisheng1@xxxxxxxxxx>; Gabriele Paoloni
> <gabriele.paoloni@xxxxxxxxxx>; Catalin Marinas
> <Catalin.Marinas@xxxxxxx>; Will Deacon <Will.Deacon@xxxxxxx>;
> okaya@xxxxxxxxxxxxxx; yi.l.liu@xxxxxxxxx; Lorenzo Pieralisi
> <Lorenzo.Pieralisi@xxxxxxx>; ashok.raj@xxxxxxxxx; tn@xxxxxxxxxxxx;
> joro@xxxxxxxxxx; rfranz@xxxxxxxxxx; lenb@xxxxxxxxxx;
> jacob.jun.pan@xxxxxxxxxxxxxxx; alex.williamson@xxxxxxxxxx;
> robh+dt@xxxxxxxxxx; Leizhen (ThunderTown) <thunder.leizhen@xxxxxxxxxx>;
> bhelgaas@xxxxxxxxxx; dwmw2@xxxxxxxxxxxxx; liubo (CU)
> <liubo95@xxxxxxxxxx>; rjw@xxxxxxxxxxxxx; robdclark@xxxxxxxxx;
> hanjun.guo@xxxxxxxxxx; Sudeep Holla <Sudeep.Holla@xxxxxxx>; Robin
> Murphy <Robin.Murphy@xxxxxxx>; nwatters@xxxxxxxxxxxxxx; Linuxarm
> <linuxarm@xxxxxxxxxx>
> Subject: Re: [RFCv2 PATCH 14/36] iommu/arm-smmu-v3: Add support for
> Substream IDs
> 
> Hi Shameer,
> 
> On Thu, Nov 02, 2017 at 12:49:32PM +0000, Shameerali Kolothum Thodi wrote:
> > We had a go with this series on HiSIlicon D05 platform which doesn't have
> > support for ssids/ATS/PRI, to make sure it generally works.
> >
> > But observed the below crash on boot,
> >
> > [   16.009084] WARNING: CPU: 59 PID: 391 at mm/page_alloc.c:3883
> __alloc_pages_nodemask+0x19c/0xc48
> > [   16.026797] Modules linked in:
> > [   16.032944] CPU: 59 PID: 391 Comm: kworker/59:1 Not tainted 4.14.0-rc1-
> 159539-ge42aca3 #236
> > [...]
> > [   16.068206] Workqueue: events deferred_probe_work_func
> > [   16.078557] task: ffff8017d38a0000 task.stack: ffff00000b198000
> > [   16.090486] PC is at __alloc_pages_nodemask+0x19c/0xc48
> > [   16.101013] LR is at __alloc_pages_nodemask+0xe0/0xc48
> > [   16.469220] [<ffff000008186b94>] __alloc_pages_nodemask+0x19c/0xc48
> > [   16.481854] [<ffff0000081d65b0>] alloc_pages_current+0x80/0xcc
> > [   16.493607] [<ffff000008182be8>] __get_free_pages+0xc/0x38
> > [   16.504661] [<ffff0000083c4d58>] swiotlb_alloc_coherent+0x64/0x190
> > [   16.517117] [<ffff00000809824c>] __dma_alloc+0x110/0x204
> > [   16.527820] [<ffff00000858e850>] dmam_alloc_coherent+0x88/0xf0
> > [   16.539575] [<ffff000008568884>]
> arm_smmu_domain_finalise_s1+0x60/0x248
> > [   16.552909] [<ffff00000856c104>] arm_smmu_attach_dev+0x264/0x300
> > [   16.565013] [<ffff00000855d40c>] __iommu_attach_device+0x48/0x5c
> > [   16.577117] [<ffff00000855e698>] iommu_group_add_device+0x144/0x3a4
> > [   16.589746] [<ffff00000855ed18>] iommu_group_get_for_dev+0x70/0xf8
> > [   16.602201] [<ffff00000856a314>] arm_smmu_add_device+0x1a4/0x418
> > [   16.614308] [<ffff00000849dfcc>] iort_iommu_configure+0xf0/0x16c
> > [   16.626416] [<ffff000008468c50>] acpi_dma_configure+0x30/0x70
> > [   16.637994] [<ffff00000858f00c>] dma_configure+0xa8/0xd4
> > [   16.648695] [<ffff00000857706c>] driver_probe_device+0x1a4/0x2dc
> > [   16.673081] [<ffff0000085752c8>] bus_for_each_drv+0x54/0x94
> > [   16.684307] [<ffff000008576db0>] __device_attach+0xc4/0x12c
> > [   16.695533] [<ffff000008577350>] device_initial_probe+0x10/0x18
> > [   16.707462] [<ffff0000085762b4>] bus_probe_device+0x90/0x98
> >
> > After a bit of debug it looks like on platforms where ssid is not supported,
> > s1_cfg.num_contexts is set to zero and it eventually results in this crash
> > in,
> > arm_smmu_domain_finalise_s1() -->arm_smmu_alloc_cd_tables()-->
> > arm_smmu_alloc_cd_leaf_table() as num_leaf_entries is zero.
> >
> > With the below fix, it works on D05 now,
> >
> > diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> > index 8ad90e2..51f5821 100644
> > --- a/drivers/iommu/arm-smmu-v3.c
> > +++ b/drivers/iommu/arm-smmu-v3.c
> > @@ -2433,7 +2433,10 @@ static int arm_smmu_domain_finalise(struct
> iommu_domain *domain,
> >                         domain->min_pasid = 1;
> >                         domain->max_pasid = master->num_ssids - 1;
> >                         smmu_domain->s1_cfg.num_contexts = master->num_ssids;
> > +               } else {
> > +                       smmu_domain->s1_cfg.num_contexts = 1;
> >                 }
> > +
> >                 smmu_domain->s1_cfg.can_stall = master->ste.can_stall;
> >                 break;
> >         case ARM_SMMU_DOMAIN_NESTED:
> >
> >
> > I am not sure this is right place do this. Please take a look.
> 
> Thanks for testing the series and reporting the bug. I added the
> following patch to branch svm/current, does it work for you?

Yes, it does.

Thanks,
Shameer
 
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index 42c8378624ed..edda466adc81 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -3169,9 +3169,7 @@ static int arm_smmu_add_device(struct device *dev)
>                 }
>         }
> 
> -       if (smmu->ssid_bits)
> -               master->num_ssids = 1 << min(smmu->ssid_bits,
> -                                            fwspec->num_pasid_bits);
> +       master->num_ssids = 1 << min(smmu->ssid_bits, fwspec-
> >num_pasid_bits);
> 
>         if (fwspec->can_stall && smmu->features & ARM_SMMU_FEAT_STALLS) {
>                 master->can_fault = true;





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux