Re: [PATCH v2 06/17] PCI: designware-ep: Add generic function for raising MSI irq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/31/2017 07:22 AM, Kishon Vijay Abraham I wrote:

(snip)

>> --- a/drivers/pci/dwc/pcie-designware.h
>> +++ b/drivers/pci/dwc/pcie-designware.h
>> @@ -106,6 +106,8 @@
>>  #define MSI_CAP_MME_MASK		(7 << MSI_CAP_MME_SHIFT)
>>  #define MSI_MESSAGE_ADDR_L32		0x54
>>  #define MSI_MESSAGE_ADDR_U32		0x58
>> +#define MSI_MESSAGE_DATA_32		0x58
> 
> Does ADDR_U32 and DATA_32 share the same offset? (in dra7xx MSI_64_EN is
> hardwired to 1 so I can't know this for sure.)
> 

Hello Kishon,

Yes, they do.
The information in the register depends on if the bit MSI_64_EN
is set or not.

There exists defines for this also in the generic uapi header pci_regs.h,
however, utilizing that header would be a separate patch.

$ grep -E "MSI_DATA|MSI_MASK" include/uapi/linux/pci_regs.h
#define PCI_MSI_DATA_32         8       /* 16 bits of data for 32-bit devices */
#define PCI_MSI_MASK_32         12      /* Mask bits register for 32-bit devices */
#define PCI_MSI_DATA_64         12      /* 16 bits of data for 64-bit devices */
#define PCI_MSI_MASK_64         16      /* Mask bits register for 64-bit devices */

Regards,
Niklas



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux