[PATCH V3 00/12] Enable Tegra root port features and apply SW fixups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



These series of patches does the following things,
- Deasserting pcie_xrst after programming root port to make sure that
  register programming is reflected during LTSSM
- Apply REFCLK pad settings to make sure P2P amplitude requirement is met
- Enable Gen2 link speed
- Advertise AER capability
- Program UPHY electrical settings for meeting eye diagram requirements
- Bunch of SW fixups explained in their respective commit log

Testing done on Tegra124, 210 and 186:
- PCIe link up, config read, BAR read and basic functionality of Ethernet
  card
- Link speed switch to Gen2 after link retrain
- Link speed stays in Gen1 after retrain if end point is only Gen1 capable
- Simulated AER errors and verified dmesg logs for them
- Rest of the programming is verified by dumping the registers after PCIe
link up

Manikanta Maddireddy (12):
  PCI: tegra: Start LTSSM after programming root port
  PCI: tegra: Move REFCLK pad settings out of phy_power_on()
  PCI: tegra: Retrain link for Gen2 speed
  PCI: tegra: Advertise AER capability
  PCI: tegra: Program UPHY electrical settings in Tegra210
  PCI: tegra: Enable opportunistic update FC and ACK
  PCI: tegra: Disable AFI dynamic clock gating
  PCI: tegra: Wait for DLLP to finish before entering L1 or L2
  PCI: tegra: Enable PCIe xclk clock clamping
  PCI: tegra: Add SW fixup for RAW violations
  PCI: tegra: Increase the deskew retry time
  PCI: tegra: Update flow control threshold in Tegra210

 drivers/pci/host/pci-tegra.c | 306 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 288 insertions(+), 18 deletions(-)

-- 
2.1.4




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux