The ARTPEC-6 SoC and the ARTPEC-7 SoC are very similar. Unfortunately, some fields in the PCIECFG and PCIESTAT register have changed. Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- V2: * Split out the DT binding change to a self contained patch. * Added Rob's ack (from V1). No change to this file since V1. Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt index 33eef7ae5a23..979dc7b6cfe8 100644 --- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt +++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt @@ -6,6 +6,8 @@ and thus inherits all the common properties defined in designware-pcie.txt. Required properties: - compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode; "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode; + "axis,artpec7-pcie", "snps,dw-pcie" for ARTPEC-7 in RC mode; + "axis,artpec7-pcie-ep", "snps,dw-pcie" for ARTPEC-7 in EP mode; - reg: base addresses and lengths of the PCIe controller (DBI), the PHY controller, and configuration address space. - reg-names: Must include the following entries: -- 2.14.2
