Default root port settings hide AER capability. This patch enables the
advertisement of AER capability by root port.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
---
V2:
* no change in this patch
drivers/pci/host/pci-tegra.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 9f6d331c3571..2a7665a9ce5b 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -187,6 +187,9 @@
#define RP_VEND_XP 0x00000f00
#define RP_VEND_XP_DL_UP (1 << 30)
+#define RP_VEND_CTL1 0xf48
+#define RP_VEND_CTL1_ERPT (1 << 13)
+
#define RP_VEND_CTL2 0x00000fa8
#define RP_VEND_CTL2_PCA_ENABLE (1 << 7)
@@ -2055,6 +2058,16 @@ static void tegra_pcie_apply_pad_settings(struct tegra_pcie *pcie)
pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1);
}
+static void tegra_pcie_enable_rp_features(struct tegra_pcie_port *port)
+{
+ unsigned long value;
+
+ /* Enable AER capability */
+ value = readl(port->base + RP_VEND_CTL1);
+ value |= RP_VEND_CTL1_ERPT;
+ writel(value, port->base + RP_VEND_CTL1);
+}
+
/*
* FIXME: If there are no PCIe cards attached, then calling this function
* can result in the increase of the bootup time as there are big timeout
@@ -2119,6 +2132,7 @@ static void tegra_pcie_enable_ports(struct tegra_pcie *pcie)
port->index, port->lanes);
tegra_pcie_port_enable(port);
+ tegra_pcie_enable_rp_features(port);
}
/* take the PCIe interface module out of reset */
--
2.1.4
