Hi Brian,
On 10/24/2017 07:02 AM, Brian Norris wrote:
+ PM folks
Hi Jeffy,
It's probably good if you send the whole thing to linux-pm@ in the
future, if you're really trying to implement generic PCI/PM for device
tree systems.
ok
On Thu, Oct 19, 2017 at 07:10:05PM +0800, Jeffy Chen wrote:
Add support for PCIE_WAKE pin.
This is kind of an important change, so it feels like you should
document it a little more thoroughly than this. Particularly, I have a
few questions below, and it seems like some of these questions should be
acknowledged up front. e.g., why does this look so different than the
ACPI hooks?
sure, will do in next version.
Signed-off-by: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
---
Changes in v7:
Move PCIE_WAKE handling into pci core.
Changes in v6:
Fix device_init_wake error handling, and add some comments.
Changes in v5:
Rebase
Changes in v3:
Fix error handling
Changes in v2:
Use dev_pm_set_dedicated_wake_irq
-- Suggested by Brian Norris <briannorris@xxxxxxxxxxxx>
drivers/pci/pci.c | 34 ++++++++++++++++++++++++++++++++--
drivers/pci/probe.c | 32 ++++++++++++++++++++++++++++----
drivers/pci/remove.c | 9 +++++++++
3 files changed, 69 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index f0d68066c726..49080a10bdf0 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -603,10 +603,40 @@ static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev)
pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR;
}
+static int pci_dev_check_wakeup(struct pci_dev *dev, void *data)
+{
+ bool *wakeup = data;
+
+ if (device_may_wakeup(&dev->dev))
+ *wakeup = true;
+
+ return *wakeup;
+}
+
static inline int platform_pci_set_wakeup(struct pci_dev *dev, bool enable)
{
- return pci_platform_pm ?
- pci_platform_pm->set_wakeup(dev, enable) : -ENODEV;
+ struct pci_dev *parent = dev;
+ struct pci_bus *bus;
+ bool wakeup = false;
It feels like you're implementing a set of pci_platform_pm_ops, except
you're not actually implementing them. It almost seems like we should
have a drivers/pci/pci-of.c to do this. But that brings up a few
questions....
i saw the drivers might call set_wakeup() in suspend/resume/shutdown to
configure the wakeup ability, maybe we can call
device_set_wakeup_enable() here as a common part of set_wakeup()?
static inline int platform_pci_set_wakeup(struct pci_dev *dev, bool
enable) {
device_set_wakeup_enable()
...
return pci_platform_pm ? pci_platform_pm->set_wakeup(dev, enable) :
-ENODEV;
+
+ if (pci_platform_pm)
So, if somebody already registered ops, then you won't follow the "OF"
route? That means this all breaks as soon as a kernel has both
CONFIG_ACPI and CONFIG_OF enabled. This is possible on at least ARM64,
which 'select's OF and may also be built/run with CONFIG_ACPI.
And that conflict is the same if we try to register pci_platform_pm_ops
for OF systems -- it'll be a race over who sets them up first (or
rather, last).
Also, what happens on !ACPI && !OF? Or if the device tree did not
contain a "wakeup" definition? You're now implementing a default path
that doesn't make much sense IMO; you may claim wakeup capability
without actually having set it up somewhere.
maybe we can use device_set_wakeup_enable(), which will check the setup
before setting?
I think you could use some more comments, and (again) a real commit
message.
ok, will do.
+ return pci_platform_pm->set_wakeup(dev, enable);
+
+ device_set_wakeup_capable(&dev->dev, enable);
Why are you setting that here? This function should just be telling the
lower layers to enable the physical WAKE# ability. In our case, it just
means configuring the WAKE# interrupt for wakeup -- or, since you've
used dev_pm_set_dedicated_wake_irq() which handles most of this
automatically...do you need this at all? It seems like you should
*either* implement these callbacks to manually manage the wakeup IRQ or
else use the dedicated wakeirq infrastructure -- not both.
And even if you need this, I don't think you need to do this many times;
you should only need to set up the capabilities once, when you first set
up the device.
And BTW, the description for the set_wakeup() callback says:
* @set_wakeup: enables/disables wakeup capability for the device
I *don't* think that means "capability" as in the device framework's
view of "wakeup capable"; I think it means capability as in the physical
ability (a la, enable_irq_wake() or similar).
i was thinking maybe we should disable the wakeup if all children
request set_wakeup(false)?
and it seems like the dedicated wakeirq can be disabled by:
1/ dev_pm_clear_wake_irq(), then we may need to store the irq somewhere
to set it up again in the future?
2/ let device_may_wakeup return false:
void dev_pm_arm_wake_irq(struct wake_irq *wirq)
{
if (!wirq)
return;
if (device_may_wakeup(wirq->dev)) {
if (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED)
enable_irq(wirq->irq);
enable_irq_wake(wirq->irq);
}
+
+ while ((parent = pci_upstream_bridge(parent)))
+ bus = parent->bus;
+
+ if (!bus || !pci_is_root_bus(bus) || !bus->bridge->parent)
+ return -ENODEV;
+
+ pci_walk_bus(bus, pci_dev_check_wakeup, &wakeup);
+ device_set_wakeup_capable(bus->bridge->parent, wakeup);
What happens to any intermediate buses? You haven't marked them as
wakeup-capable. Should you?
And the more fundamental question here is: is this a per-device
configuration or a per-root-port configuration? The APIs here are
modeled after ACPI, where I guess this is a per-device thing. The PCIe
spec doesn't exactly specify how many WAKE# pins you need, though it
seems to say
(a) it's all-or-nothing (if one device uses it, all wakeup-capable EPs
should be wired up to it)
(b) it *can* be done as a single input to the system controller, since
it's an open drain signal
(c) ...but I also see now in the PCIe Card Electromechanical
specification:
"WAKE# may be bused to multiple PCI Express add-in card connectors,
forming a single input connection at the PM controller, or
individual connectors can have individual connections to the PM
controller."
So I think you're kind of going along the lines of (b) (as I suggested
to you previously), and that matches the current hardware (we only have
a single WAKE#) and proposed DT binding. But should this be set up in a
way that suits (c) too? It's hard to tell exactly what ACPI-based
systems do, since they have this abstracted behind ACPI interfaces that
seem like they *could* support per-device or per-bridge type of hookups.
maybe we can try to setup wake irq for each pci devices which have it in
the dts, then in the set_wakeup(), try to find the parents(or itself)
who has wake irq, and enable/disable them(maybe also need a refcount)?
Bjorn, any thoughts? This seems like a halfway attempt in between two
different designs, and I'm not really sure which one makes more sense.
Brian
+
+ dev_dbg(bus->bridge->parent,
+ "Wakeup %s\n", wakeup ? "enabled" : "disabled");
+
+ return 0;
}
static inline bool platform_pci_need_resume(struct pci_dev *dev)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index cdc2f83c11c5..fd43ca832665 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -7,6 +7,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/of_device.h>
+#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/pci_hotplug.h>
#include <linux/slab.h>
@@ -17,6 +18,7 @@
#include <linux/acpi.h>
#include <linux/irqdomain.h>
#include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
#include "pci.h"
#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
@@ -756,11 +758,28 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge)
struct resource *res;
char addr[64], *fmt;
const char *name;
- int err;
+ int err, irq;
+
+ if (IS_ENABLED(CONFIG_OF) && parent && parent->of_node) {
+ irq = of_irq_get_byname(parent->of_node, "wakeup");
+ if (irq == -EPROBE_DEFER)
+ return irq;
+ if (irq > 0) {
+ device_init_wakeup(parent, true);
+ err = dev_pm_set_dedicated_wake_irq(parent, irq);
+ if (err) {
+ dev_err(parent, "Failed to setup wakeup IRQ\n");
+ goto deinit_wakeup;
+ }
+ dev_info(parent, "Wakeup enabled with IRQ %d\n", irq);
+ }
+ }
bus = pci_alloc_bus(NULL);
- if (!bus)
- return -ENOMEM;
+ if (!bus) {
+ err = -ENOMEM;
+ goto clear_wake_irq;
+ }
bridge->bus = bus;
@@ -856,9 +875,14 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge)
unregister:
put_device(&bridge->dev);
device_unregister(&bridge->dev);
-
free:
kfree(bus);
+clear_wake_irq:
+ if (parent)
+ dev_pm_clear_wake_irq(parent);
+deinit_wakeup:
+ if (parent)
+ device_init_wakeup(parent, false);
return err;
}
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 73a03d382590..cb7a326429e1 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -1,6 +1,7 @@
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/pci-aspm.h>
+#include <linux/pm_wakeirq.h>
#include "pci.h"
static void pci_free_resources(struct pci_dev *dev)
@@ -131,17 +132,25 @@ void pci_stop_root_bus(struct pci_bus *bus)
{
struct pci_dev *child, *tmp;
struct pci_host_bridge *host_bridge;
+ struct device *parent;
if (!pci_is_root_bus(bus))
return;
host_bridge = to_pci_host_bridge(bus->bridge);
+ parent = host_bridge->dev.parent;
+
list_for_each_entry_safe_reverse(child, tmp,
&bus->devices, bus_list)
pci_stop_bus_device(child);
/* stop the host bridge */
device_release_driver(&host_bridge->dev);
+
+ if (parent) {
+ dev_pm_clear_wake_irq(parent);
+ device_init_wakeup(parent, false);
+ }
}
EXPORT_SYMBOL_GPL(pci_stop_root_bus);
--
2.11.0
