Re: [PATCH] dt-bindings: PCI: rcar: Correct example to match reality

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 11, 2017 at 03:50:13PM +0200, Geert Uytterhoeven wrote:
> Correct the USB subnodes in the example, cfr. commit f7d569c1e6a6fa73
> ("ARM: dts: r8a779x: Fix PCI bus dtc warnings"):
>   1. Drop the bogus 'device_type = "pci"' properties,
>   2. Correct the unit addresses.
> 
> Update other bits in the example to match real use:
>   1. Rename the USB subnodes from "pci" to "usb",
>   2. Update the "phys" property.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Applied with acks from Sergei and Rob to pci/host-rcar for v4.15, thanks!

> ---
>  Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
> index 3d038638612b8ec2..9fe7e12a7bf37b7c 100644
> --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
> +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
> @@ -60,17 +60,15 @@ Example SoC configuration:
>  				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
>  				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
>  
> -		pci@0,1 {
> +		usb@1,0 {
>  			reg = <0x800 0 0 0 0>;
> -			device_type = "pci";
> -			phys = <&usbphy 0 0>;
> +			phys = <&usb0 0>;
>  			phy-names = "usb";
>  		};
>  
> -		pci@0,2 {
> +		usb@2,0 {
>  			reg = <0x1000 0 0 0 0>;
> -			device_type = "pci";
> -			phys = <&usbphy 0 0>;
> +			phys = <&usb0 0>;
>  			phy-names = "usb";
>  		};
>  	};
> -- 
> 2.7.4
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux