From: Joe Perches
> Sent: 17 October 2017 07:35
> On Tue, 2017-10-17 at 11:13 +0530, Faiz Abbas wrote:
> > Enable support for printing the LTSSM link state for debugging PCI
> > when link is down.
> []
> > diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
> > index 34427a6..7b150b0 100644
> > --- a/drivers/pci/dwc/pci-dra7xx.c
> > +++ b/drivers/pci/dwc/pci-dra7xx.c
> > @@ -98,6 +98,18 @@ struct dra7xx_pcie_of_data {
> >
> > #define to_dra7xx_pcie(x) dev_get_drvdata((x)->dev)
> >
> > +static char state[][20] = {
> > + "DETECT_QUIET", "DETECT_ACT", "POLL_ACTIVE", "POLL_COMPLIANCE",
> > + "POLL_CONFIG", "PRE_DETECT_QUIET", "DETECT_WAIT", "CFG_LINKWD_START",
> > + "CFG_LINKWD_ACEPT", "CFG_LANENUM_WAIT", "CFG_LANENUM_ACEPT",
> > + "CFG_COMPLETE", "CFG_IDLE", "RCVRY_LOCK", "RCVRY_SPEED",
> > + "RCVRY_RCVRCFG", "RCVRY_IDLE", "L0", "L0S", "L123_SEND_EIDLE",
> > + "L1_IDLE", "L2_IDLE", "L2_WAKE", "DISABLED_ENTRY", "DISABLED_IDLE",
> > + "DISABLED", "LPBK_ENTRY", "LPBK_ACTIVE", "LPBK_EXIT",
> > + "LPBK_EXIT_TIMEOUT", "HOT_RESET_ENTRY", "HOT_RESET", "RCVRY_EQ0",
> > + "RCVRY_EQ1", "RCVRY_EQ2", "RCVRY_EQ3"
>
> what's wrong with using the far more typical
>
> static const char *link_state[] = {
> "DETECT_QUIET",
> ...
Or 4 aligned columns.
Better still used named initialisers:
[xxx_DETECT_QUIET] = "DETECT_QUIET",
you really don't want an 'off-by-one' in that list.
David
