Re: [PATCH 2/4] dt-bindings: PCI: dra7xx: Add properties to enable x2 lane in dra7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 10, 2017 at 03:46:04PM +0530, Kishon Vijay Abraham I wrote:
> Add syscon properties required for configuring PCIe in x2 lane mode.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
> ---
>  Documentation/devicetree/bindings/pci/ti-pci.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
> index 82cb875e4cec..455cb74a475c 100644
> --- a/Documentation/devicetree/bindings/pci/ti-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
> @@ -13,6 +13,10 @@ PCIe DesignWare Controller
>   - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
>  	       where <X> is the instance number of the pcie from the HW spec.
>   - num-lanes as specified in ../designware-pcie.txt
> + - syscon-lane-conf : phandle/offset pair. Phandle to the system control module and the
> +   register offset to specify 1 lane or 2 lane.
> + - syscon-lane-sel : phandle/offset pair. Phandle to the system control module and the
> +   register offset to specify lane selection.

Needs vendor prefixes.

Rob



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux