From: Behalf Of Niklas Cassel
> Sent: 13 October 2017 17:09
> Since it is a PCIe endpoint device, rather than the CPU, that is supposed
> to write to this location, the proper way to get the address to this this
> location is really to use the DMA API, rather than virt_to_phys.
>
> Using virt_to_phys might work on some systems, but by using the DMA API,
> we know that it will work on all systems.
>
> This is essentially the same thing as allocating a buffer in a driver,
> to which the endpoint will write to. To do this, we use the DMA API.
>
> Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx>
> ---
> drivers/pci/dwc/pcie-designware-host.c | 23 ++++++++++++++++-------
> drivers/pci/dwc/pcie-designware.h | 3 ++-
> 2 files changed, 18 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pci/dwc/pcie-designware-host.c b/drivers/pci/dwc/pcie-designware-host.c
> index 81e2157a7cfb..f6d152ea2a03 100644
> --- a/drivers/pci/dwc/pcie-designware-host.c
> +++ b/drivers/pci/dwc/pcie-designware-host.c
> @@ -83,16 +83,25 @@ irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
>
> void dw_pcie_msi_init(struct pcie_port *pp)
> {
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct device *dev = pci->dev;
> + struct page *page;
> u64 msi_target;
>
> - pp->msi_data = __get_free_pages(GFP_KERNEL, 0);
> - msi_target = virt_to_phys((void *)pp->msi_data);
> + page = alloc_page(GFP_KERNEL | GFP_DMA32);
> + pp->msi_data = dma_map_page(dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE);
Where are the matching frees?
David
> + if (dma_mapping_error(dev, pp->msi_data)) {
> + dev_err(dev, "failed to map msi data\n");
> + __free_page(page);
> + return;
> + }
> + msi_target = (u64)pp->msi_data;
>
> /* program the msi_data */
> dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4,
> - (u32)(msi_target & 0xffffffff));
> + lower_32_bits(msi_target));
> dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4,
> - (u32)(msi_target >> 32 & 0xffffffff));
> + upper_32_bits(msi_target));
> }
>
> static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
> @@ -187,10 +196,10 @@ static void dw_msi_setup_msg(struct pcie_port *pp, unsigned int irq, u32 pos)
> if (pp->ops->get_msi_addr)
> msi_target = pp->ops->get_msi_addr(pp);
> else
> - msi_target = virt_to_phys((void *)pp->msi_data);
> + msi_target = (u64)pp->msi_data;
>
> - msg.address_lo = (u32)(msi_target & 0xffffffff);
> - msg.address_hi = (u32)(msi_target >> 32 & 0xffffffff);
> + msg.address_lo = lower_32_bits(msi_target);
> + msg.address_hi = upper_32_bits(msi_target);
>
> if (pp->ops->get_msi_data)
> msg.data = pp->ops->get_msi_data(pp, pos);
> diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
> index e5d9d77b778e..547352a317f8 100644
> --- a/drivers/pci/dwc/pcie-designware.h
> +++ b/drivers/pci/dwc/pcie-designware.h
> @@ -17,6 +17,7 @@
> #include <linux/irq.h>
> #include <linux/msi.h>
> #include <linux/pci.h>
> +#include <linux/dma-mapping.h>
>
> #include <linux/pci-epc.h>
> #include <linux/pci-epf.h>
> @@ -168,7 +169,7 @@ struct pcie_port {
> const struct dw_pcie_host_ops *ops;
> int msi_irq;
> struct irq_domain *irq_domain;
> - unsigned long msi_data;
> + dma_addr_t msi_data;
> DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
> };
>
> --
> 2.11.0
