[RFC 1/3] devlink: Add config parameter get/set operations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for config parameter get/set commands. Initially used by
bnxt driver, but other drivers can use the same, or new, attributes.
The config_get() and config_set() operations operate as expected, but
note that the driver implementation of the config_set() operation can
indicate whether a restart is necessary for the setting to take
effect.

Signed-off-by: Steve Lin <steven.lin1@xxxxxxxxxxxx>
Acked-by: Andy Gospodarek <gospo@xxxxxxxxxxxx>
---
 include/net/devlink.h        |   4 +
 include/uapi/linux/devlink.h | 108 ++++++++++++++++++++++
 net/core/devlink.c           | 207 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 319 insertions(+)

diff --git a/include/net/devlink.h b/include/net/devlink.h
index b9654e1..952966c 100644
--- a/include/net/devlink.h
+++ b/include/net/devlink.h
@@ -270,6 +270,10 @@ struct devlink_ops {
 	int (*eswitch_inline_mode_set)(struct devlink *devlink, u8 inline_mode);
 	int (*eswitch_encap_mode_get)(struct devlink *devlink, u8 *p_encap_mode);
 	int (*eswitch_encap_mode_set)(struct devlink *devlink, u8 encap_mode);
+	int (*config_get)(struct devlink *devlink, enum devlink_attr attr,
+			  u32 *value);
+	int (*config_set)(struct devlink *devlink, enum devlink_attr attr,
+			  u32 value, u8 *restart_reqd);
 };
 
 static inline void *devlink_priv(struct devlink *devlink)
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index 0cbca96..e959716 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -70,6 +70,9 @@ enum devlink_command {
 	DEVLINK_CMD_DPIPE_HEADERS_GET,
 	DEVLINK_CMD_DPIPE_TABLE_COUNTERS_SET,
 
+	DEVLINK_CMD_CONFIG_GET,
+	DEVLINK_CMD_CONFIG_SET,
+
 	/* add new commands above here */
 	__DEVLINK_CMD_MAX,
 	DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1
@@ -124,6 +127,68 @@ enum devlink_eswitch_encap_mode {
 	DEVLINK_ESWITCH_ENCAP_MODE_BASIC,
 };
 
+enum devlink_dcbx_mode {
+	DEVLINK_DCBX_MODE_DISABLED,
+	DEVLINK_DCBX_MODE_IEEE,
+	DEVLINK_DCBX_MODE_CEE,
+	DEVLINK_DCBX_MODE_IEEE_CEE,
+};
+
+enum devlink_multifunc_mode {
+	DEVLINK_MULTIFUNC_MODE_ALLOWED,		/* Ext switch activates MF */
+	DEVLINK_MULTIFUNC_MODE_FORCE_SINGFUNC,
+	DEVLINK_MULTIFUNC_MODE_NPAR10,		/* NPAR 1.0 */
+	DEVLINK_MULTIFUNC_MODE_NPAR15,		/* NPAR 1.5 */
+	DEVLINK_MULTIFUNC_MODE_NPAR20,		/* NPAR 2.0 */
+};
+
+enum devlink_autoneg_protocol {
+	DEVLINK_AUTONEG_PROTOCOL_IEEE8023BY_BAM,
+	DEVLINK_AUTONEG_PROTOCOL_IEEE8023BY_CONSORTIUM,
+	DEVLINK_AUTONEG_PROTOCOL_IEEE8023BY,
+	DEVLINK_AUTONEG_PROTOCOL_BAM,		/* Broadcom Autoneg Mode */
+	DEVLINK_AUTONEG_PROTOCOL_CONSORTIUM,	/* Consortium Autoneg Mode */
+};
+
+enum devlink_pre_os_link_speed {
+	DEVLINK_PRE_OS_LINK_SPEED_AUTONEG,
+	DEVLINK_PRE_OS_LINK_SPEED_1G,
+	DEVLINK_PRE_OS_LINK_SPEED_10G,
+	DEVLINK_PRE_OS_LINK_SPEED_25G,
+	DEVLINK_PRE_OS_LINK_SPEED_40G,
+	DEVLINK_PRE_OS_LINK_SPEED_50G,
+	DEVLINK_PRE_OS_LINK_SPEED_100G,
+	DEVLINK_PRE_OS_LINK_SPEED_5G = 0xe,
+	DEVLINK_PRE_OS_LINK_SPEED_100M = 0xf,
+};
+
+enum devlink_mba_boot_type {
+	DEVLINK_MBA_BOOT_TYPE_AUTO_DETECT,
+	DEVLINK_MBA_BOOT_TYPE_BBS,		/* BIOS Boot Specification */
+	DEVLINK_MBA_BOOT_TYPE_INTR18,		/* Hook interrupt 0x18 */
+	DEVLINK_MBA_BOOT_TYPE_INTR19,		/* Hook interrupt 0x19 */
+};
+
+enum devlink_mba_setup_hot_key {
+	DEVLINK_MBA_SETUP_HOT_KEY_CTRL_S,
+	DEVLINK_MBA_SETUP_HOT_KEY_CTRL_B,
+};
+
+enum devlink_mba_boot_protocol {
+	DEVLINK_MBA_BOOT_PROTOCOL_PXE,
+	DEVLINK_MBA_BOOT_PROTOCOL_ISCSI,
+	DEVLINK_MBA_BOOT_PROTOCOL_NONE = 0x7,
+};
+
+enum devlink_mba_link_speed {
+	DEVLINK_MBA_LINK_SPEED_AUTONEG,
+	DEVLINK_MBA_LINK_SPEED_1G,
+	DEVLINK_MBA_LINK_SPEED_10G,
+	DEVLINK_MBA_LINK_SPEED_25G,
+	DEVLINK_MBA_LINK_SPEED_40G,
+	DEVLINK_MBA_LINK_SPEED_50G,
+};
+
 enum devlink_attr {
 	/* don't change the order or add anything between, this is ABI! */
 	DEVLINK_ATTR_UNSPEC,
@@ -202,6 +267,49 @@ enum devlink_attr {
 
 	DEVLINK_ATTR_ESWITCH_ENCAP_MODE,	/* u8 */
 
+	/* Configuration Parameters */
+	DEVLINK_ATTR_SRIOV_ENABLED,		/* u8 */
+	DEVLINK_ATTR_NUM_VF_PER_PF,		/* u32 */
+	DEVLINK_ATTR_MAX_NUM_PF_MSIX_VECT,	/* u32 */
+	DEVLINK_ATTR_MSIX_VECTORS_PER_VF,	/* u32 */
+	DEVLINK_ATTR_NPAR_NUM_PARTITIONS_PER_PORT,	/* u32 */
+	DEVLINK_ATTR_NPAR_BW_IN_PERCENT,	/* u8 */
+	DEVLINK_ATTR_NPAR_BW_RESERVATION,	/* u8 */
+	DEVLINK_ATTR_NPAR_BW_RESERVATION_VALID,	/* u8 */
+	DEVLINK_ATTR_NPAR_BW_LIMIT,		/* u8 */
+	DEVLINK_ATTR_NPAR_BW_LIMIT_VALID,	/* u8 */
+	DEVLINK_ATTR_DCBX_MODE,			/* u8 */
+	DEVLINK_ATTR_RDMA_ENABLED,		/* u8 */
+	DEVLINK_ATTR_MULTIFUNC_MODE,		/* u8 */
+	DEVLINK_ATTR_SECURE_NIC_ENABLED,	/* u8 */
+	DEVLINK_ATTR_IGNORE_ARI_CAPABILITY,	/* u8 */
+	DEVLINK_ATTR_LLDP_NEAREST_BRIDGE_ENABLED,	/* u8 */
+	DEVLINK_ATTR_LLDP_NEAREST_NONTPMR_BRIDGE_ENABLED,	/* u8 */
+	DEVLINK_ATTR_PME_CAPABILITY_ENABLED,	/* u8 */
+	DEVLINK_ATTR_MAGIC_PACKET_WOL_ENABLED,	/* u8 */
+	DEVLINK_ATTR_EEE_PWR_SAVE_ENABLED,	/* u8 */
+	DEVLINK_ATTR_AUTONEG_PROTOCOL,		/* u8 */
+	DEVLINK_ATTR_MEDIA_AUTO_DETECT,		/* u8 */
+	DEVLINK_ATTR_PHY_SELECT,		/* u8 */
+	DEVLINK_ATTR_PRE_OS_LINK_SPEED_D0,	/* u8 */
+	DEVLINK_ATTR_PRE_OS_LINK_SPEED_D3,	/* u8 */
+	DEVLINK_ATTR_MBA_ENABLED,		/* u8 */
+	DEVLINK_ATTR_MBA_BOOT_TYPE,		/* u8 */
+	DEVLINK_ATTR_MBA_DELAY_TIME,		/* u32 */
+	DEVLINK_ATTR_MBA_SETUP_HOT_KEY,		/* u8 */
+	DEVLINK_ATTR_MBA_HIDE_SETUP_PROMPT,	/* u8 */
+	DEVLINK_ATTR_MBA_BOOT_RETRY_COUNT,	/* u32 */
+	DEVLINK_ATTR_MBA_VLAN_ENABLED,		/* u8 */
+	DEVLINK_ATTR_MBA_VLAN_TAG,		/* u16 */
+	DEVLINK_ATTR_MBA_BOOT_PROTOCOL,		/* u8 */
+	DEVLINK_ATTR_MBA_LINK_SPEED,		/* u8 */
+
+	/* When config doesn't take effect until next reboot (config
+	 * just changed NVM which isn't read until boot, for example),
+	 * this attribute should be set by the driver.
+	 */
+	DEVLINK_ATTR_RESTART_REQUIRED,		/* u8 */
+
 	/* add new attributes above here, update the policy in devlink.c */
 
 	__DEVLINK_ATTR_MAX,
diff --git a/net/core/devlink.c b/net/core/devlink.c
index 7d430c1..701c84b 100644
--- a/net/core/devlink.c
+++ b/net/core/devlink.c
@@ -1566,6 +1566,164 @@ static int devlink_nl_cmd_eswitch_set_doit(struct sk_buff *skb,
 	return 0;
 }
 
+static const struct nla_policy devlink_nl_policy[DEVLINK_ATTR_MAX + 1];
+
+static int devlink_nl_config_fill(struct sk_buff *msg,
+				  struct devlink *devlink,
+				  enum devlink_command cmd,
+				  struct genl_info *info)
+{
+	const struct devlink_ops *ops = devlink->ops;
+	void *hdr;
+	int err;
+	enum devlink_attr attr = -1;
+	u32 value;
+	int i;
+	struct nla_policy policy;
+	u8 restart_reqd;
+
+	if (!ops->config_get)
+		return -EOPNOTSUPP;
+
+	hdr = genlmsg_put(msg, info->snd_portid, info->snd_seq,
+			  &devlink_nl_family, 0, cmd);
+	if (!hdr) {
+		err = -EMSGSIZE;
+		goto nla_msg_failure;
+	}
+
+	err = devlink_nl_put_handle(msg, devlink);
+	if (err)
+		goto nla_put_failure;
+
+	for (i = 0; i < DEVLINK_ATTR_MAX; i++)
+		if (info->attrs[i])
+			attr = i;
+
+	if (attr == -1) {
+		/* Not found - invalid/unknown attribute? */
+		err = -EINVAL;
+		goto nla_put_failure;
+	}
+
+	policy = devlink_nl_policy[attr];
+
+	if (cmd == DEVLINK_CMD_CONFIG_GET) {
+		err = ops->config_get(devlink, attr, &value);
+
+		if (err)
+			goto nla_put_failure;
+
+		switch (policy.type) {
+		case NLA_U8:
+			err = nla_put_u8(msg, attr, value);
+			break;
+		case NLA_U16:
+			err = nla_put_u16(msg, attr, value);
+			break;
+		case NLA_U32:
+			err = nla_put_u32(msg, attr, value);
+			break;
+		default:
+			goto nla_put_failure;
+		}
+
+		if (err)
+			goto nla_put_failure;
+	} else {
+		/* Must be config_set command */
+		u8 *val8;
+		u16 *val16;
+		u32 *val32;
+
+		switch (policy.type) {
+		case NLA_U8:
+			val8 = nla_data(info->attrs[attr]);
+			value = *val8;
+			break;
+		case NLA_U16:
+			val16 = nla_data(info->attrs[attr]);
+			value = *val16;
+			break;
+		case NLA_U32:
+			val32 = nla_data(info->attrs[attr]);
+			value = *val32;
+			break;
+		default:
+			goto nla_put_failure;
+		}
+
+		err = ops->config_set(devlink, attr, value, &restart_reqd);
+		if (err)
+			goto nla_put_failure;
+
+		if (restart_reqd) {
+			err = nla_put_u8(msg, DEVLINK_ATTR_RESTART_REQUIRED,
+					 restart_reqd);
+			if (err)
+				goto nla_put_failure;
+		}
+	}
+
+	genlmsg_end(msg, hdr);
+	return 0;
+
+nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+nla_msg_failure:
+	return err;
+}
+
+static int devlink_nl_cmd_config_get_doit(struct sk_buff *skb,
+					  struct genl_info *info)
+{
+	struct devlink *devlink = info->user_ptr[0];
+	struct sk_buff *msg;
+	int err;
+
+	if (!devlink->ops)
+		return -EOPNOTSUPP;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	err = devlink_nl_config_fill(msg, devlink, DEVLINK_CMD_CONFIG_GET,
+				     info);
+
+	if (err) {
+		nlmsg_free(msg);
+		return err;
+	}
+
+	return genlmsg_reply(msg, info);
+}
+
+static int devlink_nl_cmd_config_set_doit(struct sk_buff *skb,
+					  struct genl_info *info)
+{
+	struct devlink *devlink = info->user_ptr[0];
+	struct sk_buff *msg;
+	int err;
+
+	if (!devlink->ops)
+		return -EOPNOTSUPP;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	err = devlink_nl_config_fill(msg, devlink, DEVLINK_CMD_CONFIG_SET,
+				     info);
+
+	if (err) {
+		nlmsg_free(msg);
+		return err;
+	}
+
+	return genlmsg_reply(msg, info);
+}
+
 int devlink_dpipe_match_put(struct sk_buff *skb,
 			    struct devlink_dpipe_match *match)
 {
@@ -2291,6 +2449,41 @@ static const struct nla_policy devlink_nl_policy[DEVLINK_ATTR_MAX + 1] = {
 	[DEVLINK_ATTR_ESWITCH_ENCAP_MODE] = { .type = NLA_U8 },
 	[DEVLINK_ATTR_DPIPE_TABLE_NAME] = { .type = NLA_NUL_STRING },
 	[DEVLINK_ATTR_DPIPE_TABLE_COUNTERS_ENABLED] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_SRIOV_ENABLED] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_NUM_VF_PER_PF] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_MAX_NUM_PF_MSIX_VECT] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_MSIX_VECTORS_PER_VF] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_NPAR_NUM_PARTITIONS_PER_PORT] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_NPAR_BW_IN_PERCENT] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_NPAR_BW_RESERVATION] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_NPAR_BW_RESERVATION_VALID] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_NPAR_BW_LIMIT] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_NPAR_BW_LIMIT_VALID] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_DCBX_MODE] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_RDMA_ENABLED] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_MULTIFUNC_MODE] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_SECURE_NIC_ENABLED] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_IGNORE_ARI_CAPABILITY] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_LLDP_NEAREST_BRIDGE_ENABLED] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_LLDP_NEAREST_NONTPMR_BRIDGE_ENABLED] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_PME_CAPABILITY_ENABLED] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_MAGIC_PACKET_WOL_ENABLED] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_EEE_PWR_SAVE_ENABLED] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_AUTONEG_PROTOCOL] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_MEDIA_AUTO_DETECT] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_PHY_SELECT] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_PRE_OS_LINK_SPEED_D0] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_PRE_OS_LINK_SPEED_D3] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_MBA_ENABLED] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_MBA_BOOT_TYPE] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_MBA_DELAY_TIME] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_MBA_SETUP_HOT_KEY] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_MBA_HIDE_SETUP_PROMPT] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_MBA_BOOT_RETRY_COUNT] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_MBA_VLAN_ENABLED] = { .type = NLA_U8 },
+	[DEVLINK_ATTR_MBA_VLAN_TAG] = { .type = NLA_U16 },
+	[DEVLINK_ATTR_MBA_BOOT_PROTOCOL] = { .type = NLA_U32 },
+	[DEVLINK_ATTR_MBA_LINK_SPEED] = { .type = NLA_U32 },
 };
 
 static const struct genl_ops devlink_nl_ops[] = {
@@ -2451,6 +2644,20 @@ static const struct genl_ops devlink_nl_ops[] = {
 		.flags = GENL_ADMIN_PERM,
 		.internal_flags = DEVLINK_NL_FLAG_NEED_DEVLINK,
 	},
+	{
+		.cmd = DEVLINK_CMD_CONFIG_GET,
+		.doit = devlink_nl_cmd_config_get_doit,
+		.policy = devlink_nl_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = DEVLINK_NL_FLAG_NEED_DEVLINK,
+	},
+	{
+		.cmd = DEVLINK_CMD_CONFIG_SET,
+		.doit = devlink_nl_cmd_config_set_doit,
+		.policy = devlink_nl_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = DEVLINK_NL_FLAG_NEED_DEVLINK,
+	},
 };
 
 static struct genl_family devlink_nl_family __ro_after_init = {
-- 
2.7.4




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux