On Thu, Sep 28, 2017 at 5:54 AM, Qiang <zhengqiang10@xxxxxxxxxx> wrote:
> PCIe PME and hot plug share same interrupt number. In some special case,
> Link down event cause hot plug interrupt, devices is not disconnected,
> But read config will return 0xff.
>
> In that case, PME work function will run and not return Because
> Root Status PME bit always 1 and can not be cleared.
>
> This patch add Root Status check in PME interrupt handler,
> Just do same as pciehp isr Slot status check.
>
> Signed-off-by: Qiang Zheng <zhengqiang10@xxxxxxxxxx>
> ---
> drivers/pci/pcie/pme.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
> index fafdb16..67144f5 100644
> --- a/drivers/pci/pcie/pme.c
> +++ b/drivers/pci/pcie/pme.c
> @@ -273,7 +273,7 @@ static irqreturn_t pcie_pme_irq(int irq, void *context)
> spin_lock_irqsave(&data->lock, flags);
> pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
>
> - if (!(rtsta & PCI_EXP_RTSTA_PME)) {
> + if (rtsta == (u32)(~0) || !(rtsta & PCI_EXP_RTSTA_PME)) {
> spin_unlock_irqrestore(&data->lock, flags);
> return IRQ_NONE;
> }
OK, but isn't there a symbol for all ones in u32? And if there isn't,
what about adding it?
Thanks,
Rafael
