On Wed, Sep 20, 2017 at 08:44:20AM +0200, Sascha El-Sharkawy wrote: > Ensure only valid Kconfig configurations for PCI_REALLOC_ENABLE_AUTO. This > is done by selecting PCI_IOV, which is required by PCI_REALLOC_ENABLE_AUTO > to work. > > Signed-off-by: Sascha El-Sharkawy <elscha@xxxxxxxxxxxxxxxxxxxxx> Applied to pci/virtualization for v4.15, thanks! I had to apply this manually because it wasn't plain ASCII and had CR line endings. But this was small enough to do by hand :) > --- > drivers/pci/Kconfig | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index c32a77fc8b03..675d79c52709 100644 > --- a/drivers/pci/Kconfig > +++ b/drivers/pci/Kconfig > @@ -42,13 +42,13 @@ config PCI_DEBUG > config PCI_REALLOC_ENABLE_AUTO > bool "Enable PCI resource re-allocation detection" > depends on PCI > + depends on PCI_IOV > help > Say Y here if you want the PCI core to detect if PCI resource > re-allocation needs to be enabled. You can always use pci=realloc=on > - or pci=realloc=off to override it. Note this feature is a no-op > - unless PCI_IOV support is also enabled; in that case it will > - automatically re-allocate PCI resources if SR-IOV BARs have not > - been allocated by the BIOS. > + or pci=realloc=off to override it. It will automatically > + re-allocate PCI resources if SR-IOV BARs have not been allocated by > + the BIOS. > > When in doubt, say N. >
