dra7xx has all base address registers (BAR) enabled by default. Reset all
BARs during initialization and so that BARs are enabled only if they are
actually used.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
drivers/pci/dwc/pci-dra7xx.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index f2fc5f47064e..ee61f833b62c 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -335,10 +335,23 @@ static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}
+static void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
+{
+ u32 reg;
+
+ reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+ dw_pcie_writel_dbi2(pci, reg, 0x0);
+ dw_pcie_writel_dbi(pci, reg, 0x0);
+}
+
static void dra7xx_pcie_ep_init(struct dw_pcie_ep *ep)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+ enum pci_barno bar;
+
+ for (bar = BAR_0; bar <= BAR_5; bar++)
+ dw_pcie_ep_reset_bar(pci, bar);
dra7xx_pcie_enable_wrapper_interrupts(dra7xx);
}
--
2.11.0
