Use the newly introduced __pci_epc_mem_init instead of pci_epc_mem_init
to provide page_size to pci_epc_mem. This is in preparation for
adding EP support to K2G which has a restriction that the
address region should be either divided into 1MB/2MB/4MB or 8MB
sizes (Ref: 11.14.4.9.1 Outbound Address Translation in K2G TRM SPRUHY8F
January 2016 – Revised May 2017).
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
drivers/pci/dwc/pcie-designware-ep.c | 3 ++-
drivers/pci/dwc/pcie-designware.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c
index 398406393f37..e70ebe3b9b6f 100644
--- a/drivers/pci/dwc/pcie-designware-ep.c
+++ b/drivers/pci/dwc/pcie-designware-ep.c
@@ -328,7 +328,8 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
if (ret < 0)
epc->max_functions = 1;
- ret = pci_epc_mem_init(epc, ep->phys_base, ep->addr_size);
+ ret = __pci_epc_mem_init(epc, ep->phys_base, ep->addr_size,
+ ep->page_size);
if (ret < 0) {
dev_err(dev, "Failed to initialize address space\n");
return ret;
diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
index b4d2a89f8e58..714f6f21ea93 100644
--- a/drivers/pci/dwc/pcie-designware.h
+++ b/drivers/pci/dwc/pcie-designware.h
@@ -186,6 +186,7 @@ struct dw_pcie_ep {
struct dw_pcie_ep_ops *ops;
phys_addr_t phys_base;
size_t addr_size;
+ size_t page_size;
u8 bar_to_atu[6];
phys_addr_t *outbound_addr;
unsigned long ib_window_map;
--
2.11.0
