Hi Shawn,
Am Donnerstag, 10. August 2017, 16:21:13 CEST schrieb Shawn Lin:
> With CONFIG_DEBUG_SHIRQ enabled, the irq tear down routine
> would still access the irq handler registed as a shard irq.
> Per the comment within the function of __free_irq, it says
> "It's a shared IRQ -- the driver ought to be prepared for
> an IRQ event to happen even now it's being freed". However
> when failing to probe the driver, it may disable the clock
> for accessing the register and the following check for shared
> irq state would call the irq handler which accesses the register
> w/o the clk enabled. That will hang the system forever.
The key point would be to fix the ordering. So you could also just use
devm_add_action to move the clock-disabling into a callback that
gets run at the appropriate time, as devm does the shutdown in the
exact opposite order this should fix your problem.
So until all clocks could be enabled, you would disable them manually
and after that rely on the devm_action to fire at the appropriate time.
ret = clk_prepare_enable(clk1);
if (ret < 0 )
return ret;
ret = clk_prepare_enable(clk2);
if (ret < 0) {
clk_disable_unprepare(clk1);
return ret;
}
devm_add_action_or_reset(dev, rk_pcie_disable_clocks);
The rockchip crypto driver [0] shows how this could be done.
Heiko
[0] http://elixir.free-electrons.com/linux/latest/source/drivers/crypto/rockchip/rk3288_crypto.c#L307
>
> With adding some dump_stack we could see how that happened.
>
> calling rockchip_pcie_driver_init+0x0/0x28 @ 1
> rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
> rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
> rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
> rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted
> 4.13.0-rc3-next-20170807-ARCH+ #189
> Hardware name: Firefly-RK3399 Board (DT)
> Call trace:
> [<ffff000008089bf0>] dump_backtrace+0x0/0x250
> [<ffff000008089eb0>] show_stack+0x20/0x28
> [<ffff000008c3313c>] dump_stack+0x90/0xb0
> [<ffff000008632ad4>] rockchip_pcie_read.isra.11+0x54/0x58
> [<ffff0000086334fc>] rockchip_pcie_client_irq_handler+0x30/0x1a0
> [<ffff00000813ce98>] __free_irq+0x1c8/0x2dc
> [<ffff00000813d044>] free_irq+0x44/0x74
> [<ffff0000081415fc>] devm_irq_release+0x24/0x2c
> [<ffff00000877429c>] release_nodes+0x1d8/0x30c
> [<ffff000008774838>] devres_release_all+0x3c/0x5c
> [<ffff00000876f19c>] driver_probe_device+0x244/0x494
> [<ffff00000876f50c>] __driver_attach+0x120/0x124
> [<ffff00000876cb80>] bus_for_each_dev+0x6c/0xac
> [<ffff00000876e984>] driver_attach+0x2c/0x34
> [<ffff00000876e3a4>] bus_add_driver+0x244/0x2b0
> [<ffff000008770264>] driver_register+0x70/0x110
> [<ffff0000087718b4>] platform_driver_register+0x60/0x6c
> [<ffff0000091eb108>] rockchip_pcie_driver_init+0x20/0x28
> [<ffff000008083a2c>] do_one_initcall+0xc8/0x130
> [<ffff0000091a0ea8>] kernel_init_freeable+0x1a0/0x238
> [<ffff000008c461cc>] kernel_init+0x18/0x108
> [<ffff0000080836c0>] ret_from_fork+0x10/0x50
>
> In order to fix this, we check the clk state before accessing the
> pcie register in rockchip_pcie_read, but don't touch rockchip_pcie_write
> as no case to trigger that from write routine.
>
> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
>
> ---
> Hi Bjorn, Thomas and Marc,
>
> This fix looks more like a hack, but I don't know the legit way to
> deal with that case. Just quick look into the drivers/pci/host, and
> I see almost all drivers register shard irq and also disable the clk
> in their probe's error handle path. So I guess this is NOT pcie-rockchip
> specified even not pcie host drivers specified, but folks just luckily didn't
> trip over it.
>
> Could you give some suggestion on this?
>
> drivers/pci/host/pcie-rockchip.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c
> index 39aafe2..daaa868b 100644
> --- a/drivers/pci/host/pcie-rockchip.c
> +++ b/drivers/pci/host/pcie-rockchip.c
> @@ -17,6 +17,7 @@
>
> #include <linux/bitrev.h>
> #include <linux/clk.h>
> +#include <linux/clk-provider.h>
> #include <linux/delay.h>
> #include <linux/gpio/consumer.h>
> #include <linux/init.h>
> @@ -252,6 +253,9 @@ struct rockchip_pcie {
>
> static u32 rockchip_pcie_read(struct rockchip_pcie *rockchip, u32 reg)
> {
> + if (!__clk_is_enabled(rockchip->hclk_pcie))
> + return 0;
> +
> return readl(rockchip->apb_base + reg);
> }
>
>
