On Sun, Aug 06, 2017 at 10:09:51PM -0400, Sinan Kaya wrote:
We should include some high-level description of the problem we're
trying to solve here.
I *think* the problem is that we do something like this:
- perform an FLR
- sleep up to 1000ms total
- read ~0 from PCI_COMMAND
- warn that the device didn't return from FLR
- touch the device before it's ready
When in fact the device is still initializing after the FLR and would
return CRS status if we looked for it. So we should be looking for
CRS and waiting longer before we start using the device.
> An endpoint is allowed to issue Configuration Request Retry Status (CRS)
> following a Function Level Reset (FLR) request to indicate that it is
> not ready to accept new requests. CRS is defined in PCIe r3.1, sec 2.3.1.
> Request Handling Rules and CRS usage in FLR context is mentioned in
> PCIe r3.1, sec 6.6.2. Function-Level Reset.
>
> A CRS indication will only be given if the address to be read is vendor ID
> register. pci_bus_read_dev_vendor_id() knows how to deal with CRS returned
> 0xFFFF0001 value and will continue polling until a value other than
> 0xFFFF0001 is returned within a given timeout.
>
> Try to discover device presence via CRS if supported. Otherwise, fall
> through to old behavior.
>
> Signed-off-by: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
> ---
> drivers/pci/pci.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index af0cc34..cc9f1c0 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3819,8 +3819,26 @@ int pci_wait_for_pending_transaction(struct pci_dev *dev)
> */
> static void pci_flr_wait(struct pci_dev *dev)
> {
> + u16 root_cap = 0;
> int i = 0;
> u32 id;
> + bool ret;
> +
> + pcie_capability_read_word(dev, PCI_EXP_RTCAP, &root_cap);
> + if (root_cap & PCI_EXP_RTCAP_CRSVIS) {
Why do we want to look at PCI_EXP_RTCAP_CRSVIS here? We don't look at
it in other paths that call pci_bus_read_dev_vendor_id().
> + /* don't touch the HW before waiting 100ms */
I believe this, but would like to include a reference to the section
of the spec that contains this number. Otherwise it's just a magic
number and makes future maintenance hard.
> + msleep(100);
> +
> + /*
> + * Physical functions return from here if found,
> + * virtual functions fall through as they return ~0 on vendor
> + * id read once CRS is completed.
> + */
> + ret = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, &id,
> + 60000);
> + if (ret)
> + return;
> + }
>
> do {
> msleep(100);
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
