On Tue, Jul 25, 2017 at 02:57:46PM -0600, Logan Gunthorpe wrote:
> Add the code to initialize the memory windows in the hardware.
> This includes setting up the requester ID table, and figuring out
> which bar corresponds to which memory window. (Seeing the switch
> can be configured with any number of bars.)
>
> Also, seeing the device doesn't have hardware for scratchpads or
> determining the link status, we create a shared memory window that has
> these features. A magic number with a version copmonent will be used
> to determine if the otherside's driver is actually up.
Using shared memory for SPADS is kind of hacky. We should probably
rework the transport to not need SPADs. I'm fine with this being done
after this series, assuming you are willing to do so.
More comments below
>
> The shared memory window also informs the other side of the
> size and count of the local memory windows.
>
> Signed-off-by: Logan Gunthorpe <logang@xxxxxxxxxxxx>
> Reviewed-by: Stephen Bates <sbates@xxxxxxxxxxxx>
> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@xxxxxxxxxxxxx>
> ---
> drivers/ntb/hw/mscc/switchtec_ntb.c | 355 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 355 insertions(+)
>
> diff --git a/drivers/ntb/hw/mscc/switchtec_ntb.c b/drivers/ntb/hw/mscc/switchtec_ntb.c
> index 253efba72275..1596757413f5 100644
> --- a/drivers/ntb/hw/mscc/switchtec_ntb.c
> +++ b/drivers/ntb/hw/mscc/switchtec_ntb.c
> @@ -15,37 +15,391 @@
>
> #include <linux/switchtec.h>
> #include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/kthread.h>
>
> MODULE_DESCRIPTION("Microsemi Switchtec(tm) NTB Driver");
> MODULE_VERSION("0.1");
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("Microsemi Corporation");
>
> +static bool use_lut_mws;
> +module_param(use_lut_mws, bool, 0644);
> +MODULE_PARM_DESC(use_lut_mws,
> + "Enable the use of the LUT based memory windows");
> +
> +#ifndef ioread64
> +#ifdef readq
> +#define ioread64 readq
> +#else
> +#define ioread64 _ioread64
> +static inline u64 _ioread64(void __iomem *mmio)
> +{
> + u64 low, high;
> +
> + low = ioread32(mmio);
> + high = ioread32(mmio + sizeof(u32));
> + return low | (high << 32);
> +}
> +#endif
> +#endif
> +
> +#ifndef iowrite64
> +#ifdef writeq
> +#define iowrite64 writeq
> +#else
> +#define iowrite64 _iowrite64
> +static inline void _iowrite64(u64 val, void __iomem *mmio)
> +{
> + iowrite32(val, mmio);
> + iowrite32(val >> 32, mmio + sizeof(u32));
> +}
> +#endif
> +#endif
> +
> +#define SWITCHTEC_NTB_MAGIC 0x45CC0001
> +#define MAX_MWS 128
> +
> +struct shared_mw {
> + u32 magic;
> + u32 partition_id;
> + u64 mw_sizes[MAX_MWS];
> +};
> +
> +#define MAX_DIRECT_MW ARRAY_SIZE(((struct ntb_ctrl_regs *)(0))->bar_entry)
> +#define LUT_SIZE SZ_64K
> +
> struct switchtec_ntb {
> struct switchtec_dev *stdev;
> +
> + int self_partition;
> + int peer_partition;
> +
> + struct ntb_info_regs __iomem *mmio_ntb;
> + struct ntb_ctrl_regs __iomem *mmio_ctrl;
> + struct ntb_dbmsg_regs __iomem *mmio_dbmsg;
> + struct ntb_ctrl_regs __iomem *mmio_self_ctrl;
> + struct ntb_ctrl_regs __iomem *mmio_peer_ctrl;
> + struct ntb_dbmsg_regs __iomem *mmio_self_dbmsg;
> +
> + struct shared_mw *self_shared;
> + struct shared_mw __iomem *peer_shared;
> + dma_addr_t self_shared_dma;
> +
> + int nr_direct_mw;
> + int nr_lut_mw;
> + int direct_mw_to_bar[MAX_DIRECT_MW];
> +
> + int peer_nr_direct_mw;
> + int peer_nr_lut_mw;
> + int peer_direct_mw_to_bar[MAX_DIRECT_MW];
> };
>
> +static int switchtec_ntb_part_op(struct switchtec_ntb *sndev,
> + struct ntb_ctrl_regs __iomem *ctl,
> + u32 op, int wait_status)
> +{
> + static const char * const op_text[] = {
> + [NTB_CTRL_PART_OP_LOCK] = "lock",
> + [NTB_CTRL_PART_OP_CFG] = "configure",
> + [NTB_CTRL_PART_OP_RESET] = "reset",
> + };
> +
> + int i;
> + u32 ps;
> + int status;
> +
> + switch (op) {
> + case NTB_CTRL_PART_OP_LOCK:
> + status = NTB_CTRL_PART_STATUS_LOCKING;
> + break;
> + case NTB_CTRL_PART_OP_CFG:
> + status = NTB_CTRL_PART_STATUS_CONFIGURING;
> + break;
> + case NTB_CTRL_PART_OP_RESET:
> + status = NTB_CTRL_PART_STATUS_RESETTING;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + iowrite32(op, &ctl->partition_op);
> +
> + for (i = 0; i < 1000; i++) {
> + if (msleep_interruptible(50) != 0) {
> + iowrite32(NTB_CTRL_PART_OP_RESET, &ctl->partition_op);
> + return -EINTR;
> + }
> +
> + ps = ioread32(&ctl->partition_status) & 0xFFFF;
> +
> + if (ps != status)
> + break;
> + }
> +
> + if (ps == wait_status)
> + return 0;
> +
> + if (ps == status) {
> + dev_err(&sndev->stdev->dev,
> + "Timed out while peforming %s (%d). (%08x)",
> + op_text[op], op,
> + ioread32(&ctl->partition_status));
> +
> + return -ETIMEDOUT;
> + }
> +
> + return -EIO;
> +}
> +
> +static void switchtec_ntb_init_sndev(struct switchtec_ntb *sndev)
> +{
> + u64 part_map;
> +
> + sndev->self_partition = sndev->stdev->partition;
> +
> + sndev->mmio_ntb = sndev->stdev->mmio_ntb;
> + part_map = ioread64(&sndev->mmio_ntb->ep_map);
> + part_map &= ~(1 << sndev->self_partition);
> + sndev->peer_partition = ffs(part_map) - 1;
> +
> + dev_dbg(&sndev->stdev->dev, "Partition ID %d of %d (%llx)",
> + sndev->self_partition, sndev->stdev->partition_count,
> + part_map);
> +
> + sndev->mmio_ctrl = (void * __iomem)sndev->mmio_ntb +
> + SWITCHTEC_NTB_REG_CTRL_OFFSET;
> + sndev->mmio_dbmsg = (void * __iomem)sndev->mmio_ntb +
> + SWITCHTEC_NTB_REG_DBMSG_OFFSET;
> +
> + sndev->mmio_self_ctrl = &sndev->mmio_ctrl[sndev->self_partition];
> + sndev->mmio_peer_ctrl = &sndev->mmio_ctrl[sndev->peer_partition];
> + sndev->mmio_self_dbmsg = &sndev->mmio_dbmsg[sndev->self_partition];
> +}
> +
> +static int map_bars(int *map, struct ntb_ctrl_regs __iomem *ctrl)
> +{
> + int i;
> + int cnt = 0;
> +
> + for (i = 0; i < ARRAY_SIZE(ctrl->bar_entry); i++) {
> + u32 r = ioread32(&ctrl->bar_entry[i].ctl);
> +
> + if (r & NTB_CTRL_BAR_VALID)
> + map[cnt++] = i;
> + }
> +
> + return cnt;
> +}
> +
> +static void switchtec_ntb_init_mw(struct switchtec_ntb *sndev)
> +{
> + sndev->nr_direct_mw = map_bars(sndev->direct_mw_to_bar,
> + sndev->mmio_self_ctrl);
> +
> + sndev->nr_lut_mw = ioread16(&sndev->mmio_self_ctrl->lut_table_entries);
> + sndev->nr_lut_mw = rounddown_pow_of_two(sndev->nr_lut_mw);
> +
> + dev_dbg(&sndev->stdev->dev, "MWs: %d direct, %d lut",
> + sndev->nr_direct_mw, sndev->nr_lut_mw);
> +
> + sndev->peer_nr_direct_mw = map_bars(sndev->peer_direct_mw_to_bar,
> + sndev->mmio_peer_ctrl);
> +
> + sndev->peer_nr_lut_mw =
> + ioread16(&sndev->mmio_peer_ctrl->lut_table_entries);
> + sndev->peer_nr_lut_mw = rounddown_pow_of_two(sndev->peer_nr_lut_mw);
> +
> + dev_dbg(&sndev->stdev->dev, "Peer MWs: %d direct, %d lut",
> + sndev->peer_nr_direct_mw, sndev->peer_nr_lut_mw);
> +
> +}
> +
> +static int switchtec_ntb_init_req_id_table(struct switchtec_ntb *sndev)
> +{
> + int rc = 0;
> + u16 req_id = ioread16(&sndev->mmio_ntb->requester_id);
Nit, please don't do function calls in the variable declaration. If
this doesn't violate Linux coding style, then it should :)
> + u32 error;
> +
> + if (ioread32(&sndev->mmio_self_ctrl->req_id_table_size) < 2) {
> + dev_err(&sndev->stdev->dev,
> + "Not enough requester IDs available.");
> + return -EFAULT;
> + }
> +
> + rc = switchtec_ntb_part_op(sndev, sndev->mmio_self_ctrl,
> + NTB_CTRL_PART_OP_LOCK,
> + NTB_CTRL_PART_STATUS_LOCKED);
> + if (rc)
> + return rc;
> +
> + iowrite32(NTB_PART_CTRL_ID_PROT_DIS,
> + &sndev->mmio_self_ctrl->partition_ctrl);
> +
> + // Root Complex Requester ID
Please use standard /**/ comments (same for below)
> + iowrite32(0 << 16 | NTB_CTRL_REQ_ID_EN,
0? A comment here on 0 might be needed.
> + &sndev->mmio_self_ctrl->req_id_table[0]);
> +
> + // Host Bridge Requester ID
> + iowrite32(req_id << 16 | NTB_CTRL_REQ_ID_EN,
> + &sndev->mmio_self_ctrl->req_id_table[1]);
> +
> + rc = switchtec_ntb_part_op(sndev, sndev->mmio_self_ctrl,
> + NTB_CTRL_PART_OP_CFG,
> + NTB_CTRL_PART_STATUS_NORMAL);
> +
nit, remove this new line
> + if (rc == -EIO) {
> + error = ioread32(&sndev->mmio_self_ctrl->req_id_error);
> + dev_err(&sndev->stdev->dev,
> + "Error setting up the requester ID table: %08x",
> + error);
> + }
> +
> + return rc;
> +}
> +
> +static void switchtec_ntb_init_shared(struct switchtec_ntb *sndev)
> +{
> + int i;
> +
> + memset(sndev->self_shared, 0, LUT_SIZE);
> + sndev->self_shared->magic = SWITCHTEC_NTB_MAGIC;
> + sndev->self_shared->partition_id = sndev->stdev->partition;
> +
> + for (i = 0; i < sndev->nr_direct_mw; i++) {
> + int bar = sndev->direct_mw_to_bar[i];
> + resource_size_t sz = pci_resource_len(sndev->stdev->pdev, bar);
> +
> + if (i == 0)
> + sz = min_t(resource_size_t, sz,
> + LUT_SIZE * sndev->nr_lut_mw);
> +
> + sndev->self_shared->mw_sizes[i] = sz;
> + }
> +
> + for (i = 0; i < sndev->nr_lut_mw; i++) {
> + int idx = sndev->nr_direct_mw + i;
> +
> + sndev->self_shared->mw_sizes[idx] = LUT_SIZE;
> + }
> +}
> +
> +static int switchtec_ntb_init_shared_mw(struct switchtec_ntb *sndev)
> +{
> + struct ntb_ctrl_regs __iomem *ctl = sndev->mmio_peer_ctrl;
> + int bar = sndev->direct_mw_to_bar[0];
> + u32 ctl_val;
> + int rc;
> +
> + sndev->self_shared = dma_zalloc_coherent(&sndev->stdev->pdev->dev,
> + LUT_SIZE,
> + &sndev->self_shared_dma,
> + GFP_KERNEL);
> + if (!sndev->self_shared) {
> + dev_err(&sndev->stdev->dev,
> + "unable to allocate memory for shared mw");
> + return -ENOMEM;
> + }
> +
> + switchtec_ntb_init_shared(sndev);
> +
> + rc = switchtec_ntb_part_op(sndev, ctl, NTB_CTRL_PART_OP_LOCK,
> + NTB_CTRL_PART_STATUS_LOCKED);
> + if (rc)
> + goto unalloc_and_exit;
> +
> + ctl_val = ioread32(&ctl->bar_entry[bar].ctl);
> + ctl_val |= NTB_CTRL_BAR_LUT_WIN_EN;
> + ctl_val &= 0xFF;
This seems odd ordering. Don't you want to clear the unnecessary bits
before adding new ones? If so, maybe flip the 2 lines above.
> + ctl_val |= ilog2(LUT_SIZE) << 8;
> + ctl_val |= (sndev->nr_lut_mw - 1) << 14;
> + iowrite32(ctl_val, &ctl->bar_entry[bar].ctl);
> +
> + iowrite64((NTB_CTRL_LUT_EN | (sndev->self_partition << 1) |
> + sndev->self_shared_dma),
> + &ctl->lut_entry[0]);
> +
> + rc = switchtec_ntb_part_op(sndev, ctl, NTB_CTRL_PART_OP_CFG,
> + NTB_CTRL_PART_STATUS_NORMAL);
> + if (rc) {
> + u32 bar_error, lut_error;
> +
> + bar_error = ioread32(&ctl->bar_error);
> + lut_error = ioread32(&ctl->lut_error);
> + dev_err(&sndev->stdev->dev,
> + "Error setting up shared MW: %08x / %08x",
> + bar_error, lut_error);
> + goto unalloc_and_exit;
> + }
> +
> + sndev->peer_shared = pci_iomap(sndev->stdev->pdev, bar, LUT_SIZE);
> + if (!sndev->peer_shared) {
> + rc = -ENOMEM;
> + goto unalloc_and_exit;
> + }
> +
> + dev_dbg(&sndev->stdev->dev, "Shared MW Ready");
> + return 0;
> +
> +unalloc_and_exit:
> + dma_free_coherent(&sndev->stdev->pdev->dev, LUT_SIZE,
> + sndev->self_shared, sndev->self_shared_dma);
> +
> + return rc;
> +}
> +
> +static void switchtec_ntb_deinit_shared_mw(struct switchtec_ntb *sndev)
> +{
> + if (sndev->peer_shared)
> + pci_iounmap(sndev->stdev->pdev, sndev->peer_shared);
> +
> + if (sndev->self_shared)
> + dma_free_coherent(&sndev->stdev->pdev->dev, LUT_SIZE,
> + sndev->self_shared,
> + sndev->self_shared_dma);
> +}
> +
> static int switchtec_ntb_add(struct device *dev,
> struct class_interface *class_intf)
> {
> struct switchtec_dev *stdev = to_stdev(dev);
> struct switchtec_ntb *sndev;
> + int rc;
>
> stdev->sndev = NULL;
>
> if (stdev->pdev->class != MICROSEMI_NTB_CLASSCODE)
> return -ENODEV;
>
> + if (stdev->partition_count != 2)
> + dev_warn(dev, "ntb driver only supports 2 partitions");
> +
> sndev = kzalloc_node(sizeof(*sndev), GFP_KERNEL, dev_to_node(dev));
> if (!sndev)
> return -ENOMEM;
>
> sndev->stdev = stdev;
>
> + switchtec_ntb_init_sndev(sndev);
> + switchtec_ntb_init_mw(sndev);
> +
> + rc = switchtec_ntb_init_req_id_table(sndev);
> + if (rc)
> + goto free_and_exit;
> +
> + rc = switchtec_ntb_init_shared_mw(sndev);
> + if (rc)
> + goto free_and_exit;
> +
> stdev->sndev = sndev;
> dev_info(dev, "NTB device registered");
>
> return 0;
> +
> +free_and_exit:
> + kfree(sndev);
> + dev_err(dev, "failed to register ntb device: %d", rc);
> + return rc;
> }
>
> void switchtec_ntb_remove(struct device *dev,
> @@ -58,6 +412,7 @@ void switchtec_ntb_remove(struct device *dev,
> return;
>
> stdev->sndev = NULL;
> + switchtec_ntb_deinit_shared_mw(sndev);
> kfree(sndev);
> dev_info(dev, "ntb device unregistered");
> }
> --
> 2.11.0
>
> --
> You received this message because you are subscribed to the Google Groups "linux-ntb" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-ntb+unsubscribe@xxxxxxxxxxxxxxxx.
> To post to this group, send email to linux-ntb@xxxxxxxxxxxxxxxx.
> To view this discussion on the web visit https://groups.google.com/d/msgid/linux-ntb/20170725205753.4735-10-logang%40deltatee.com.
> For more options, visit https://groups.google.com/d/optout.
