v2: dt-bindings: phy: qmp: Add output-clock-names Added Rob H's Ack dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074 Removed example Added IPQ8074 specific details phy: qcom-qmp: Fix phy pipe clock name Added Vivek's Ack phy: qcom-qmp: Handle unavailable registers No changes phy: qcom-qmp: Add support for IPQ8074 No changes PCI: dwc: qcom: Use block IP version for operations Added new patch to use block IP version instead of v1, v2... dt-bindings: pci: qcom: Add support for IPQ8074 Removed example Added IPQ8074 specific details PCI: dwc: qcom: Add support for IPQ8074 PCIe controller Incorporated Bjorn's feedback:- - Removed reset names, helper function to assert/deassert, helper function to R/M/W register. - Renamed sys_noc clock as iface clock - Added deinit if phy power on fails v1: Add definitions required to enable QMP phy support for IPQ8074. Add support for the IPQ8074 PCIe controller. IPQ8074 supports Gen 1/2, one lane, two PCIe root complex with support for MSI and legacy interrupts, and it conforms to PCI Express Base 2.1 specification. Varadarajan Narayanan (8): dt-bindings: phy: qmp: Add output-clock-names dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074 phy: qcom-qmp: Fix phy pipe clock name phy: qcom-qmp: Handle unavailable registers phy: qcom-qmp: Add support for IPQ8074 PCI: dwc: qcom: Use block IP version for operations dt-bindings: pci: qcom: Add support for IPQ8074 PCI: dwc: qcom: Add support for IPQ8074 PCIe controller .../devicetree/bindings/pci/qcom,pcie.txt | 23 ++ .../devicetree/bindings/phy/qcom-qmp-phy.txt | 11 + drivers/pci/dwc/pcie-qcom.c | 369 +++++++++++++++++---- drivers/phy/qualcomm/phy-qcom-qmp.c | 186 +++++++++-- 4 files changed, 506 insertions(+), 83 deletions(-) -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
