Hi,
On Mon, Jul 17, 2017 at 5:33 PM, Varadarajan Narayanan
<varada@xxxxxxxxxxxxxx> wrote:
> Presently, the phy pipe clock's name is assumed to be either
> usb3_phy_pipe_clk_src or pcie_XX_pipe_clk_src (where XX is the
> phy lane's number). However, this will not work if an SoC has
> more than one instance of the phy. Hence, instead of assuming
> the name of the clock, fetch it from the DT.
>
> Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx>
> ---
Looks good.
Acked-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
> drivers/phy/qualcomm/phy-qcom-qmp.c | 28 ++++++++++++++++------------
> 1 file changed, 16 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 78ca628..97020ec 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -925,20 +925,13 @@ static int qcom_qmp_phy_clk_init(struct device *dev)
> * clk | +-------+ | +-----+
> * +---------------+
> */
> -static int phy_pipe_clk_register(struct qcom_qmp *qmp, int id)
> +static int phy_pipe_clk_register(struct qcom_qmp *qmp, const char *clk_name)
> {
> - char name[24];
> struct clk_fixed_rate *fixed;
> struct clk_init_data init = { };
>
> - switch (qmp->cfg->type) {
> - case PHY_TYPE_USB3:
> - snprintf(name, sizeof(name), "usb3_phy_pipe_clk_src");
> - break;
> - case PHY_TYPE_PCIE:
> - snprintf(name, sizeof(name), "pcie_%d_pipe_clk_src", id);
> - break;
> - default:
> + if ((qmp->cfg->type != PHY_TYPE_USB3) &&
> + (qmp->cfg->type != PHY_TYPE_PCIE)) {
> /* not all phys register pipe clocks, so return success */
> return 0;
> }
> @@ -947,7 +940,7 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, int id)
> if (!fixed)
> return -ENOMEM;
>
> - init.name = name;
> + init.name = clk_name;
> init.ops = &clk_fixed_rate_ops;
>
> /* controllers using QMP phys use 125MHz pipe clock interface */
> @@ -1110,6 +1103,8 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
>
> id = 0;
> for_each_available_child_of_node(dev->of_node, child) {
> + const char *clk_name;
> +
> /* Create per-lane phy */
> ret = qcom_qmp_phy_create(dev, child, id);
> if (ret) {
> @@ -1118,11 +1113,20 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = of_property_read_string(child, "clock-output-names",
> + &clk_name);
> + if (ret) {
> + dev_err(dev,
> + "failed to get clock-output-names for lane%d phy, %d\n",
> + id, ret);
> + return ret;
> + }
> +
> /*
> * Register the pipe clock provided by phy.
> * See function description to see details of this pipe clock.
> */
> - ret = phy_pipe_clk_register(qmp, id);
> + ret = phy_pipe_clk_register(qmp, clk_name);
> if (ret) {
> dev_err(qmp->dev,
> "failed to register pipe clock source\n");
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
