On Thu, Jun 29, 2017 at 09:21:28AM +0800, Shawn Lin wrote: > PCIe connector provide a optional 12V power supply for high > power downstream components, so we add this as a optional > one if we need to control it. > > Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> Applied patches 1 & 2 with Rob's ack to pci/host-rockchip for v4.14, thanks! > --- > > Documentation/devicetree/bindings/pci/rockchip-pcie.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt > index 1453a73..9b88959 100644 > --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt > @@ -47,6 +47,7 @@ Optional Property: > using 24MHz OSC for RC's PHY. > - ep-gpios: contain the entry for pre-reset gpio > - num-lanes: number of lanes to use > +- vpcie12v-supply: The phandle to the 12v regulator to use for PCIe. > - vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe. > - vpcie1v8-supply: The phandle to the 1.8v regulator to use for PCIe. > - vpcie0v9-supply: The phandle to the 0.9v regulator to use for PCIe. > -- > 1.9.1 > >
