On Wed, Jun 28, 2017 at 09:26:47PM -0600, Logan Gunthorpe wrote:
> The switchtec hardware has two types of memory windows: LUTs and Direct.
> The first area in each BAR is for LUT windows and the remaining area is
> for the direct region. The total number of LUT entries is set by a
> configuration setting in hardware and they all must be the same
> size. (This is fixed by switchtec_ntb to be 64K.)
>
> switchtec_ntb enables the LUTs only for the first bar and enables the
s/bar/BAR/
> highest power of two possible. Seeing the LUTs are at the beginning of
> the BAR, the direct memory window's alignment is affected. Therefore,
> the maximum direct memory window size can not be greater than the number
> of LUTs times 64K. The direct window in other bars will not have this
s/bars/BARs/
> restriction as the LUTs will not be enabled there. LUTs will only be
> exposed through the NTB api if the use_lut_mw parameter is set.
s/api/API/
> Seeing the switchtec hardware, by default, configures BARs to be 4G a
> module parameter is given to limit the size of the advertised memory
> windows. Higher layers tend to allocate the maximum BAR size and this
> has a tendancy of failing when they try to allocate 4GB of continuous
> memory.
s/tendancy/tendency/
s/of failing/to fail/
s/continuous/contiguous/
> Signed-off-by: Logan Gunthorpe <logang@xxxxxxxxxxxx>
> Reviewed-by: Stephen Bates <sbates@xxxxxxxxxxxx>
> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@xxxxxxxxxxxxx>
> ---
> drivers/ntb/hw/mscc/switchtec_ntb.c | 205 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 202 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/ntb/hw/mscc/switchtec_ntb.c b/drivers/ntb/hw/mscc/switchtec_ntb.c
> index a42e80742b52..5f9118940a24 100644
> --- a/drivers/ntb/hw/mscc/switchtec_ntb.c
> +++ b/drivers/ntb/hw/mscc/switchtec_ntb.c
> @@ -25,6 +25,11 @@ MODULE_VERSION("0.1");
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("Microsemi Corporation");
>
> +static ulong max_mw_size = SZ_2M;
> +module_param(max_mw_size, ulong, 0644);
> +MODULE_PARM_DESC(max_mw_size,
> + "Limit the size of the memory windows reported to the upper layer");
Maybe the description should be "Max window size reported ..."?
"Limit the size ..." sounds like it could be a boolean.
